8313/02 FG Crankshaft for Solo 108 FG - 1pce.

€169.60*

Prices incl. VAT plus shipping costs

Available

Product number: fg_8313_02

EAN: 4058575005216

Product information "8313/02 FG Crankshaft for Solo 108 FG - 1pce."

Spare part for Solo engines.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

8311 FG Piston bolt retaining clip for Solo - 2 pcs.

Spare part for Solo engines.

€2.90*

8310 FG Piston bolt for Solo - 1pce.

Spare part for Solo engines.

€7.80*

8312 FG Needle bearing for Solo - 1pce.

Spare part for Solo engines.

€12.40*

8308 FG Piston for Solo - 1pce.

Spare part for Solo engines.

€55.20*

8338 FG Carburetor support - 1pce.

Spare part for Solo engines.

€5.50*

8319/02 FG Tuning cooling fan, red, for Solo - 1pce.

Spare part for Solo engines.

€69.70*

8323/05 FG Spacer for Solo, set

Original FG spare part for solo engines. 1 set See photo for scope of delivery.

€5.99*

8308/2 FG Solo piston, 1 piece

Original Fg spare part for solo engines. 1 piece

€37.60*

8313/01 FG Key for crankshaft, Solo - 1pce.

Spare part for Solo engines.

€4.30*

8318 FG Dowel screw for clutch blocks Solo - 2pcs.

Spare part for Solo engines.Part is delivered in silver or black color from vendor!

€7.10*

8328/02 FG Mounting parts for ignition coil for Solo - 1pce.

Spare part for Solo engines.

€13.80*

8328/01 FG Cable for Solo - 1pce.

Spare part for Solo engines.

€16.00*

Customers also viewed

500405451 Carson CY5 Linkage set

Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 set

€39.90*

8308/06 FG Tuning piston 99 for Solo - 1pce.

Spare part for Solo engines.

€50.80*

10071 FG Clutch carrier for Solo - 1pce.

Fits formula 1 cars only.

€25.50*

Carburetor Walbro WT 603B with choke, ball-raced

7355/08 Carburetor type: Walbro WT 603BStandard carburetor for Zenoah G230/260. Carb has integrated choke. Typ: Walbro WT603B y0036/01 Ball-raced tuning carburetor Walbro WT 603B-RacingWith dual ball bearings on the throttle shaft. Two sealed bearings 2RS type (3/16" x 5/16" x 1/8") shielded by two steel plates (5 x 8 x 0.3 mm). High quality processed and optimized for racing use! The soft stock screw holding the throttle lever has been replaced with a high strength Allen key screw. Since all screws on the carb are imperial sized, so is the key for this screw. A corresponding bit is included in our tool set y0785, or you can use Allen key wrench y0037/03 as well. Ball-raced Zenoah G230/260 stock carburetor. Fits all Zenoah G230/240/260/270/290/320 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.Normal:Ball-raced:

€88.90*

Details

FG Sportsline 2WD-465 with Porsche GT2 body shell, 23cm³ Engine

The 2WD-465 Sportsline model is built on the short chassis with double a-arms suspension front and rear. The vehicle is equippedwith the 2-shocks front suspension as standard, which ensures optimum traction for both front wheels.On the GT2, the front axle has been widened to 384 mm. The rear axle is 395 mm wide.Technical description:The model has a 465 wheelbase. The models are built on a 4mm alloy chassis with double wishbones at front and rear axle. All borings of the alloy chassis are countersunk to prevent the screw heads from bearing out. The models are serial equipped with the 2-damper front axle which guarantees an optimal traction of both front wheels. At the front/rear axle you can adjust through track rods or adjusting screws with right-/left-handed thread the king pin angle, trailing effect and toe-in. Further equipment points are front disk brakes, differential gear, easy-running FG ball drive, alloy brake calliper with big brake disk, stabilizer bar front and rear, tuned pipe muffler, rear brace, 24T steel pinion, spark plug cap suppression cover, latest version (Evo) oil-pressure shock absorbers with volume control and external adjusting ring for the initial spring preload. All rotating parts as shafts, axles and clutch bells a.s.o. are supported by ball bearings. You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 23ccm combustion engine. The engine needs a 2-stroke petrol oil mixture. One tank filling gives you about 45 minutes driving fun. The power is transmitted over the well-tried system: from the engine over the 2-block clutch over radial tooth wheels on to the rear axle which is equipped with the bevel differential gear with pluggable axles. RC-plate with receiver box.To complete the models all merchantable servos and radio control systems are suitable. The RTR version comes with complete factory installed rc-system, including Ni-Cads! The car comes with an unpainted body shell.The FG 5164 decor sheet is not included!Also available painted in the shop selection!Dimensions: Length: 840 mm Width: 395 mm Height: 250 mm Wheelbase: 465 mm Touring cars in action!Painting tips:

From €1,159.95*

Configure now