The legendary 1:6 FG Marder 2WD off-road buggy with extra-wide Mammoth tyres on chrome rims !For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas.A 800 cc tank gives almost an hour of driving fun!For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun!The FG Marder is also available with completely installed remote control. Just fuel up, start the engine and drive off.You can select the car with complete RTR-equipment from the options menu.RTR-equipmentRTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed.Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-batteryFeatures:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions:Length: 690 mmWidth: 510 mmHeight: 270 mmWheelbase: 475 mm

The legendary 1/6 FG Marder 2WD Off Road Buggy! For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas. A 800 cc tank gives almost an hour of driving fun! For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun! The FG Marder is also available with completely installed remote control. Just fuel up, start the engine and drive off.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Features:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions: Length: 690 mm Width: 420 mm Height: 270 mm Wheelbase: 475 mm

The KRATON® 1/5 8S Speed Monster Truck showcases ARRMA® bashing performance at its biggest and best and in this new ready-to-run version, it's better than ever before. Loaded with EXtreme Bash parts for improved durability, plus a powerful 8S LiPo-capable Spektrum brushless system, the ARRMA® KRATON® 1/5 8S EXB Speed Monster Truck RTR is the ultimate Speed Monster Truck experience for large-scale bashers.The new Spektrum 8S-capable brushless system is more powerful than ever. It features a massive 5687 FIRMA 1100Kv brushless motor, with a huge 56mm diameter and 10% more torque than the previous KRATON® 8S RTR motor. The new motor is paired with a Spektrum S6510 steel gear servo that offers 820 oz-in of torque at 8.4V nearly 50% more torque than its predecessor. The new RTR package also includes a Spektrum FIRMA 160A V2 Smart ESC and Spektrum DX3 3-channel 2.4GHz DSMR radio system with Spektrum AVC® technology built-in to keep the huge power under control.Numerous EXB-hardened parts and options give the ready-to-run ARRMA® KRATON® 1/5 8S EXtreme Bash Speed Monster Truck virtually unstoppable strength right out of the box. They include a 5mm thick EXB 7075 T6 CNC aluminum laser-etched chassis plate; EXB red-anodized CNC aluminum front brace mount; and EXB front bumper with impact-absorbing design. Topping it off is a monster truck body finished with an aggressive new EXB color scheme for a look unlike any other vehicle. No "Candy Crush" designs here the KRATON® 1/5 8S EXtreme Bash Speed Monster Truck is built to be as purposeful as it looks!Adjustable, oil-filled, 20mm bore shocks with 6mm thick shock shafts and ultra-thick composite towers soak up bumps. The KRATON® 1/5 8S EXtreme Bash Speed Monster Truck RTR blasts over dirt, asphalt, and grass all terrain and all conditions. Beefy dBoots® COPPERHEAD 2 big block tires on multi-spoke wheels with durable hubs add all-terrain traction. Everything in the durable design contributes to confident control and responsive handling at high speeds.A center body support, aluminum center braces and composite chassis side pods add more strength. All-metal diff outdrives and gearbox internals, plus durable steel driveshafts, provide a reliable, heavy-duty drivetrain that holds up to extreme, high-speed bashing.ARRMA® keeps your maintenance downtime to the minimum with its proven efficient, easy-access modular design. Considering its performance, convenience, and value, the KRATON® 1/5 8S EXtreme Bash Speed Monster Truck is more than a massive and powerful bashing machine. It's the biggest and best ARRMA® ready-to-run basher to date! EXB (EXtreme Bash) Components)EXB-hardened components throughout its fully assembled chassis give the 1/5 scale ARRMA® KRATON® EXtreme Bash Speed Monster Truck RTR virtually unstoppable strength. Steel TurnbucklesHeavy-duty components including the 8mm thick steel rear turnbuckles and 7mm thick steel steering turnbuckles enable the 1/5 scale KRATON® EXB to withstand extreme off-road bashing. Oil-Filled ShocksMounted on ultra-thick composite front and rear towers and featuring plush shock tuning, the adjustable, oil-filled, 20mm bore shocks with 6mm thick shock shafts easily soak up bumps. High-Traction dBoots® TiresBeefy dBoots® COPPERHEAD 2 big block tires on multi-spoke wheels with durable hubs deliver all-terrain traction and add an aggressive edge to the EXB matte and gloss effect finished truck body. Quick Motor AccessARRMA® holds your maintenance downtime to the minimum with an efficient, driver-friendly design. For example, the easy-access, 3-bolt sliding motor mount allows quick motor removal. Electronics ModuleThe easy-access, molded electronics module screwed to the chassis contains a waterproof receiver box, servo mount and ESC tray ready to protect the electronics from dirt and moisture. Multi-Structured Center Brace SystemMade of rugged anodized 7075 T6 aluminum, the laser-etched 5mm chassis plate includes strong composite chassis side pods and a center body support and brace for maximum durability. Durable Metal ConstructionDurable steel driveshafts plus all-metal diff outdrives and gearbox internals keep the heavy-duty 4-wheel drivetrain rolling over punishing tracks. An EXtreme Bash toughened suspension system smooths the ride. Smart TechnologyThe included Spektrum DX3 Smart transmitter and SRS6110AT AVC® (Active Vehicle Control®) receiver let you take full advantage of the Spektrum Smart Firma brushless motor and ESC's innovative telemetry capabilities. Download the free Spektrum Dashboard App to your mobile device and follow motor RPM, ESC temperature, receiver voltage, drive pack voltage and more data in real-time. Dial-in extra stability with the radio's AVC® system to carve corners and nail jumps without letting up on the throttle. Features The ultimate ARRMA® 1/5 scale RTR Speed Monster Truck Engineered tough with EXtreme Bash 7075-T6 aluminum parts Bigger, tougher shocks, linkages, turnbuckles, and more Aggressive new EXB matte/gloss color scheme Updated, extreme 8S LiPo capable Spektrum brushless power system EXB 7075 T6 5mm thick CNC aluminum laser-etched chassis plate EXB Red-anodized CNC aluminum front brace mount Spektrum FIRMA 1100Kv brushless motor with 10% more torque Spektrum S6510 steel gear waterproof servo with 47% more torque Spektrum DX3 3-channel 2.4GHz DSMR radio Spektrum SR6200A DSMR receiver with AVC® Easy-access front and rear diff module design Updated Spektrum FIRMA 160A V2 Smart ESC with more punch and better driving feel Big Block dBoots® Copperhead 2 tires Front bumper with impact-absorbing design Easy-access 3-bolt sliding motor mount Heavy-duty drivetrain All-metal diff outdrives and gearbox internals Durable steel driveshafts Durable wheel hubs Easy-access waterproof electronics module Center body support and brace for maximum durability Strong composite chassis side pods Wheelie bar High-quality CNC machined aluminum 24mm wheel wrench included

The Basic Kit is particularly intended for persons switching and differs from the Evo 2020 by not including the following parts: Engine Tuned pipe Body shell Rear wing Wheels Innovations of the, according to the manufacturer FG, the race model EVO 2020 to be expected in September 2020 Competition-OnRoad RC car with the latest technical developments. Latest version Improved - in numerous details! Unique among the large scale models. New stabilizer bar construction front and rear. Ball stabiliszers or frame stabilizers can be used (accessories). 10 mm thick chassis made of T7075 aluminium with cut-outs for weights (also under the tank) and grooves in the front area. This allows the vehicle to be perfectly adapted to the track or the driver. The engine is now again bolted to the chassis for more stiffness. Optimally designed wishbones on front and rear suspension. Reinforced and with toe-in adjustability, which is performed via aluminum wedges. Front upper wishbone for more adjustment possibilities. All gears with fine pitch.Since 1997, i.e. since the beginning of the 1:5 RC car scene, FG Modellsport has been represented with team drivers worldwide at national and international competitions. With the Competition-EVO series, FG won most world championships and almost all European championships. Content10 mm T7075 aluminum chassis plateAir filter / AirboxFront and rear hydraulic brakesDifferentialLarge volume shock absorbers, black anodized

Competition-OnRoad RC car with the latest technical developments. Unique among the large scale models. New stabilizer bar construction front and rear. Ball stabiliszers or frame stabilizers can be used (accessories). 10 mm thick chassis made of T7075 aluminium with cut-outs for weights (also under the tank) and grooves in the front area. This allows the vehicle to be perfectly adapted to the track or the driver. The engine is now again bolted to the chassis for more stiffness. Optimally designed wishbones on front and rear suspension. Reinforced and with toe-in adjustability, which is performed via aluminum wedges. Front upper wishbone for more adjustment possibilities. All gears with fine pitch.Since 1997, i.e. since the beginning of the 1:5 RC car scene, FG Modellsport has been represented with team drivers worldwide at national and international competitions. With the Competition-EVO series, FG won most world championships and almost all European championships. Content Top suspension with 10 mm T7075 aluminum chassis plate Zenoah G230RC Engine Adjustable Tuning Clutch Air filter / Airbox Tuned pipe system Front and rear hydraulic brakes Differential Large volume shock absorbers, black anodized Wheels and rimsYou will also need: - 1:5 scale body with a 530/535 wheelbase - Complete radio control system (transmitter and receiver) - 2 throttle/brake servos and 1 steering servo - Receiver battery

Inklusive: Spektrum 780 KV Brushless Motor und Spektrum 160 Amp ESC Spektrum™ Firma® 160 Amp Brushless SMART ESCDer Regler ist wasserdicht, vollständig programmierbar und mit einem Hochstrom-IC5-Stecker versehen. Der Regler funktioniert mit den meisten brushless Motoren und ist mit LiPo und NiMH Akkus kompatibel. Die SMART-Technologie liefert Informationen wie Batteriespannung, Drehzahl, RX-Pack-Spannung und Geschwindigkeit direkt vom ESC, wenn das ESC mit der Spektrum Dashboard-App verwendet wird.  80+ KMH Spektrum Firma 4-Pol 780Kv Brushless MotorDer brushless Regler und Motor bieten unglaubliche Leistung mit einem 8S LiPo (nicht im Lieferumfang enthalten), und ermöglichen Geschwindigkeiten von über 80 KMH. Zur komplementierung des HPI Baja 5B wird noch die RTR-Austattung (Fernsteuerung, Servo), Fahrakku benötigt. Bauen Sie Ihren eigenen authentischen HPI Baja 5B Flux! wir haben auf euch gehört, der einzige originale HPI Baja 5B ist als Bausatz zurück! Diese HPI SBK-Kollektion besteht aus einem elektrisch und einem kraftstoffbetriebenen Modell. Als der HPI Baja 5B Buggy zum ersten Mal vorgestellt wurde, waren große RC-Modelle sehr teuer und für den durchschnittlichen RC-Bastler ziemlich schwierig, diese fantastische Größe zu erleben.Durch die Verwendung hochbeständiger Teile und innovativer Designmerkmale brachte HPI neuen Enthusiasten Offroad-Fahrzeuge im großen Maßstab und läutete eine neue RC-Ära ein! Jetzt können Sie diese Legende nachbauen und erleben! Erleben Sie den Nervenkitzel und die Aufregung, ein Auto zu bauen, das am Ende über 80 cm (fast 32 Zoll) lang und fast 10 kg (über 21 lb) wiegt! Wählen Sie Ihren eigenen Sender, Lenkservo, Motor, Controller und Batterien!Mit extra starken Antriebskomponenten wie dem Viskose-Drehmomentdifferential, super haltbaren Verbundzahnrädern mit interner Dämpfung und einem Vollmetall-Antriebsstrang ist das HPI Baja 5B Flux einsatzbereit. Der HPI Baja 5B SBK ist außerdem mit übergroßen und superstarken Aufhängungsteilen ausgestattet, mit großartiger HPI-Haltbarkeit! Mit seiner fachmännisch konstruierten geformten Verbundstoffaufhängung plus extra langen einstellbaren HD-Stoßdämpfern und soliden dreiteiligen Nylon-Beadlock-Rädern ist dieser Baja 5B SBK bereit für Rennen mit voller Geschwindigkeit auf jeder Offroad-Strecke! Das 4mm dicke Monocoque-Chassis aus 6061er Aluminium verleiht dem HPI Baja 5B den klassischen Look eines Wüstenrennbuggys. Präzise in Form gebogen, um maximale Festigkeit zu erreichen, bildet das Chassis die Befestigungspunkte für Motor und Aufhängung und bildet das Rückgrat des Autos. Für eine präzise Lenkung sorgt eine doppelte Zahnstange mit Ritzel und Nockenwellen-Servo-Saver. Aluminiumteile sind in kühlem Bronze eloxiert und die klassische Baja Desert Racer klare Polycarbonatkarosserie ist im HPI Baja SBK-Kit enthalten, bereit für Ihr eigenes Farbschema mit Ihrer Lexan-Farbe Ihrer Wahl Ihrer Lexan-Farbe Ihrer Wahl.RACING CHASSIS DESIGN & LAYOUTDas schmale Monocoque-Chassis aus steifem 4mm 6061er Flugzeugaluminium verleiht dem HPI Baja 5B SBK eine klassische Desert Race Buggy-Optik und extreme Steifigkeit und Langlebigkeit. Das U-förmige Chassis ist hinten mit einer dicken Kunststoff-Unterfahrschutzplatte geschützt, um Motor und Antriebsstrang zusätzlich zu schützen. Der Rohr-Überrollkäfig besteht aus schlagfestem Nylon und hat ein echtes Aluminiumdach, um den klassischen Look fortzusetzen. Der Überrollkäfig ist voll funktionsfähig und schützt Motor und Innenraum vor Crashschäden. Der Überrollkäfig, die Radiobox, die Karosserieteile, der Kotflügel, der Unterboden und das Getriebe sind alle mit Schnellzugriffsclips für eine einfache Wartung montiert.Beim Bau eines HPI SBK (Self Build Kit) haben Sie völlig freie Wahl. Zur Fertigstellung wird noch benötigt: Fernsteuerung mit Servo Fahrakkus (je 2x 3S oder 2x 4S) Ladegerät für Fahrakkus Zwei Dosen Spezifikationen: Offroad-Buggy-Bausatz im Maßstab 1:5 Bereit für Ihre 6S- oder 8S-LiPo-Elektronik Freie Wahl der Elektronik Geschlossene RC-Box Transparente Baja-Kapuze Einstellbare HD-Stoßdämpfer Monocoque-Fahrgestell Niedriger Schwerpunkt für überlegenes Handling Langer Federweg Ölgefülltes Viskose-Differential All-Terrain-Reifen Beadlock-Räder mit Metalleinsatz Hintere Stoßdämpferbrücke aus Aluminium Schutzplatten aus Hartplastik Verstellbarer Heckflügel Schneller Zugriff auf alle kritischen Wartungspunkte Doppelte Kniehebellenkung Nockenwellen-Servo-Saver Rennspezifische Innensechskant-Hardware Bronze eloxiert Kompletter Satz gummierter Kugellager Spezifikationen Chassis: Gesamtlänge: 817 mm Höhe: 255 mm Breite vorne: 460 mm Breite hinten: 480 mm Spurweite für 395 mm Spurweite hinten: 400 mm Radstand: 570 mm Reihenhöhe: 76 mm Federweg vorne: 95 mm Federweg hinten: 100 mm Gewicht: 9,6 kg Einstellbarer vorderer Sturz Sturzeinstellung für: mit Shims Sturzeinstellung hinten: mit Schraube Nachlauf für: einstellbar mit Unterlegscheibe; 22~25,5~29 Grad Fußleisteneinstellung für: mit Schraube Zehenspur hinten: fügt 0~4 Grad ein Flugzeugaluminium 6061 T6 Monocoque-Chassis Doppelquerlenkeraufhängung mit einstellbarem Rollzentrum vorne und hinten Antriebssystem: HD-Metallgetriebe mit abgedichtetem Getriebe Übersetzungsverhältnis: 8,382:1 Differential: Viskose Drehmomentsteuerung mit Silikonöl Stoßdämpfer: HD-Aluminium einstellbar Radtyp: 3-teiliges Beadlock-Design mit Metallnabe

This stadium truck is the perfect model for the entry into the RC large scale sport. The model is fully assembled and can be equipped with an RC system in our shopping cart selection. It is available with Lexan body shell. Limited Edition tune parts:2x 4492 Alu Querlenker hinten untenPreis: 55,70 EUR1x 4475/01 Rear alloy shock mountPrice: 96,10 EUR1x 6423 Gear protectorPrice: 20,70 EUR1x 6499 Alloy front shock towerPrice: 69,70 EUR4x 18001 Alloy a-armPrice: 131,60 EURBase price Stadium Truck Sportsline829,90 EURSurcharge tuning parts:373,80 EURRegular price Limited Edition:1203,70 EURThe Stadium Truck comes top equipped as standard and also offers numerous choices for additional option parts to increase driving performance.Product details:1/6 scale 2WD Stadium Truck with double wishbone independent suspension. 4 mm metal chassis plate. All holes on the underside are countersunkFuel tank and RC components are protected by the bevelled chassis>Adjustable toe-in/out on the front suspensionAdjustable camber on the rear suspension4 large-volume oil pressure shocks absorbers with adjustable spring tension for a smooth ride. The secondary spur gears, differential gears and all drive parts are case hardenedThe stadium truck comes with a powerful 26cm³ FG 260 internal combustion engine. This requires standard 2-stroke gas/oil mix available at every gas station.With a tank capacity of 0.7 litres, a driving time of approx. 40 minutes is achieved.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery DimensionsLength: 730 mmWidth: 510 mmHeight: 360 mmWheelbase: 470 mm