68266, FG A-arm, front upper 4WD, plastic, 2 pcs.

€19.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_68266

EAN: 3410564533437

Product information "68266, FG A-arm, front upper 4WD, plastic, 2 pcs."

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Alternatives

y68412 Front upper alloy wishbones 4WD

Genuine HT spare/option part. Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster-/ Stadium- Modelle 4WD RTR, 4WD Porsche and Mini. Set included:2 x Front upper alloy wishbones2 x Aluminum balljointsBushingsScrewsTaper disksContents:1 set

€119.90*

y2002 Alloy a-arm, front upper FG 4WD/Leopard 2WD

Genuine HT spare/option part.Alloy a-arm front upper for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster-/ Stadium- Modelle 4WD RTR, 4WD Porsche and Mini. Replacement for FG item No.: 66266Contents:1 piece

€34.90*

Similar products

68277 FG Front driveshaft 4WD

Genuine FG spare/option part.Dimensions:Diameter: 7,10 mmTotal length: 107,5 mmContents:1 piece

€15.90*

68216 FG Layshaft 4WD

Genuine FG spare/option part.Dimensions:Diameter: 10 mmLength: 94 mmContents:1 piece

€13.90*

68253 FG Idler pulley 16mm, plastic

Genuine FG spare/option part. Contents:1 piece

€4.90*

68325/01, FG Servo saver spring blue

Springs with different hardnesses for servo saver item-no. FG 68420.Red = soft, for budget-priced RTR servos with plastic gear.Blue = medium, for high-quality competition servos.Content:1 piece

€6.90*

68328 FG Disk for tension sleeve

Genuine FG spare/option part.Fits Sportsline Leopard 4WD.Contents:1 piece

€3.50*

68250/01 FG Plastic front axle housing left, 1:6, 1 pce.

Item N° 68250/01 Plastic front axle housing left,1:6, 1 pce.This closed front axle housing reduces the entry of dirt in the belt drive. Suitable for all 4WD Off-Road and Monster models as well as for the 2WD Off-Road and Monster models WB535.

€21.90*

68251/01 FG Front axle housing, r/h 4WD 1:6, plastic

Genuine FG spare/option part.Contents:1 piece

€21.90*

68276 FG Front wheel shaft 2WD/4WD

Genuine FG spare/option part. Diameter 8 mm.Contents:1 pieceFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€18.90*

68215, FG Engine mount large 4WD, plastic, 1 pce.

€17.90*

68240/01 FG Washer for RC-plate 4WD, 1 pce.

€2.80*

68305 FG Damper spring 2,0x60mm, 2pcs.

Item N° 68305 Damper spring 2,0x60mm, 2pcs.

€13.90*

68150/01 FG Body shell Off-Road Buggy 4WD, clear - 1 pcs.

he bodyshell is made from clear unpainted polycarbonate and it´s only for 4WD models.Length 500 mmWidth 285 mmHeight 155 mmPainting tips:

€112.40*

Customers also viewed

y68412 Front upper alloy wishbones 4WD

€119.90*

68265/01 FG Front lower plastic wishbone 4WD, 1:6

Genuine FG spare/option part.New version with more steering.Contents:2 pieces

€23.90*

FG Sportsline 4WD-510 with BMW E30 body HT-Edition

The first 1/5 touring and sports car designed as a 4WD from the ground up. With a wheelbase of 510mm the 4WD chassis is suitable for the FG Mini Cooper, BMW E30 and the FG Porsche GT3 RSR bodies. Equipped with a strong 26 cm³ engine, tuning pipe, tank with quick acting closure, 2 differential gears, front disk brake and a lot more. However, the highlight is still the well-known FG 4WD. Maximum traction, easy handling and grip during cornering as well, these are the advantages only a 4WD model can offer.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with 2.4 GHz radio control system, servos, batteries in our configurator.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description of the 4WD Sportsline Mini Cooper:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder optional painted polycarbonate bodyshell with decals and with the RTR version the 2.4 GHz pistol grip radio control system with steering and gas servoDimensions: Length: 780 mm Width: 405 mm Height: 250 mm Wheelbase: 510 mm HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURTouring cars in action!Painting tips:

From €1,449.95*

Configure now