6436 FG Rim extension white - 2pcs.

Genuine FG spare/option part. White rim, reduced backspacing for increased track width.Dimensions:Diameter: 120 mmWidth: 61 mm18 mm wheel squareContents:2 pieces

Genuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi 5ive tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.LosiDBXL rims do not fit the X-Maxx (depth of hex is too deep)!Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

Genuine FG spare/option part. Suitable for FG Truck models and 1:6 Off-Road models (Marder, Beetle and Pajero and many more).Rim with 18 mm square driveDimensions:Diameter: 120 mmWidth: 61 mmContents:2 pieces / 1 pair

Genuine Hörmann Jumbo tires, extra wide - 2 pcs. Extra wide tire which is suitable for 1/6 scale FG buggy/truck rim FG # 6105/01 in combination with extension ring FG # 6436 and tire insert FG # 6438/05!Diameter 165 mm, width 80 mm.Compounds available:- soft y0427- hard y0919Due to its extreme width and large tread depth the Jumbo tire provides very high grip and propulsion.Content of delivery: 2 pieces / 1pair

Extra wide tire that fits 1/6 scale FG buggy/truck rims with extension ring!Diameter 165 mm, width 80 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.HPI Baja 5 cars can also use these tires when equipped with special adapters.Available in three different compounds:mediumhard Prices are per pair (w/o inserts)We have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. With few exceptions, the Mammoth is usually for the rear axle only. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels with extension rings and wide tire inserts (same as for the FG wide slicks), which is a labor intensive job. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. However, the original FG-rim lasts without problems!

Through twisting of the ball-and-socket joint the camber can be modified. Suitable for the 2WD models Marder, Beetle a.s.o., can be combined with wishbone 6498/1.

New adjustable 2-jaw clutch.  - High-quality workmanship  - Pads are individually replaceable  - Individually adjustable to the conditions.  For FG, Carson, Losi models and HPI Baja 5B, except FG F1 and EVO2020.  1 piece