32754/02 Replace pike to C5 Multiple chamber tuned pipe exhaust

€49.90*

Prices incl. VAT plus shipping costs

Available

Product number: cs_32754_02

EAN: 4058575054962

Product information "32754/02 Replace pike to C5 Multiple chamber tuned pipe exhaust"

Replacement part, fits Complete 1/5 on-road tuned pipe system C5.

Tuned pipe dimensions:

total length: approx. 310 mm li>
maximum diameter: 50 mm
inlet elbow angle: 180 °
tailpipe length: 22 mm
tailpipe diameter: 16 mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Customers also viewed

8466/01 Stainless steel wheel shafts for FG 2WD, 62.5 mm

The wheel shaft is made from stainless steel and precision ground. This insures a perfect fit and prevents corrosion.A special nut with a serrated locking flange will keep the wheel in place. The flanged button head screw replaces the usual E-clipDirect replacement for FG 8466.Contents:2x Wheel shafts2x Nuts2x Screws

€12.90*

905046 Carson tuned pipe for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan - set

Item N° 905046 Carson tuned pipe for Carson Gas Devil + CRT 4x4, Conrad Hell Devil, Smartech Titan - setLow mounting alloy pipe, installs between the wheels. Comes complete with manifold and mounting hardware.When installing this pipe on a Thunderbolt some minor modifications to the body shell are necessary to clear the manifold.

€129.90*

67405 FG Tuning pipe for Leopard 2020 2WD

Genuine FG spare/option part. Contents:1 set

€329.50*

y1011 Zenoah G270RC with Walbro carburetor WT 990

26 cm³ Zenoah engine for large scale cars!Please note: contrary to their new designation the displacement has not been increased! The outer dimension didn't change, so you don't need any additional parts for the engine swap!The engines feature the following improvements over their G260RC:Quantity of cylinder mounting bolts increased from 2 to 4Improved strength of crankcaseAdded additional bearing on the PTO (clutch) side of crankshaftRedesigned shape of cylinder finsDimension of air intake port is 5% widerNew carburetor (WT-990) Contains internal fuel pump which increases acceleration from idle to wide open throttle.Removal of choke valve increases performance by increasing air flow to the carburetor Changed material of the insulator gasket to metal, which improves sealing performanceThe engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€284.90*

32457 Spacer - 3pcs.

€6.90*

y19031/01 Silicone exhaust hose extrem reinforced 22/30 mm

Genuine HT spare/option part. Very strong, multiple glas fiber layers, nevertheless very stretchable. Resist maximum temperatures up to 250°C (482°F) from.Needs hose clamps with at least 35 mm inner diameter! Maße:Inside diameter: 22 mm Outside diameter: 30 mmWall thickness: 4 mmLength: 50 mmContents:1 piece

€9.90*