5183 FG Spoiler set Mini Cooper, transparent

€33.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_5183

EAN: 3410564534007

Product information "5183 FG Spoiler set Mini Cooper, transparent"

Genuine FG spare/option part.

Spare part for FG Mini Cooper body shell, order no. 5180.

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

8147 FG Rear wing BMW 320si WTCC, Samba MOCA and BMW M3 Superstars

Complete with mounting kit, side flaps and nuts & bolts. The rear wing comes unpainted (clear). Dimensions wing:Width: 280 mmDepth: 45 mmDimensions wing mounts:Height: 28 mmDimensions side flaps:Width: 50 mmHeight: 30 mmPainting tips:

€28.30*

y0022 HT Edge trim

Genuine HT spare/option part. Soft trim for body shell edges and cut-outs. Use speed glue for installation.Contents:1 piece / 3 metersPainting tips:

Content: 300 Zentimeter (€4.97* / 100 Zentimeter)

€14.90*

10257 FG Wind guiding plate left/right for F1 - set

Genuine FG spare/option part.Fits formula 1 cars only.

€53.99*

Mielke 6004 Carbon rear wing with angle profile

Available at last: the carbon rear wing for the Audi A4 body shell. Can be used for other body shells as well; please do your own measurements befor ordering!The set includes:1 x profiled carbon rear wing2 x brackets, l/h and r/h2 x backing plates to prevet ripping the body shell screwsWith complete l/h and r/h brackets, mounting hardware and backing plates which distribute the load over a larger area to prevent premature ripping of the mounting points.Size and weight:Total weight: 79 gramsOverall width: ca. 268 mmMounting hole bolt pattern: approx. 253 x 32 mmDepth: 60 mmContents:1 piece

€99.90*

y0673 Carbon fastening strip for FG no. 8418 - 2 pcs.

Use instead of plastic fastening strip FG # 8418/07 (for FG front bumper # 8418).Dimensions:Width: 95,7 mmHeight: 16,8 mmDistance between holes: 75 mmBore diameter: 8 mmThickness: 2 mm

€19.80*

50052400 Lightscale rear wing center part, plastic with logo, 1 pce.

240 mm wide rear wing center part, spare part for the RS-5 Formula 1 wing. The weight is the same as the RS-5 carbon wing; but the Lightscale plastic wing is significantly tougher and cheaper to replace if necessary. You need Lightscale inserts # 50053930 for installation of the carbon side flaps.

€22.90*

Details

y1074/01 Rear wing Audi A4

Genuine HT spare/option part.Rear wing for Audi A4 cars, 278 mm total width x 53 mm height. Contents:1 set

€36.90*

5164 FG Decal set Porsche 911 GT2-RS

Genuine FG spare/option part. Contents:1 piece

€49.90*

Details

4152/01 FG Audi A4 DTM flaps

Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set

€12.90*

52053930 Lightscale wing core insert

Wing core insert to connect the Lightscale wing body with side mount brackets or winglets. Set includes two inserts.

€15.90*

y1441/01 Audi RS5 DTM replacement front section

Fits y1441 Audi RS5 DTM body shell.

€39.50*

10254 FG Rear spoiler for F1

Genuine FG spare/option part. Content:1 setPainting tips:

€45.90*

Customers also viewed

7323/08 FG Complete pull start unit for CY / Zenoah / Fuelie / Losi engines

fg_7323_08 Zenoah Label: Without label

Genuine FG spare/option part. Complete starter unitPull start unit for CY / Zenoah G230/240/260/270/290/320.Contents:1 piece

€59.90*

2020-10 Mecatech Clutch blocks Alloy for Mecatech 2020 clutch

Genuine Mecatech spare/option part. Contents:1 set

€54.00*

Details

6020 FG Collet 2,1 mm

Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*

Details

6029/08 FG Ball-and-socket joint for M8

Genuine FG spare/option part. Reinforced plastic ball-and-socket joints for M8 thread rods. Replacement for the plastic ball-and-socket joints 6029/01.Fits 10 mm balls, total length 39 mm.Contents:4 pieces

€12.90*

8463/01 FG Pressure spring - 2pcs.

Length 12 mmInner diameter 3.3 mmWire diameter 0.3 mmSpare part for , , , , , , , , , , and .

€4.60*

7387 FG Rebuilt kit Zenoah G230, set

Cylinder-piston repair kit for Zenoah engine G230. Set includes the following parts:Cylinder, piston, piston ring, cylinder foot gasket, centering disks, piston pin clip.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealer

€109.65*

Mecatech FW01 Touring car, wheelbase 510 mm, Chassis Kit -- Europe- and world champion

Because of the customised and complex production of the Mecatech FW 01, the lead time is currently 20 working days!The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Chassis Kit of the FW01 is particulary intended for "switchers" and "newcomers" and differs from the Basic kit in that the brakes and shock absorbers are already included in the Chassis Kit. Here is a list of the parts that are required for completion:brakes and shocks (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73T Currently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We always supply the latest version of the Mecatech FW01Included in the chassis kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the enginenot included:- differential- Engine and linkage- body shell and spoilers- Airbox- clutch - engine- Electronics- Tires

€2,670.00*