500405469 Carson Rear hub carrier

Genuine HT spare/option part. Steering centerlink, very strong, does not bend.The stock high socket ball / M3 bolt will be replaced with a standard unit / M4 bolt without the unnecessary leverage.Standard plastic bushings and a spacer (used as an axle) replace the expensive proprietary bolts and bushings from the stock part. Rebuilding the bearings becomes cheap and easy with this centerlink.All parts included.Contents:1 piece

Genuine Carson spare/option part. Contents:2 pieces

Genuine Carson spare/option part. The Carson Expert Charger LiPo Compact 3A is a balancing quick charger for 2-, 3- and 4-cell LiPo batteries. Thanks to its excellent price/performance ratio it is ideal for beginners and on the road as a second mobile device. Four LEDs indicate operating and charging status.Technical details: Quick Charger For all 7.4 / 11.1 and 14.8 V LiPo batteries (2S / 3S / 4S) Gentle loading due to the balancer function Charge current 3000 mA Balancer connector system XHPContents:1 piece

Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey and Super Rock Rey.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: The adapters only fit in combination with the standard plastic steering knuckles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which then prevents the drive pin from being fitted.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fender wells will need some cutting.Please note: the wide rear wheels from MadMax or HPI do not fit!This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm

Fits on Carson models. Not for Gas Devil.