66287/01 FG Shock tower front Monster / Stadium 4WD

€17.90*

Available

Product number: fg_66287_01

EAN: 3410564530887

Product information "66287/01 FG Shock tower front Monster / Stadium 4WD"

Genuine FG spare/option part.

Alternatively this 4WD shock tower is also available as an aluminum version: y0563.

Content:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Alternatives

y0563 Alloy front shock tower for 4WD FG-Monster/Stadiuim/Beetle Leopard cars

Genuine HT spare/option part. Milled to reduce weight; replaces plastic part FG #66287/01. Comes complete with all necessary mounting hardware included.Fits Leopard Sportsline 2WD and 4WD.Scope of delivery:1x Alloy front shock tower4x Socket head cap screws 4x143x Countersunk screws 4x144x Washers steel 4,3Contents:1 piece

€79.90*

Similar products

66287 FG Shock tower front 2WD/4WD

Genuine FG spare/option part. FG Shock tower front 2WD/4WDFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.Contents:1 piece

€9.90*

Details

66270/03, FG Plastic steering stop for 2WD/4WD, 2 pcs.

Genuine FG spare/option part. Measures:Length: 40mmDiameter: 10 mmFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€7.90*

66271, FG Ball bearing 17x26x7, 2 pcs.

€18.60*

66286, FG Plastic mounting plate, front Off-Road Buggy 4WD,1 pce.

€3.80*

66288/01 FG Aluminum brace long Off-Road Buggy WB 535, 2 pcs.

Item N° 66288/01 Aluminium brace long Off-Road Buggy WB 535, 2 pcs.

€17.90*

66288, FG Alloy brace, long, Off-Road Buggy 4WD, 2 pcs.

285x10mm.

€17.90*

66287/02 FG Headless pin M5x45mm - 2pcs.

Headless steel pin M5x45mm

€3.90*

66285, FG Reinforcement plate, front, 4WD, 1 pce.

€15.90*

66271/06 FG ball bearing 17x26x7 sealed, 2 pcs.

Genuine FG spare/option part.

€15.50*

66285/01, FG Alloy spacer hex 10x7, 2 pcs.

€5.50*

66270/01, FG Alloy front upright (fits l/h + r/h), 2WD/4WD, 1 pce.

Genuine FG spare/option part.

€75.90*

66275/05 FG Front cardan shaft 4WD

Genuine FG spare/option part.Contents:1 piece

€65.50*

Customers also viewed

y0578, Alloy front shock tower for FG Sportsline and Off-Road 4WD, 1 pce.

Aluminum front shock tower for FG Off-Road Buggy and Sportsline 4WD, replaces stock plastic part FG #66287.Stock mounting hardware will be re-used.

€59.90*

FG Monster Truck WB535 with crystal-clear body.

The Wheelbase of the WB535 2WD version is 60 mm longer. This modification improved the directionally stability as well as further driving qualities significantly. In addition parts of the 4WD Monster models were assembled in order to make a conversion to a 4WD model possible with low efforts. According to the large tires this model can be driven almost everywhere. The 26 cm³ engine provides sufficient power. Driving fun as well as tremendous looks are the prime characteristics of these models.The body shell comes unpainted, a decal set with writings for further decoration is enclosed in the delivery.Technical description:The undercarriage of the Monster models is built on a 4 mm angled alloy plate. All borings for fixa- tion of the chassis parts at the bottom side are countersunk in order to prevent the screw heads from sticking out. At the front axle you have the possibility to adjust toe-in or toe-out as well as the wheel camber through track rods with right-hand/left-hand thread. The wheel camber of the rear wheels can be adjusted individually through adjusting screws with right-hand/left-hand thread. Four large-volume oil-pressure shock absorbers are mounted at the lower double wishbones of front and rear axle, these are able to absorb larger shocks of jumps to a great extent and care for an optimal road grip. All rotating drive components are supported by ball bearings. Highly stressed steel parts such as rear gearwheels, differential gears and drive components are hardened. Fuel tank and ra- dio control parts are protected through alloy plates at the sides. The body parts are made of coloured or respectively clear polycarbonate. The Monster tires with tire inserts are glued on chrome-plated rims.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The models are equipped with a powerful 26 cm³ combustion engine with ready-for-use oiled air fil- ter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR version is delivered with assembled and preset radio control system and rechargeable batteries. To complete the non-RTR version all popular servos and radio control sys- tems are suitable.Dimensions: Length: 780 mm Width: 510 mm Height: 350 mm Wheelbase: 353 mm

€999.95*

Configure now

Mielke 5446 Mix clutch shoes 2x aluminum / 1x carbon for Power Gearshift clutches

Clutch shoes for Mielke Power Gearshift clutches part numbers 5440, 5441 und 5442.

€44.90*

Details

66275/05 FG Front cardan shaft 4WD

Genuine FG spare/option part.Contents:1 piece

€65.50*