66260/01, FG Plastic link for stabilizer bar, short, 4/4mm twisted, for 4WD, 2 pcs.

€3.90*

Prices incl. VAT plus shipping costs

Available

Product number: fg_66260_01

EAN: 3410564530597

Product information "66260/01, FG Plastic link for stabilizer bar, short, 4/4mm twisted, for 4WD, 2 pcs."

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

8472/01 FG Flexible long bowden cable for rear disk brake - 1pce.

Cable: 350 mmSheath: 270 mmSpare part for , , , , and .

€17.50*

69241 FG Plastic servo retainer small

Genuine FG spare/option part. Dimensions:Length: 67 mmWidth: 20 mmHeight: 38.5 mmServo cutout: 42.7 x 28.7 mmContent:1 piece

€10.90*

8452/06 FG Rear tuning disk brake for 1:5 Trucks and 1:6 Off-Road

Genuine FG spare/option part. The rear disk brake is suitable for 1:5 models, Race-Trucks, the current version from Evo, 1:6 Off-Road and Monster models. The disk brakes prevent a breaking-out of the rear, have a very sensitive adjustment and are optically very effective. You can run the front disk brake with the gas servo, but make sure the servo has a minimun regulating power of six kilograms. We recommend to steer over two servos if you install front and rear disk brake. We deliver the disk brakes without uprights. In combination with the rim 6105/01 also suitable for Marder, Beetle and Pajero.Additional equipment for front and rear tuning disk brake:8472/01 Flexible bowden cables8474/05 Alloy bowden cable holder8469 Alloy guiding plate with ball bearing8479 Steel bush8448 Stud bolt for brake lining8458/02 Lasered tuning disk brake8457/03 Competition brake lining

€169.95*

1000-39 Mecatech brake pad return springs, 8 pcs.

Replacement part for Mecatech twin piston hydraulic brake.

€9.80*

1000-66 Mecatech DOT-5 brake fluid 50ml

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50ml

Content: 50 Milliliter (€218.00* / 1000 Milliliter)

€10.90*

y6107 Wheel squares 18 mm HART-COAT, 9,5 mm wide

Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)9,5 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 9,5 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€14.95*

Similar products

66254, FG Axle shaft 6x50mm 4WD, 1 pce.

€4.30*

66223, FG Plastic bearing carrier 4WD

Genuine FG spare/option part.Contents:2 pieces

€5.50*

66211 FG Gear cover 4WD

Genuine FG spare/option part. Contents:1 piece

€6.90*

66266, FG Alloy a-arm, front upper 4WD, 1 pce.

Alternative: y2002 Alloy a-arm, front upper FG 4WD - Fits FG Leopard 4WD und Sportsline onroad 4WD with 510mm wheelbase.Does not fit FG Leopard 2WD und Sportsline onroad 4WD with 530mm wheelbase.

€39.95*

66256, FG Plastic cog belt pulley front 42T. 4WD, 1pce.

€23.90*

66222, FG Axle for tensioning pulley case, 4WD, 1pce

32mmx10mm mit 4mm tread

€5.30*

66267 FG Turnbuckle M10/M8x66mm, 2WD/4WD, 2 pcs.

M8 r/h thread / M10 l/h threadFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.50*

66245 FG Steel ball 7 mm

Genuine FG spare/option part. Bore 3 mm.Contents:4 pieces

€5.30*

66210 FG Rear axle cover 4WD

Genuine FG spare/option part. Contents:1 piece

€10.95*

66250/01, FG Bracket f. stabilizer bar front 2WD/4WD, 2 pcs.

For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€3.50*

66207, FG Plastic cog belt pulley, rear 42T. 4WD

Genuine FG spare/option part.Contents:1 piece

€23.90*

66217 FG Steel pinion 14T narrow, 1pce.

Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*