2012-107 Mecatech Gearwells Retaining Ring

€2.60*

Prices incl. VAT plus shipping costs

Available

Product number: mec_2012_107

EAN: 4058575030522

Product information "2012-107 Mecatech Gearwells Retaining Ring"

Genuine Mecatech spare/option part for the FW01.

Content:

4 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

2012-106 Mecatech Aluminium Washer for Engine Fastening

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.30*

2012-108 Mecatech Zahnrad Z64

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€61.00*

Details

2012-105 Mecatech Countersunk Screw M5x12

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-122 Mecatech Rear Driving Axle

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€23.00*

Details

2012-123 Mecatech Bush for rear Wheel Toe in 1° -3°

Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

Details

2012-112 Mecatech Pinion Z24

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

Details

2012-104 Mecatech Countersunk Screw M5x14

Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

2012-124 Mecatech Bush for rear Wheel toe in 1,5° -2,5°

Genuine Mecatech spare/option part for the FW01.Contents:4 pieces

€29.50*

GPM 6079/01 Ball drive wheel shaft for all FG and Mecatech cars, 1 pce.

Fits all FG cars and the Mecatech FW01. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Diameter: 8 mmTotal length 76.6 mm

From €32.90*

Details

2012-116 Mecatech Rear Upper Whisbone

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€29.60*

2012-117 Mecatech Rear Upright LH

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€67.00*

Details

2012-115 Mecatech Rear upper Wishbone Shaft

Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€7.70*

Details

Customers also viewed

7303 Samba 7 Titan Racing tuned pipe system ESW DMC 50-1101

The Samba 7 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 7 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springsDespite of the increased performance fuel consumption remains the same compared to a Samba 6 pipe. The Samba 7 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! New New connection from exhaust to manifold Lower center of gravity through new alignment Also suitable for 510 wheelbaseSamba 7 can also be installed in cars equipped with Magura 2 hydraulic brakes (see pictures).Of course, the Samba 7 tuned pipe system is race legal for racing, with the DMC approval number 50-1101 engraved. The Samba 7 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as well<Will fit medium (510 mm) wheelbase cars from FG as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development"

€399.00*

Details

2012-108 Mecatech Zahnrad Z64

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€61.00*

Details

NEW PMT BigScale Slick tires, Q5 medium, for the Race Car Series

The new slick tyre from PMT. Allowed in the Race Car Series! Novelty! Combines performance and durability. The perfect tyre for long turns and fast lap times.Dimension:Outside diameter: approx. 116 mmWidth: approx. 65 mmRims: 18 mm square driveContents:2 piece

€38.90*

y1483 Walbro WT-1048 Racing carburetor

y1483 Version: y1483/01 WT-1048 Racing carburetor

Genuine Walbro spare/option part.Popular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.Contents:1 piece

€97.90*

8180 FG Body set BMW M3 ALMS, clear 2 mm for 530/535 mm wheelbase

The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan.The set is delivered not painted. Required body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mmPainting tips:

€219.95*

y0113/01 Thread locking compound,medium

kleb_0005 Strength: y0113/01 Medium

Genuine HT spare/option part.Available as 272 high strength and heat resistant, 270/1 high strength or 241 medium strength.The strength of 272 and 270/1 is comparable, but 272 can handle temperatures up to 230°C vs. 150°C for 270/1. It is therefore the perfect choice for applications like exhaust or clutch pinion bolts. However, curing of 272 takes at least twice as long as 270/1.An excellent recommendation for removal of screws treated with threadlocking compound:CFH Diamant M50 Gasbrenner, y1007 Contents:1 piece / 10 gram

Content: 20 Gramm (€395.00* / 1000 Gramm)

€7.90*

2012-98 Mecatech Pinion Z37

Genuine Mecatech spare/option part for the FW01.Content:1 piece

€33.00*

Details