7080 FG Rear dogbone 90 mm

€23.90*

Available

Product number: fg_7080

EAN: 3410564514696

Product information "7080 FG Rear dogbone 90 mm"

Genuine FG spare/option part.

Standard driveshaft, short version.
Fits FG Audi, BMW 320, Peugeot 307, Renault Megane und VW New Beetle.

Dimensions:

Shaft diameter: 7 mm
Ball diameter: 10 mm
Length: 90 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

y1188 Pin 4 x 18 mm, 10 pcs.

Hardened steel pins to replace lost or worn pins in driveshafts (dog bones) on FG / Carson / Smartech cars.It is recommended to use high strength thread locking compound for the installation.

€3.90*

y1218 Springs for drive shafts

Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Customers also bought

8058 FG Body set BMW E30, painted 2 mm

Genuine FG spare/option part. The body set contents the main part, front body and the rear wing. The body is painted and decorated with stickers. Required body mounts:Mount front: FG 7020/06 Front bumperRear body mount: FG 7152/01 Rear body mountSide body mount front: FG 3014 Body mountsSide body mount rear: FG 3014 Body mountsDimensions:Length: 870 mmWidth: 392 mmHeight: 260 mmWheelbase: 510 mmContents:1 piece

€299.99*

7020/05 FG Front bumper for CLK-DTM

Genuine FG spare/option part. Suitable for CLK-DTM.Dimensions:Length: 100 mmWidth: 360 mmContents:1 piece

€29.90*

7152/01 FG Extended rear mount

Genuine FG spare/option part. Fits all touring cars and Porsche 530.( Not for Mini Cooper und Porsche 465/510.)Contents:1 piece

€19.90*

3014 FG Body mounts middle/rear

Genuine FG spare/option part. Contents:2 pieces

€17.90*

7072/01 FG Adjustable rear lower wishone for 1:5

Genuine FG spare/option part.Contents:1 piece

€19.90*

- PMT - Supreme V4-Q01 (Super Soft)

Exciting news for the modeling world: Introducing the new 1:5 Supreme V4.With a fresh design and innovative tread patterns for even higher performance. We are thrilled to present the 1:5 Supreme V4 – our revolutionary tire for the world of four-wheeled modeling. The new V4 aims to raise the bar in competitions and cater to the needs of drivers. It features a redesigned tread with new patterns meticulously crafted for enhanced performance. Let’s see its key features: Exceptional Grip: Advanced tread patterns for unparalleled traction on various asphalt conditions. Simplified Driving: Superior control for a smoother and more effective driving experience. Enhanced Durability: Thanks to the new tread design, the tire’s performance remains consistent even in longer sessions. Available in Three Different Compounds. Like all our products, the V4 is available in various compounds to accommodate different asphalt conditions: - Q01 – SuperSoft - Q03 – Soft - Q05 – Medium Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability.Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Dimension:Outside diameter: approx. 116 mmWidth: approx. 65 mmRims: 18 mm square driveContents:2 piece

€38.90*

Details

Similar products

y1004 Driveshaft boots for ball drive + dogbones

Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

68277 FG Front driveshaft 4WD

Genuine FG spare/option part.Dimensions:Diameter: 7,10 mmTotal length: 107,5 mmContents:1 piece

€17.50*

6069/01 FG Differential axle spline drive

Genuine FG spare/option part.For all FG cars with standard drive shafts (no ball drive). Accepts dogbones with 10 mm ball and 4 mm pin.Dimensions:Shaft, diameter: 8 mmLength: 27 mmSpline drive for FG bevel gearsCup, diameter: 18,5 mmLength 14 mmContents:1 piece

€29.00*

6080 FG Rear dogbone

Genuine FG spare/option part. Replacement drive shaft (dogbone). Long Version.Suitable for BMW GTR, Mercedes CLK-GTR, Race-Trucks, C291, Porsche GT1, GT2, GT3 and all FG Off-Road models.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 101,5 mmContents:1 piece

€19.00*

y1004/01 Driveshaft boots for ball drive and dogbones

Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt.For FG and Carson ball drives, fits standard dogbones as well.Content10 pieces

€34.90*

y67577 Drive shaft 132 mm

Genuine HT spare/option part. Dimensions:Total length: approx. 132 mmLength center pin / center pin: approx. 123 mmShaft diameter: approx. 6 mmBall diameter: approx. 9,8 mmPlease note:If you own a Leopard 2WD with the old 130.5 mm driveshafts, the swap of both shafts is recommended.Contents:1 piece

€9.90*

67577 FG Drive shaft 134 mm

Genuine FG spare/option part. Please note: If you own a Leopard 2WD with the old 130.5 mm driveshafts (same part number), the upgrade of both shafts is recommended.Contents:1 piece

€19.90*

68276 FG Front wheel shaft 2WD/4WD

Genuine FG spare/option part. Diameter 8 mm.Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.90*

y1345 Drive pins, choice of sizes, e.g. for Losi, Mini and HPI cars

y1345 Size: y1345/04 - 5 x 24 mm

Genuine HT spare/option part. Hardened pins made of 100Cr6 steel for driveshafts, differentials, wheel drives and similar applications. Pack of ten. Sizes available:y1345/01: 4 x 18 mm, e.g. for Losi 5ive-T/Mini and HPI Baja differentials or HPI Baja layshafty1345/02: 4 x 20 mm, e.g. for Losi 5ive-T/Mini CVD jointsy1345/03: 4 x 24 mm, e.g. for Losi DBXL and HPI Baja wheel hexy1345/04: 5 x 24 mm, e.g. for Losi 5ive-T/Mini wheel hexContents:10 pieces

€4.90*

7081 FG Rear dogbone 96 mm

Genuine FG spare/option part.Standard driveshaft, medium length. Fits BMW M3 GTR, Mercedes C-Klasse DTM 04, Mercedes CLK-DTM, McLaren GT, Honda Accord, Dogde Viper, Opel V8 und Porsche Carrera GT.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 96 mmContents:1 piece

€25.00*

67576 FG Driving shaft 142 mm

Genuine FG spare/option part.Spare part for Sportsline Leopard 4WD.Contents:1 piece

€19.90*

Customers also viewed

500405455 Carson Dog bone

Genuine Carson spare/option part. Fits CY-Eline models.Contents:2 pieces

€34.90*

GWH79 GRP 1:6 Buggy "GRIP" tire glued, 18mm square, 2 pcs.

grp_w79 Rubber compunt: Extra Soft - GWH79X

Item N° GWH79 GRP 1:6 Buggy "GRIP" tire glued, 2 pcs.very aggressive bold x-pattern treadmoderate directional stabilityvery good lateral tractionvery good propulsionfor really loose surfacesTire diameter: 164 mm Tire width: 61 mmDue to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Attention:On all 2WD cars (except Leopard 2WD) the front suspension must be equipped with the combination of uprights y0932 and steering rods FG #7028/01. Wheel squares FG #6107/02 must be used in front and rear. 4WD cars must only use the wheel squares FG #6107/02 in front and rear.

€39.90*

2012-132 Mecatech Drive Shaft

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

7081/01 FG Driveshaft for ball drive, 91 mm

Genuine FG spare/option part. Replacement ball driveshaft, medium versionSuitable for BMW M3 GTR, Mercedes C-Class DTM 04, Mercedes CLK-DTM, McLaren GT, Honda Accord, Dogde Viper, Opel V8 and Porsche Carrera GT.Shaft diameter: 6,5mmBall diameter: 12mmLength: 91mmContents:1 piece

€25.00*

GPM 9471 Ball drive conversion kit for FG and Mecatech touring cars and gt-models

FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218

€149.90*

32569 Brake disk

Genuine Smartech spare/option part.Dimensions: Diameter: 36 mm Square size: 15 mmContent:2 pieces

€19.90*