Skip to main content
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

50607110 Lightscale Wheel square 11 mm

Product information "50607110 Lightscale Wheel square 11 mm"

Genuine Lightscale spare/option part.

Square Hub with additional steel pins to secure wheels from damage due to turning on the hub.

The Lightscale Diamond square hub is reduced to the maximum possible weight saving but serves even better lining and stiffness for the wheel and the brake disc. Furthermore the hub is slightly conical to its outside which makes mounting the tires easier especially in hectically racing situations.

The Diamond is available in 11,5, 12 mm and 14,5mm width and fit all common known brands such as FG, RS-5, H.A.R.M. or Contrast and many more as well as all kinds of cars like on road, off road or Formula 1.

Contents:
  • 2 pieces

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Similar products

Average rating of 0 out of 5 stars

y1036 HT rose joints with conical spacers
Genuine HT spare/option part. Dimensions:A = 5 mmB = 6 mmC = 8 mmD = 13 mmContents:2 pieces rose joints4 pieces conical spacers

€18.90*

Average rating of 0 out of 5 stars

y6107/02 Wheel squares 18 mm HART-COAT, 17 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)17 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 17 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€18.95*

Average rating of 0 out of 5 stars

y6107/01 Wheel squares 18 mm HART-COAT, 14 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)14 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 14 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Contents:2 pieces

€17.45*

Average rating of 0 out of 5 stars

y0324 Off-Road tuning spring Dirt-Spring M0
federn_dirt_m0 Version: y0324/05 - M05, blue
Genuine HT spare/option part. Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. All springs have an inner diameter of 21 mm.Available in several versions.For the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, blueContent:2 pieces

€17.90*

Average rating of 0 out of 5 stars

y0321 Off-Road tuning springs Dirt-Spring M
federn_dirt_m Version: y0324/03 - M03, red
Progressive tuning springs, will fit the standard red and the thick silver shocks on FG offroad cars. The rear springs will also fit Hurrax shocks. All springs have an internal diameter because of the manufacturing progress: 21 up to 21,5 mm. Available in several versions: For the front on FG 2WD buggies:y0322/01 - M1, 2,1 x 50 mm, yellowy0322/02 - M2, 2,2 x 50 mm, orangey0322/03 - M4, 2,4 x 50 mm, purpley0322/04 - M5, 2,5 x 50 mm, blueFor the rear on FG buggies, front and rear on FG monster cars and 4WD buggies:y0323/01 - M11, 2,1 x 90 mm, yellowy0323/02 - M12, 2,2 x 90 mm, orangey0323/03 - M13, 2,3 x 90 mm, redy0323/04 - M14, 2,4 x 90 mm, purpley0323/05 - M15, 2,5 x 90 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackFor the front on FG buggies:y0324/01 - M01, 2,1 x 60 mm, yellowy0324/02 - M02, 2,2 x 60 mm, orangey0324/03 - M03, 2,3 x 60 mm, redy0324/04 - M04, 2,4 x 60 mm, purpley0324/05 - M05, 2,5 x 60 mm, bluey0323/06 - M16, 2,6 x 90 mm, blackContents:2 pieces

€17.90*

Average rating of 0 out of 5 stars

y0264 C-clips with handle 4 - 6 mm
clipse_griff Size: y0264/06 - 6 mm
Genuine HT spare/option part.Quick change clips for installation and de-installation without tools, galvanic zinc plated.Spring steel, hardened and tempered to 1450 to 1600 N/mm² tensile strength.Available for 4, 5 and 6 mm shafts.Contents:10 pieces

€4.90*

Average rating of 0 out of 5 stars

6103/05 FG Alloy upright front 1:6 2WD
Genuine FG spare/option part. Suitable for all FG 2WD Off-Road models. Not suitable for Monster-Truck models.Bearing seats 22x7 mm.Contents:1 set

€109.50*

Average rating of 0 out of 5 stars

y0932 HT Alloy front uprights for FG / Smartech
Genuine FG spare/option part. Machined alloy front uprights with replaceable steering arm, accept 608 sized bearings (8 x 22 x 7 mm, stock size). Fits all FG (except 4wd models) and Carson / Smartech 2WD 1/5 and 1/6 cars.included in delivery contents:4 x M5 x mm screws8 x M3 x mm screws8 x M5 x mm washerFor installation in offroad cars you will need shorter steering rods 7028/01.Contents:2 pieces

€129.90*

Average rating of 0 out of 5 stars

y6107/07 Wheel squares 18 mm HART-COAT, 12 mm wide
Genuine HT spare/option part.Wheel squares made of high-strength aluminum, hardened, with two M6 mounting threads Suitable for most 1/6 and 1/5 rc-cars. Through the use of two 6 mm screws a significantly higher retention force is achieved. Yet it is still recommended to use medium strength thread lock (link y0114)! The hard anodizing (HART-COAT) guarantees much lower wear of the squares! Especially recommended when using wheel mounted brake discs! Four 3x16 dowel pins per square are included which prevent the squares from spinning in the rim. Press fitting them into the wheel squares is optional. The 12, 14 and 17 mm wide squares feature a groove for inserting a C-clip (link 6106/05), which acts as a guide for the brake disk. The narrow 9.5 mm wide squares dont need a clip; the close sitting rim will guide the disk. Measures18 mm square (wheel drive!)12 mm wide, 8.0 mm diameter axle boretwo M6 mounting threads The set includes 2 pieces of 12 mm wide wheel squares and 4 pieces each of M6 grub screws and 3x16 dowel pins.Content:2 pieces

€16.45*

Average rating of 0 out of 5 stars

y18005 HT-shock absorber quick mounts for Monster-Truck 2WD
Genuine HT spare/option part. Shock absorber quick mounts, for shock mounts and shock tower above. Sold in pairs. Contents:2 pieces

€19.90*

Average rating of 0 out of 5 stars

Offroad tuning spring Dirt-Spring Evo, 2 pcs.
federn_dirt_evo Version: y0337 Evo3, blue
Progressive tuning springs, suitable for FG tuning offroad shocks and CAD shocks. All springs have an inner diameter of 17 mm.Available in several versions:Suitable for CAD/medium and FG 7203 tuning shocks:Evo1, 1,6 x 56 mm, yellowEvo2, 1,7 x 56 mm, redEvo3, 1,8 x 56 mm, blueSuitable for CAD/long and FG 7204 tuning shocks:Evo11, 1,6 x 100 mm, yellowEvo12, 1,7 x 100 mm, redEvo13, 1,8 x 100 mm, blue

€17.90*

Average rating of 0 out of 5 stars

y0937 HT Replacement body for y0932
Genuine HT spare/option part.Spare part for y0932.Contents:1 piece

€37.90*

Customers also viewed

Average rating of 0 out of 5 stars

TT0989/7PX TopTuning Racing-Team Alloy transmitter case, Futaba T7PX Design
Genuine TopTuning spare/option part.Top quality lockable aluminum transmitter case in Futaba T7PX design. Case has plastic feet on bottom and back.The case lid features a lock on either side of the handle and a ribbed foam insert on the inside.Comes with 2 keys includedOuter dimensions: length approx. 320 mm Width: approx. 240 mm Height: approx. 160 mm Weight: 1.5 kgContents:1 piece

€79.90*

Average rating of 0 out of 5 stars

7206 FG Damper Evo 2020
Genuine FG spare/option part. Contents:2 pieces

€107.95*

Average rating of 0 out of 5 stars

FG Sportsline 2WD-465 Electric Porsche GT2 200 Amp
The 2WD-465 Sportsline electric model is based on a short chassis (465 mm wheelbase) with double wishbones Rear and front axles built. The vehicle is factory equipped with the 2-damper front axle.In the unpainted version Version does not include a decal sheet!Features: TT5692 Top Tuning Brushless Motor 1090 kVy1567 ZTW Beast Pro 200A regulatorThe front axle of the GT2 was widened to 384 mm. The rear axle is 395 mm wide.With 1090 KV brushless motor (item no. TT5692) and with 200A controller (item no. y1567).< /font>Chassis short 465 with double wishbones on the rear and front axle completely assembled, ball bearings, differential gear, oil pressure shock absorber, multi-part unpainted polycarbonate body (item no. 05160L), white spoke rims, tires and tire inserts. The model is also available in our shop selection including complete RTR equipment! RTR features RTR = Ready to Run. The RTR version is delivered ready to drive and with the 2.4 GHz remote control installed. Transmitter: Reflex Wheel Pro III 2.4 GHz Receiver: Mini BECy1570 CYS S0650 large model servo, 40 kg/0 .11 secTransmitter batteries 4 pieces y0660/04 Paint: selectableDecor set: selectable (included in the painted version)

From €1,399.90*

Average rating of 0 out of 5 stars

9541 FG Hydraulic brake for front axle
Genuine FG spare/option part. Content:1 set

€384.95*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development