Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

66258/06 FG Alloy stop disk right, Leopard 4WD, adjustable

Product information "66258/06 FG Alloy stop disk right, Leopard 4WD, adjustable"

Genuine FG spare/option part.

Spare part for the Leopard 4WD 2010 version.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

2015-26 Differential oil for Active Differential yellow, 50ml

€10.90*

Average rating of 0 out of 5 stars

5476/01 Mielke HR Wheel nuts M8
Mielke wheel nuts for 8 mm axles!

€29.00*

Average rating of 0 out of 5 stars

6350/01 FG Rubber gaskets.
Genuine FG spare/option part.Suitable for FG 6350.Contents:2 pieces

€4.70*

Average rating of 0 out of 5 stars

7080/04 FG Balance spring tapered, 4 pcs.
Item N° 7080/04Balance spring tapered, 4 pcs.

€5.90*

Average rating of 0 out of 5 stars

4483/01 FG Alloy-body mount front, adjustable
Genuine FG spare/option part. Suitable for all FG touring cars and GT models. Not for Mercedes C291 and Porsche GT1.Contents:1 set

€37.90*

Average rating of 0 out of 5 stars

6501/01 FG Differential grease 50 ml
Genuine FG spare/option part. Contents:1 piece / 50 ml

Content: 50 Milliliter (€186.00* / 1000 Milliliter)

€9.30*

Similar products

Average rating of 0 out of 5 stars

66254, FG Axle shaft 6x50mm 4WD, 1 pce.

€4.30*

Average rating of 0 out of 5 stars

66223, FG Plastic bearing carrier 4WD
Genuine FG spare/option part.Contents:2 pieces

€5.50*

Average rating of 0 out of 5 stars

66211 FG Gear cover 4WD
Genuine FG spare/option part. Contents:1 piece

€6.90*

Average rating of 0 out of 5 stars

66266, FG Alloy a-arm, front upper 4WD, 1 pce.
Alternative: y2002 Alloy a-arm, front upper FG 4WD - Fits FG Leopard 4WD und Sportsline onroad 4WD with 510mm wheelbase.Does not fit FG Leopard 2WD und Sportsline onroad 4WD with 530mm wheelbase.

€39.95*

Average rating of 0 out of 5 stars

66256, FG Plastic cog belt pulley front 42T. 4WD, 1pce.

€23.90*

Average rating of 0 out of 5 stars

66222, FG Axle for tensioning pulley case, 4WD, 1pce
32mmx10mm mit 4mm tread

€5.30*

Average rating of 0 out of 5 stars

66267 FG Turnbuckle M10/M8x66mm, 2WD/4WD, 2 pcs.
M8 r/h thread / M10 l/h threadFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.50*

Average rating of 0 out of 5 stars

66245 FG Steel ball 7 mm
Genuine FG spare/option part. Bore 3 mm.Contents:4 pieces

€5.30*

Average rating of 0 out of 5 stars

66210 FG Rear axle cover 4WD
Genuine FG spare/option part. Contents:1 piece

€10.95*

Average rating of 0 out of 5 stars

66250/01, FG Bracket f. stabilizer bar front 2WD/4WD, 2 pcs.
For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€3.50*

Average rating of 0 out of 5 stars

66207, FG Plastic cog belt pulley, rear 42T. 4WD
Genuine FG spare/option part.Contents:1 piece

€23.90*

Average rating of 0 out of 5 stars

66217 FG Steel pinion 14T narrow, 1pce.
Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*

Customers also viewed

Average rating of 0 out of 5 stars

66208, FG Differential spur gear 48T. 4WD, 1pce.

€49.90*

Average rating of 0 out of 5 stars

y0693 Extreme-Duty spur gear for FG, Smartech / Carson Offroad 2WD
y0693 Teeth: 12 teeth for monster models
Genuine HT spare/option part.Extreme duty gears for largescale offroaders and monster trucks. Set of coarse pitch pinion for the layshaft and corresponding differential spur gear, especially for use in off-road and monster models. The teeth are stronger and , due to their bigger size, a little bit more forgiving when the gear mesh is not adjusted correctly.Module: m=1,75To keep the original gearing the set is available with 12 teeth pinion for Monster Truck & Co. or 13 teeth pinion for all other off-roaders with standard sized tires.The differential spur gear has 41 teeth. Please tell us your choice!Fits FG 2WD cars and Carson Attack/Firehammer/Smartech Traveller, Carson Comanche, Touareg a.s.o. The gears have diameters like standard units.Contents:2 pieces [INCLUDE]profilverschoben[ENDINCLUDE]

€79.90*

Average rating of 0 out of 5 stars

y1415 MadMax Extreme 60/80 mm rim black with 18 mm or 24 mm drive wheel drives
y1415 Version: y1415/03 One pair each for approx. 60 and 80 mm wide tires with 18 mm Square
New highly reinforced MadMax rim with 18 mm square drive and optimized orange beadlock rings.20-fold screwed very tough and suitable for all 1/6 &1/5 FG, Smartech and many more.The MadMax Extreme rims are available for either 60 or 80 mm tire width.They come with optimized inner and outer  orange beadlock rings, 40 pieces of 2.5 mm allen head screws (for 2 mm allen wrench) and reinforcement rings around the wheel hex.Our shop offers you the choice of economically priced sets of the following combinations:y1415/01 one pair for approx. 60 mm wide tiresy1415/02 one pair for approx. 80 mm wide tiresy1415/03 one pair each for approx. 60 and 80 mm wide tires

Variants from €29.90*
€51.90*

Average rating of 0 out of 5 stars

7080/04 FG Balance spring tapered, 4 pcs.
Item N° 7080/04Balance spring tapered, 4 pcs.

€5.90*

Average rating of 0 out of 5 stars

6064 FG Differential case
Genuine FG spare/option part. Stock plastic differential case. Also available in aluminum.Dimensions:Length: 70 mmDiameter: 42.5 mmFlange diameter: 65 mmBearing seats: 12 x 8 mmShaft bore: 8 mmInner dimensions: 40 x 30 mmContents:1 piece

€25.50*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development