Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

2012-272 Mecatech Carbon fieber support for fuel recovery

Product information "2012-272 Mecatech Carbon fieber support for fuel recovery"

Genuine Mecatech spare/option part for the FW01.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Average rating of 0 out of 5 stars

2012-205 Mecatech Special brake disk
Genuine Mecatech spare/option part for the FW01.Suitable for the special carrier: 2012-202, 2012-203, 2012-204.Content:2 pieces

€28.20*

Average rating of 0 out of 5 stars

2012-63 Mecatech Steearing Rod Long
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€14.70*

Average rating of 0 out of 5 stars

2012-233 Mecatech Carbon fieber front Mount plate 2017
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€26.10*

Average rating of 0 out of 5 stars

2012-127 Mecatech Bush for rear Wheel toe in 4,5°
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

Average rating of 0 out of 5 stars

2012-13 Mecatech Carbon Fiber front Body Support
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€24.90*

Similar products

Average rating of 0 out of 5 stars

y1218 Springs for drive shafts
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece

€4.90*

Average rating of 0 out of 5 stars

y1004 Driveshaft boots for ball drive + dogbones
Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces

€8.90*

Average rating of 0 out of 5 stars

2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution
2012/502 Brake linkage set dedicated to Mecatech FW01 and FG Evolution.Content:1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages 1 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/5101 x Screw M3 x 18 mm2 x Nut M3

€17.90*

Average rating of 0 out of 5 stars

2012/504 Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution
Throttle/brake servo horn dedicated to Mecatech FW01 and FG Evolution.Suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!Content:1 x y0700 Double sided alloy servo horn1 x y0700/01 Single-sided alloy servo horn2 x 1018/05 Spacer bushing 5 x 20 mm for throttle linkage Evo 08/510 (one spacer drilled to 3 mm inner diameter)1 x M3 x 30 mm Screw2 x M3 x 12 mm Nut

€27.90*

Average rating of 0 out of 5 stars

2012/501 Throttle linkage dedicated to Mecatech FW01 and FG Evolution
Throttle linkage dedicated to Mecatech FW01 and FG Evolution.Set includes:1 x 1018/01 Throttle linkage Evo 09 / Comp. 071 x 6534/02 Throttle pivot post for 2 mm linkages1 x Screw M3 x 20 mm2 x Nut M3

€16.90*

Average rating of 0 out of 5 stars

2012-289 Mecatech Right left threaded rod 45 mm
Genuine Mecatech spare/option part. Contents:1 piece

€12.15*

Average rating of 0 out of 5 stars

2012/503 Steering servo linkage set dedicated to Mecatech FW01
Steering servo linkage set dedicated to Mecatech FW01Content:1213/11 Steering linkage l./r., M4 x 42 mm1 x 66244, Ball joint 7mm M4, 2 pcs.1 x 1213/10 Steel ball 7 x 6,5 mm, 2 St.2 x Screw M3 x 16 mm2 x Nut M3

€24.90*

Average rating of 0 out of 5 stars

2012/500 Linkage set dedicated to Mecatech FW01, complete
Complete set for steering, throttle and brake linkagesSet includes:3 x 6534/02 Throttle pivot post for 2 mm linkages 1 x y0132 y0132 Linkage rod for MecaTech brakes1 x 1213/10 Steel ball 7 x 6,5 mm1 x 66244, Ball joint 7mm M41 x 1213/11 Steering linkage l./r., M4 x 42mm1 x 6020 Set collar 2,1mm1 x 1018/01 Throttle linkage Evo 09 / Comp. 077 x Nut M32 x Screw M3 x 16 mm3 x Screw M3 x 18 mm 2012/501 Throttle linkage 2012/502 Brake linkage set 2012/503 Steering servo linkage set 2012/504 Throttle/brake servo horn The Servo arm is suitable for all servos with an output shaft with 25T spline shaft, for example:y2006 Digital Big-Scale Servo D-21HVNearly all Robbe/Futaba servosMega Power servoThunder Tiger DS1015Savöx servosand many more!

€79.90*

Average rating of 0 out of 5 stars

2012-270 Mecatech Side stiffener to allow the front lower engine mount
Genuine Mecatech spare/option part. Spare part for Mecatech 2012-265.Contents:1 piece

€54.00*

Average rating of 0 out of 5 stars

2012-275 Mecatech Bodyshell support suitable for Samba 7 and 8
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€29.50*

Average rating of 0 out of 5 stars

2012-274 Mecatech Car Bag
Genuine Mecatech spare/option part. Very tough car bag with hardcase shape. All side panels are reinforced with a solid plastic tub.Dimensions:Length: 93 cmHeight: 30 cmWidth: 45 cmContents:1 piece

€139.00*

Average rating of 0 out of 5 stars

2012-276 Mecatech Accessories bag
Genuine Mecatech spare/option part. Dimensions:Length: 66 cmHeight: 35 cmWidth: 35 cmContents:1 piece

€99.50*

Customers also viewed

Average rating of 0 out of 5 stars

2012-101 Mecatech Bell Clutch
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€50.00*

Average rating of 0 out of 5 stars

5800 Mielke quick fill fuel cap system for FG/ Mecatech tank
Genuine Mielke spare/option part. The quick fill fuel tank cap has a threaded shank to screw it into the filler neck. An O-ring seals the connection. The cap can be turned into the desired position and will be locked there by screws.Fits FG and Mecatech tanks.Contents:1 piece

€54.50*

Average rating of 0 out of 5 stars

1000-15 Mecatech Brake lever guide block
Genuine Mecatech spare/option part.Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece

€16.50*

Average rating of 0 out of 5 stars

Mecatech FW01 Touring car, wheelbase 530 mm, Performance Kit -- Europe- and world champion
The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Performance Kit from the FW01 is particularly intended for "racer" and differs from the Chassis Kit model by the Performance Kit. Here the list of parts are not including:DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlPerformance Kit :engine brace left and rightfront stabilizer bar 2.75 mm titanium ready for installationrear stabilizer bar 1.75 mm titanium ready for installationthe two 80 gram front weightsthe two smaller 80 gram center weightsWith the Performance Kit the vehicle is quasi equipped as used at races!Stock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us! The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01. The following components are not included in the Performance Kit not and can be selected individually through the choice of options: engine, clutch, exhaust and airbox, differential gear, body shell and wheels. Not included are all relevant components for remote control! included in the kit:clutch bellbell pinionshaft and screw for clutch installationdifferential spur gearnot included:differentialbody shellairboxrear wingengineelectronicstiresclutch We are currently waiting for the latest version of the Mecatech FW01.

€2,999.00*

Average rating of 0 out of 5 stars

5170/05 FG Body set Porsche GT3 RSR 2,0 mm unpainted 2WD/4WD
Genuine FG spare/option part.The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The thickness of the body shell is 2.0 mm and fits for Sportsline models. The body shell is vac-formed from 2 mm Lexan.The set is delivered unpainted.Frontteil: 5172 FG Porsche GT3 RSR body, front sectionHeckspoiler: 5173 FG Spoiler set Porsche GT3 RSR transparentRequired body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 890 mmWidth: 405 mmHeight: 240 mmWheelbase: 510 mmPainting tips:

€209.95*

Average rating of 0 out of 5 stars

y3016 Hoonigan start numbers decal set
y3016 Elasto film: Original film
Genuine HT spare/option part. Universal decals suitable for all body shells. The decals are printed on clear film and have to be cut out by yourself.Size (Height x Width):Complete sheet: 285 mm x 390 mm3 x Number frame: 105 x 90 mm3 x Numbers from 1 to 0: 50 mm (different widths)This decal set is also available in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention:Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Contents:1 piece

€11.90*
Loading...
Upload in progress, please be patient ...
Shopware-Theme Development Shopware-Plugin Development