Genuine FG spare/option part. Suitable for all FG touring cars with short or medium wheel base.Dimensions:Total length: 225 mmMounting bolt distance: 190 - 210 mmContents:1 piece
Genuine FG spare/option part. Suitable for all FG touring car und Race-Truck models with long wheel base.Dimensions:Total length: 255 mmMounting bolt distance: 220 - 240 mmContent:1 piece
Genuine FG spare/option part. Suitable for touring cars with short wheel base and Zenoah/CY engines. With 2 mm thick and 290 mm in lengthContents:1 piece
Genuine FG spare/option part. Contains the advertising labels for original design.The decal set contains no headlights, rear lights etc.Please order separately.Dimensions:350 x 340 mmContents:1 piece This decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.
Genuine FG spare/option part.Stock tuning pipe for all 1/5 scale cars and Trucks models with engine in horizontal position. Now in noise-limited three-chamber version.Contents:1 piece
Genuine FG spare/option part. Contains the advertising labels for original design.The decal set contains no headlights, rear lights etc. Please order separately.Dimensions:490 x 400 mmContents:1 piece
Item N° 08383 Fuel tank 800ml with quick acting closure, 1 pce.800 ml fuel tank with snap closure, ventilating valve, fuel filter and fuel hoses.Dimensions:Lenght: 130 mmWidth: 100 mmHeight: 100 mmVolume: 800 ml
Genuine HT spare/option part. Round aluminum radio plate posts, diameter 8 mm, threaded for M4 mounting bolts. Your choice of 38 mm (firs rc-plate from Evo 04 and Evo 08), 47 mm or 57 mm length.The thread bore of the 30 mm version is countersunk on one end.Contents:2 pieces
After the successful introduction of the 4WD Sportsline chassis for 1:5 FG Touring and Sports cars this chassis is now available also for Race Trucks. Mainly rookies benefit from the advantages of an all-wheel drive. Traction also on dusty asphalt, therefore no pulling of the rear section, all around just pure driving fun. These are just some advantages of the four-wheel drive.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The body shell is clear.The Race Truck chassis is equipped with a double wishbone suspension, toe-in, camber and castor can be adjusted. The robust all-wheel drive gives the vehicle a neutral driving performance on almost every surface. We set big value on durability using strong materials as well as operator convenience. The FG Sportsline class is the affordable, but still high-quality entry into the RC car sport.Technical description:Equipped with a powerful 26 cm³ engine, Tuning pipe, tank with snap closure, 2 differential gears, front disk brake and a lot more. Highlight however remains the approved FG all-wheel drive. Maximal traction as well as simple handling, grip in curves - these are the advantages only a four-wheel drive can offer. With a wheelbase from 530 mm.Dimensions:Length: 880 mmWidth: 435 mmHeight: 380 mmWheelbase: 530 mm Trucks in action!
This drift car is based on the 4WD Sportsline chassis and is equipped as follows:Aluminum engine mount, aluminum spur gear carrier, low gear ratio, universal drive shafts, stiffer shocks and special slick tires.The high-quality polycarbonate body is a faithful replica of the BMW M3 E30.Option parts included:Large and small engine mount 66215 - 6485/01Front universal drive shafts 68415Aluminum spur gear carrier 7439Steel hub for brake disk 06042/05You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The RTR version of the car includes servos, transmitter, receiver, rechargeable batteries for transmitter / receiver.The 4WD Sportsline chassis opens up a new era within the Touring and Sportscar class of large scale model cars. Main target was the development of a chassis with supreme driving dynamics and ultimate performance. Maximum traction as well as easy handling, sufficient grip in curves, only a fourwheel powered model offers all these advantages. With the new 4WD Sportsline series FG Modellsport once again sets a trend at 1:5 scale.The 4WD Sportsline chassis is delivered with a wheelbase of 510mm. The fourwheel drive is carried out over an almost wear resistant tooth belt. 2 differential gears, tank with snap closure and a powerful engine with Tuning pipe turn the Sportsline 4WD chassis into a high-class 1:5 scale model with outstanding driving characteristics.You can choose this 4WD model with 2.4 GHz radio control system, servos, batteries in our configurator.The engine runs with a 2-stroke petrol-oil mixture. Through the installed pull-start system the engine can be started without any problems. A tank filling enables you to run your model around 45 minutes. Equipment and technical description of the 4WD Sportsline Mini Cooper:Solid 4mm chassis made of high-quality aluminium low-wear belt drive splash-proved 2 differential gears double wishbones at front and rear axle toe-in, castor and wheel camber adjustable at the axles - rear FG ball drive all steel driving components hardened all rotating parts ball-beared servo relieving servo saver front disk brake rear gear brake with big brake disk 700ccm fuel tank with snap closure oil-pressure shock absorbers with volume control and spring adjusting ring 26 cm³ combustion engine with Tuning pipe fabric hollow chamber tires with inserts receiver box and battery holder optional painted polycarbonate bodyshell with decals and with the RTR version the 2.4 GHz pistol grip radio control system with steering and gas servoDimensions:Length: 830 mmWidth: 405 mmHeight: 260 mmWheelbase: 510 mmWeight: 10,2 kgPainting tips: