EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm
Go to homepage
Quick shipping until 14 o'clock
PartScout
€0.00*
Quick shipping until 14 o'clock

500405212 Carson Wheel mount

Skip image gallery

€17.99*

Prices incl. VAT plus shipping costs

Available

Product number: cs_500405212
EAN: 4058575107316

Product information "500405212 Carson Wheel mount"

Genuine Carson spare/option part.

Contents:
  • 2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Alternatives

TT1050 Wheel adapter 24 mm hex for Carson Dirt Attack
TT1050 Wheel adapter 24 mm hex for Carson Dirt Attack
24 mm hex wheel adapter for installation of most all common large scale rims with corresponding socket (MadMax/Losi/HPI etc.) on Carson Dirt Attack cars. This allows the use of a variety of different tires for better adaptation to the surface. For installation the stock square drive is swapped for the hex version which is secured by an M6 set screw. The rims are then secured with the 24 mm wrench size nuts of the adapter.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004 ATOP Aluminum closed wheel nuts Losi 5ive-T/2.0/B, Mini, DBXL/2.0 and MTXL 22,90 EUR), which are also offered in our shop's option menu! Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of Allen Grub screw2 pieces of shim

€22.90*

Customers also bought

y1563 Wheel nuts for Dirt Attack
y1563 Wheel nuts for Dirt Attack
Genuine rc-car-online spare/option part. Contents:4 pieces

€5.90*

Similar products

TT1050 Wheel adapter 24 mm hex for Carson Dirt Attack
TT1050 Wheel adapter 24 mm hex for Carson Dirt Attack
24 mm hex wheel adapter for installation of most all common large scale rims with corresponding socket (MadMax/Losi/HPI etc.) on Carson Dirt Attack cars. This allows the use of a variety of different tires for better adaptation to the surface. For installation the stock square drive is swapped for the hex version which is secured by an M6 set screw. The rims are then secured with the 24 mm wrench size nuts of the adapter.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004 ATOP Aluminum closed wheel nuts Losi 5ive-T/2.0/B, Mini, DBXL/2.0 and MTXL 22,90 EUR), which are also offered in our shop's option menu! Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of Allen Grub screw2 pieces of shim

€22.90*
C6015 Carson Dirt Attack Servo
C6015 Carson Dirt Attack Servo
Genuine Carson spare/option part. Water protectedAluminum heat sinkSpeed: 0.12 / 60° @ 6VTorque @ 6V: 135 NcmJR connector4.8 to 6VContents:1 piece

€35.99*
500405205 Carson Front shocks
500405205 Carson Front shocks
Genuine Carson spare/option part. Contents:2 pieces

€69.95*
Details
500405206 Carson Rear shocks
500405206 Carson Rear shocks
Genuine Carson spare/option part. Contents:2 pieces

€59.95*
050024 Carson Fuelie standart clutch complete set
050024 Carson Fuelie standart clutch complete set
Genuine Carson spare/option part. Fits all Zenoah and Chung Yang engines.Contents:1 set

€29.90*
500305237 Carson Roll cage plastic for Dirt Attack GP
500305237 Carson Roll cage plastic for Dirt Attack GP
Genuine FG spare/option part. Contents:1 set

€34.99*
500405210 Carson Dog bone rear
500405210 Carson Dog bone rear
Genuine Carson spare/option part. Contents:2 pieces

€39.95*
500405209 Carson Gear housing
500405209 Carson Gear housing
Genuine Carson spare/option part. Contents:1 piece

€37.99*
050025 Carson Coupling flange for Dirt Attack GP 2.0
050025 Carson Coupling flange for Dirt Attack GP 2.0
Genuine Carson spare/option part.Required to install engines in the Carson Dirt Attack GP 2.0.Content:1 piece

€24.90*
500305233 Carson Diff gear steel 30 Teeth for Dirt Attack GP
500305233 Carson Diff gear steel 30 Teeth for Dirt Attack GP
Genuine FG spare/option part. Contents:1 piece

€39.95*
500405207 Carson Steering linkage
500405207 Carson Steering linkage
Genuine Carson spare/option part. Contents:2 pieces

€16.99*
500305234 Diff drive pinion 10 teeth
500305234 Diff drive pinion 10 teeth
Genuine Carson spare/option part. Contents:1 piece

€29.99*

Customers also viewed

500405216 Carson Rear wheel axle
500405216 Carson Rear wheel axle
Genuine Carson spare/option part. Contents:2 pieces

€39.99*
TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters
Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€37.90*
500405466 Carson Gear differential (center)
500405466 Carson Gear differential (center)
Genuine Carson spare/option part. Fits CY-Eline models.Contents:1 piece

€89.90*
32462 Wheel drives steel - 18 mm square - 9,5 mm wide - 2pcs.
32462 Wheel drives steel - 18 mm square - 9,5 mm wide - 2pcs.
Item N° 32462 Wheel drives steel - 18 mm square - 9,5 mm wide - 2pcs.18 mm square steel wheel drives, 9,5 mm wide, 0.5 mm land for running against the the wheel bearing's inner race.Two threads for M5 grub screws with 90° offset, 8 mm bore diameter for wheel shaft.Black-finished surface.

€19.39*
Details
500405211 Carson Ball bearing 19x10x5 mm
500405211 Carson Ball bearing 19x10x5 mm
Genuine Carson spare/option part. Dimensions:19x10x5 mmContents:4 pieces

€24.95*
y1413/02 MadMax OVER LANDER one pair rear tires 80 mm
y1413/02 MadMax OVER LANDER one pair rear tires 80 mm
Genuine MadMax spare/option part.Losi and HPI foam tire inserts from can be used.The OVER LANDER MadMax are designed as all-terrain tires that can be used on virtually all surfaces because of its tightly attached lug tread pattern When a terrain includes sand, gravel and grass, the OVER LANDER is the right choice! It can even be used on partially paved tracks! Dimensions:Outer diameter: 170 mmTyre width: 80 mmContents:2 pieces / 1 pair Some off-road tires knowledge can be found here!

€29.90*
TT1051 Top Tuning Conversion kit for the standard 1:/5 18 mm square wheel drives for the Carson CY-Eline cars
TT1051 Top Tuning Conversion kit for the standard 1:/5 18 mm square wheel drives for the Carson CY-Eline cars
Genuine Top Tuning spare/option part. Conversion kit for the standard 1:/5 18 mm square wheel drives for the Carson CY-Eline carsThis allows for the use of all 1/5 on-road wheels e.g. by or . The cars become approx. 5 mm wider per side. This i feasibles with all usual body shells of the CY-E-line cars. Set includes:4 pieces # y6107 hard coated 18 mm aluminum square drives, 9.5 mm wide, with 8 mm axle bore, threaded for 2 x M6 grub screws4 pieces M6 grub screws8 pieces 3x16 mm steel pins4 pieces # 6038 mounting washers 6x15 mm 4 pieces M5x16 mm countersunk screws

€39.90*
This website uses cookies to ensure the best experience possible. More information.... By clicking on "[Agree / Accept all / etc.]" you also give your consent to the disclosure of your behavior in our store to our partner, shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany), which cannot assign this data to you personally, but may process it for its own purposes (e.g. product improvements, market behavior analyses).
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Agency