Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218
Genuine HT spare/option part. The best solution for drive shaft positioning, can be used with ball drives or regular "dog bones" as well.The springs will be simply inserted into the drive cups.DImensions:Diameter: 11 mmHeight: 8 mmContents:4 piece
Genuine HT spare/option part. Protect ball drive as well as cardan drive against dirt. For FG and Carson ball drives, fits standard dogbones as well.Contents:2 pieces
FG Set price: 130,20 EURFits all FG touring cars, GT-models and Mecatech FW01.The ball drive conversion kit for FG marder, Off-Road Buggy, beetle, monster / stadium, formula 1 and truck models you will find under GPM 9472. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins.The GPM ball drive set includes everything for a conversion of the respective FG/Mecatech cars. Set includes:Quantity:DescriptionPart number2 piecesBall drive wheel shaftGPM 6079/012 piecesDifferential ball drive cupGPM 6069/022 piecesBall drive shaft 91 mmGPM 7081/014 piecesDrive shaft booty100412 piecesSteel ballGPM 7080/024 piecesDrive shaft spacer springy1218
Genuine FG spare/option part.The Off-Road Buggy models get a lot more grip and drive stability mounting the new Off-Road M tires. The narrow Off-Road tires M can be used for the front and for the rear axle.Dimensions:Diameter: 180 mmWidth: 60 mmContents:2 piece
Awarded the spiel gut® seal of approval for particularly good and long-lasting toys.With the Neo Fighter, TAMIYA presents the successor to the absolute bestseller among the 2WD RC buggies, the legendary Super Fighter G. This new entry-level racer offers optimal conditions for driving fun on any terrain. The model is particularly impressive in terms of quality and robustness, as it is also the standard model for the TAMIYA FIGHTER-CUP, the world's largest RC youth racing series.The 1:10 scale Neo Fighter, which weighs just over 1 kg, has become slightly longer at a good 40 cm and, thanks to the now larger wheelbase, offers even more directional stability when driving quickly. Its narrow, almost tubular DT-03 chassis contains well-protected electronics and mechanics. Independent suspension, differential, oil-filled shock absorbers and the flexible polycarbon body, which incorporates design elements from classic models, are standard. The highlight is the sensitively controllable electronic speed controller.Required accessories:PS paint, batteries and charger, RC system with servo2WD kit model, DT-03 chassis, electronic speed controller, 540 torque-tuned motor, polycarbonate body, oil pressure damper, rear pin-spike tires, front grooved tires, independent wheel suspension front/rear, rear axle with differential, instructions. Technical details: Impact-resistant tub frame chassis DT-03 Front impact protection Double wishbones Independent front and rear suspension Oil pressure shock absorbers 2WD rear wheel drive Differential gear Polycarbonate body Electric motor type 540 Torque Tuned electronic speed controller Pin spike tires at the rear Grooved tires at the frontTechnical data: Scale 1:10 Length 400 mm Width 248 mm Height 132 mm Wheelbase 287 mm Track v/h: 221/208 mm Wheel dimension WxØ: v 27x80 h 41x86 mm Warnings:Before you begin assembly, you should read and understand all instructions. If a child is assembling the model, a supervising adult should also read the assembly instructions.Tools including knives are used when assembling the kit. Special caution is required to avoid injury.If difficulties arise during assembly, ask an adult to supervise the work or a model maker with RC experience or a specialist dealer.Only use tools for their intended purpose. There is a risk of injury if used incorrectly.If you use paints and/or glue (not included in the kit), note and follow the instructions provided there.Keep the kit away from small children. Prevent children from putting any components in their mouths or putting plastic bags over their heads.
Extra wide tire that fits 1/6 scale FG buggy/truck rims with extension ring!Diameter 165 mm, width 80 mm. Fits all FG and Carson largescale cars, may fit other cars with 18 mm wheel squares as well.HPI Baja 5 cars can also use these tires when equipped with special adapters.Available in three different compounds:mediumhard Prices are per pair (w/o inserts)We have tried various rubber / tire compounds for several months on various forms of terrain, etc.. The Mammoth brings, due to its quite strong and large pins and the extreme width of the tire, especially on hard and low grip surfaces a high traction! The Mammoth is available in soft, medium and hard! The rule is: the harder the ground the softer the tire compound. Where other tires spin helplessly the Mammoth provides serious traction. With few exceptions, the Mammoth is usually for the rear axle only. The disadvantage of Mammoth tires: Because of their extreme width they need to be mounted on FG wheels with extension rings and wide tire inserts (same as for the FG wide slicks), which is a labor intensive job. The white lettering on the tires has been applied for presentation purpose only. The tires will be delivered with black sidewall. From experience, we must strongly recommend against using rims from another manufacturer in combination with extension rings. Due to the before mentioned traction no other rim has been up to the task! Broken rims and torn squares were the result. However, the original FG-rim lasts without problems!