Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

64150/01 FG Body TR2 and TR4, Sportsline, clear

Product information "64150/01 FG Body TR2 and TR4, Sportsline, clear"

Genuine FG spare/option part.


Painting tips:

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Accessories / Spare parts

Average rating of 0 out of 5 stars

64140/01 FG Body FG TR2 and TR4, coloured
Genuine FG spare/option part.Dimensions:Width between the front wheels: approx. 225 mmWidth between the rear wheels: approx. 280 mmWidth in the middle: approx. 360 mmLength: approx. 660 mm

€177.50*

Similar products

Average rating of 0 out of 5 stars

54150/01 FG FG Monster Buggy WB 535 body shell, clear
Genuine FG spare/option part. Contents:1 piecePainting tips:

€127.95*

Average rating of 0 out of 5 stars

6155 FG Marder body shell Zenoah white
Genuine FG spare/option part. The FG Marder body shell is delivered white and without window gitter or decal set.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€99.90*

Average rating of 0 out of 5 stars

58150/02 FG Rear spoiler Monster Buggy Pro Off-Road WB535 clear
Accessories for FG 58150 body shell Beetle 4WD.Contents:1 piecePainting tips:

€31.90*

Average rating of 0 out of 5 stars

26100/01 FG Body Monster / Stadium-truck 2WD/4WD white
Genuine FG spare/option part.Spare part for FG Monster Truck and Monster / Stadium Truck 2WD/4WDScope of delivery consists of the painted body shell (front and main section). The shop menu allows you to select different decal sets, roll bar and off-road light dummies.Dimensions:Length: 660 mmWidth: 290 mmHeight: 195 mmWheelbase: 460 mmWith some modifications also suitable for Smartech / Carson Monster Truck, Pick Up Truck, Comanche, Stadium Truck as well as Monster Beetle. New mounting holes must be drilled and the bottom area of the bed must be almost completely removed to keep the roll cage of the Carson Smartech car. Contents:1 set

€172.45*

Average rating of 0 out of 5 stars

6154/01 FG Body polycarbonate Fun Cross
Genuine FG spare/option part. Body shell is delivered white and without decal set.Measures:Length: 530 mmWidth: 300 mmHeight: 190 mmContent:1 piece

€130.50*

Average rating of 0 out of 5 stars

6155/03 FG Body polycarbonate Fun Cross Sport
Genuine FG spare/option part. Measures:Length: 530 mmWidth: 300 mmHeight: 190 mmContent:1 piece

€134.95*

Average rating of 0 out of 5 stars

6154/03 FG E-Marder body shell Zenoah
Genuine FG spare/option part. FG E-Marder body shell with decals but without window gitter.Dimensions:Length: 580 mmWidth: 240 mmHeight: 205 mmContents:1 piece

€143.95*

Average rating of 0 out of 5 stars

67160/01 FG Body Leopard 2 Comp., Leo 2020 2WD/4WD, (lenght +26mm), transparent, 1 pce.
Spare part for the Leopard 2WD/4WD Competition and FG LEO 2020 2WD.Painting tips:

€139.50*

Average rating of 0 out of 5 stars

67160/05 FG Body Leopard Sportsline, ready plastered
Genuine FG spare/option part.The bodyshell is made from colored (not painted!) polycarbonate and will be delivered without rear wing.The original FG decal set is included, ready pasted!Content:1 piece

€124.95*

Average rating of 0 out of 5 stars

54160/03 FG Body Monster Buggy Off-Road WB535 painted
Genuine FG spare/option part.Contents:1 piece

€199.90*

Average rating of 0 out of 5 stars

68150/01 FG Body shell Off-Road Buggy 4WD, clear - 1 pcs.
he bodyshell is made from clear unpainted polycarbonate and it´s only for 4WD models.Length 500 mmWidth 285 mmHeight 155 mmPainting tips:

€112.40*

Average rating of 0 out of 5 stars

36110 FG Body Monster-/ Stadium-Hummer H2 4WD yellow, 1 pce.
Yellow Hummer H2 body fits for Monster / Stadium Trucks.Length 660 mmWidth 290 mmHeight 195 mmWheelbase 460 mm

€149.90*

Customers also viewed

Average rating of 0 out of 5 stars

FG TR4 Truggy 4WD HT-Edition
Ready for an extra portion driving fun? Then try the TR4 made by FG! Agressive appearance combined with the Leopard 4 chassis results in an optimal handling and stunning top speed with lots of driving fun wich will thrill you. Equipped with a 26 cm³ two-stroke gasoline engine with installed pull-start system. The TR4 is an uncomplicated complete package with well-tired racing technology.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery Technical information:Strong 26 cm³ gasoline engineMaintenance friendly chassisTwo differential gearsHardened driving partsCompletely ball-bearedLarge-volume aluminium dampersAggressive rim designGrip tires with 185 mm diameter and 95 mm widthReady to use Off-Road filterSimple handlingLow weightPure driving funHT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount smallCNC machined alloy engine mounts, direkt replacement for the stock plastic parts, heat and tweak resistant.Value: 54,90 EURDriveshaft bootsProtect ball drive as well as cardan drive against dirt. 4 pairs / 8 piecesValue: 42,90 EURAlloy spur gear carrierUse for 46T - 48 teeth spur gears.Value: 39,90 EURTotal value: 200,30 EURDimensions: Length: 760 mm Width: 520 mm Height: 320 mm Wheelbase: 534 mm

€1,279.95*

Average rating of 0 out of 5 stars

y0726 Gas-nitrided tuning clutch bell for Losi 5ive-T/2.0/B and Mini
Gas-nitrided tuning clutch bell machined from high grade steel with a hole for easy clutch adjustment. Special vents remove dirt and clutch lining debris automatically, preventing it from accumulating in the clutch bell and causing premature wear to clutch bell and linings. They aid in cooling of the clutch bell as well.The clutch bell features a significantly reinforced wearing surface and face which guarantees dimensional stability even under high loads! The shaft is a tiny bit longer than stock (about 0.2 mm) to prevent the bearings from binding.Since this clutch bell is single-piece machined from bar stock there is no weld bead on the inside of the face plate. The gained space allows now to use the adjustable GPM Big Extreme clutch.Suitable for genuine slot drive Losi pinions. Comes with bolts and spring washers included.The bolt hole is countersunk from the inside so you can also use a flat head screw from the inside and a nut on the outside if you like. Content:1 pieces

€49.90*

Average rating of 0 out of 5 stars

6160 FG New Beetle Off-Road body shell unpainted
Genuine FG spare/option part. The New Beetle Off-Road body is suitable for the Race Buggy Leopard (year 2000), not for the Off-Road Buggies Marder and Beetle.Contents:1 piece

€189.90*

Average rating of 0 out of 5 stars

64140/01 FG Body FG TR2 and TR4, coloured
Genuine FG spare/option part.Dimensions:Width between the front wheels: approx. 225 mmWidth between the rear wheels: approx. 280 mmWidth in the middle: approx. 360 mmLength: approx. 660 mm

€177.50*

Average rating of 0 out of 5 stars

y1310 Hitec HS-1005SGT/HS-1100WP small mounting set for Losi 5ive-T, 2.0, 5ive-B and Mini
Fits 5ive-T 2.0 as well!Set includes:y1307 Aluminum servo horn Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WPy1308/01 Aluminum servo mount A Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WPy1308/02 Aluminum servo mount B Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WPy1309 All steel linkage steering servo/servo saver applicationy1307 Aluminum servo horn Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP Losi 5ive-T, 5ive-B and MiniGenuine HT spare/option part.This extremely strong servo horn is specifically designed with dimensions for the installation of the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP high-performance servo in the Losi 5ive-T and Mini for steering application, but it can be used in other cars with this kind of servo.It bolts directly to the servos stock aluminum disk.The lever of this arm is longer than that of the servo saver. This gives you faster actuating speed of the steering.A linkage with a double-sided arm can only be done properly if all corresponding levers are the same length and the linkages run exactly parallel. If this is not the case, the servo and servo saver shaft will try to change the distance to each other with every steering movement . Thus, undesirable constraining forces.For this reason we decided to give preference to the single-sided arm.Scope of delivery:1 x Aluminium servo horn4 x Socket head cap screws 3 x 14 mm1 x Socket head cap screws 4 x 30 mm1 x Self-lockinghexagon nut M44 x Shim ring 3,2Contents:1 piecey1308/01 + y1308/02 Aluminum servo mounts Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP Losi 5ive-T, 5ive-B and MiniGenuine HT spare/option part.These servo mounts allow for a simple and strong mounting of the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP high power servo for steering application.The massive servo mounts bolt to the chassis using existing mounting holes. The mount for the stock servo has to be cut off the radio plate. The aluminum servo mounts feature a pair of additional mounting holes to install a stock servo should ever the need arise. The rear mount bolts to the radio plate as well, providing additional support for the plate.Scope of delivery y1308/01:1 x Mount A2 x Socket head cap screws 3 x 16 mm2 x Countersunk screw 4 x 14 mm2 x Shim ring 4,2 mmScope of delivery y1308/02:1 x Mount B1 x Socket head cap screw 3 x 25 mm1 x Socker head cap screw 3 x 16 mm2 x Countersunk screw 4x14 mm2 x Shim ring 3,2 mmContents:1 sety1309 All steel linkage for Losi 5ive-T and Mini steering servo/servo saver applicationGenuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

€139.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development