Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

2012-154 Mecatech Pinion Z 25

Product information "2012-154 Mecatech Pinion Z 25"

Genuine Mecatech spare/option part for the FW01.

Content:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

1000-34/DOT4/DOT5 Mecatech seal
Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Compatible with the DOT4/DOT5brake fluid.Contents:1 piece

€5.50*

Average rating of 0 out of 5 stars

2012-112 Mecatech Pinion Z24
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

Average rating of 0 out of 5 stars

2012-107 Mecatech Gearwells Retaining Ring
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€2.60*

Average rating of 0 out of 5 stars

1000-36/DOT4/DOT5 Mecatech o-ring
Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Compatible with the DOT-4 brake fluid.Contents:4 pieces

€6.00*

Average rating of 0 out of 5 stars

2012-105 Mecatech Countersunk Screw M5x12
Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

Average rating of 0 out of 5 stars

2012-106 Mecatech Aluminium Washer for Engine Fastening
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€8.30*

Similar products

Average rating of 0 out of 5 stars

2012-177 Mecatech steering limiter
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€11.40*

Average rating of 0 out of 5 stars

2012-172 Mecatech Retaining Brake line
Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€6.00*

Average rating of 0 out of 5 stars

2012-175 Diff.ball bearing
Genuine Mecatech spare/option part for the FW01.Differential ball bearing, sealed on both sides.Content:1 piece

€9.75*

Average rating of 0 out of 5 stars

2012-163 Mecatech Drive shaft rubber pads
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€7.50*

Average rating of 0 out of 5 stars

2012-166 Mecatech Carbon fiber pipe Support
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€26.00*

Average rating of 0 out of 5 stars

2012-155 Mecatech Protective Bellow
Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€18.00*

Average rating of 0 out of 5 stars

2012-170 Mecatech Servo Saver Spherical joint long
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€9.20*

Average rating of 0 out of 5 stars

2012-179 Mecatech Upright Kinping -3 mm LH

€56.50*

Average rating of 0 out of 5 stars

2012-153 Mecatech Differential Gearwell Z 73
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€54.00*

Average rating of 0 out of 5 stars

2012-149 Mecatech Countersunk Screws M5x18
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€3.80*

Average rating of 0 out of 5 stars

2012-175/02LL Differential low-friction ball bearing 15/24/5, set of 2
Genuine Mecatech spare/option part for the FW01.Low-friction Differential ball bearing ABEC-7, sealed on both sidesContent:2 pieces

€15.90*

Average rating of 0 out of 5 stars

2012-178 Mecatech Upright Kinping -3 mm RH

€56.50*

Customers also viewed

Average rating of 0 out of 5 stars

8300 Samba 8 Titan Racing - tuned pipe system DMC 10-1504
The Samba 8 titanium gives you a weight saving of 140 grams compared to the steel version. We have tested and optimized the Samba 8 Titan- tuned pipe system for half a year on the engine dyno and an additional three months on various racetracks! The pipe has a new, very strong connection system. This low-maintenance flexible connection between pipe and manifold is secured by four (!) springs, making a failure prone o-ring seal obsolete! Despite of the increased performance fuel consumption remains the same compared to a Samba 7 pipe. The Samba 8 system provides significantly better performance, i.e. the power is optimally available across the engines entire rpm range! Again and again, podium places are achieved at major events through the use of Samba tuned pipe systems.Of course, the Samba 8 tuned pipe system is race legal for racing, with the DMC approval number 10-1504 engraved. The Samba 8 - tuned pipe system comes with an installation kit.Fits: All On-road cars from FGContrastBergonzoniHarmGeniusand many others as wellOriginal statement from Samba: "This new tuned pipe system is the result of the development of the Samba 7 tuned pipe!"

€399.00*

Average rating of 0 out of 5 stars

2012-112 Mecatech Pinion Z24
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

Average rating of 0 out of 5 stars

2012-109 Mecatech Main Shaft
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€49.90*

Average rating of 0 out of 5 stars

Mecatech FW01 Touring car, wheelbase 510 mm, Performance Kit -- Europe- and world champion
Because of the customised and complex production of the Mecatech FW 01, the lead time is currently 20 working days!The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Performance Kit from the FW01 is particularly intended for "racer" and differs from the Chassis Kit model by the Performance Kit. Here the list of parts are not including:DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlPerformance Kit:engine brace left and rightfront stabilizer bar 2.75 mm titanium ready for installationrear stabilizer bar 1.75 mm titanium ready for installationthe two 80 gram front weightsthe two smaller 80 gram center weightsWith the Performance Kit the vehicle is quasi equipped as used at races!Stock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us! The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01. We are currently waiting for the latest version of the Mecatech FW01.Included in the chassis kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the enginenot included:- differential- Engine and linkage- body shell and spoilers- Airbox- clutch - engine- Electronics- TiresWe are currently waiting for the latest version of the Mecatech FW01.

€2,999.00*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Agency