Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

2012-153 Mecatech Differential Gearwell Z 73

Product information "2012-153 Mecatech Differential Gearwell Z 73"

Genuine Mecatech spare/option part for the FW01.

Content:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

1000-04 Mecatech dust seal, 2 pcs.
Replacement part for Mecatech twin piston hydraulic brake.

€4.90*

Average rating of 0 out of 5 stars

1000-63 Mecatech conversion kit for using DOT4/DOT5 brake fluid
Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Set with pistons and gaskets/seals, allows for the use of DOT4/DOT5 brake fluid.Contents:1 set

€111.00*

Average rating of 0 out of 5 stars

1000-07 Mecatech dowel pin, 4 pcs.
Replacement part for Mecatech twin piston hydraulic brake.

€3.60*

Average rating of 0 out of 5 stars

2012-209 Mecatech Spherical Joint holediameter 3 mm
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€10.10*

Average rating of 0 out of 5 stars

2012-97 Mecatech Pinion Z36
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€33.00*

Average rating of 0 out of 5 stars

2012-112 Mecatech Pinion Z24
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

Similar products

Average rating of 0 out of 5 stars

2012-177 Mecatech steering limiter
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€11.40*

Average rating of 0 out of 5 stars

2012-172 Mecatech Retaining Brake line
Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€6.00*

Average rating of 0 out of 5 stars

2012-175 Diff.ball bearing
Genuine Mecatech spare/option part for the FW01.Differential ball bearing, sealed on both sides.Content:1 piece

€9.75*

Average rating of 0 out of 5 stars

2012-163 Mecatech Drive shaft rubber pads
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€7.50*

Average rating of 0 out of 5 stars

2012-166 Mecatech Carbon fiber pipe Support
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€26.00*

Average rating of 0 out of 5 stars

2012-155 Mecatech Protective Bellow
Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€18.00*

Average rating of 0 out of 5 stars

2012-170 Mecatech Servo Saver Spherical joint long
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€9.20*

Average rating of 0 out of 5 stars

2012-154 Mecatech Pinion Z 25
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.70*

Average rating of 0 out of 5 stars

2012-179 Mecatech Upright Kinping -3 mm LH

€56.50*

Average rating of 0 out of 5 stars

2012-149 Mecatech Countersunk Screws M5x18
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€3.80*

Average rating of 0 out of 5 stars

2012-175/02LL Differential low-friction ball bearing 15/24/5, set of 2
Genuine Mecatech spare/option part for the FW01.Low-friction Differential ball bearing ABEC-7, sealed on both sidesContent:2 pieces

€15.90*

Average rating of 0 out of 5 stars

2012-178 Mecatech Upright Kinping -3 mm RH

€56.50*

Customers also viewed

Average rating of 0 out of 5 stars

Mecatech FW01 Touring car, wheelbase 530 mm, Basic Kit -- Europe- and world champion
Because of the customised and complex production of the Mecatech FW 01, the lead time is currently 20 working days!The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Basic Kit of the FW01 is especially intended for "switchers" and differs from the chassis kit in terms of the brakes and shock absorbers (included in the chassis kit). Here is a list of the parts that are required for completion:brakes, shocks and springs (Difference to Chassis Kit)DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlStock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us!The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01.Included in the basic kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the engineDoes not include- Brakes, shocks and springs- differential- clutch- body and spoilers- Airbox- Engine and linkage- Electronics- Tires

€1,862.00*

Average rating of 0 out of 5 stars

2015-Light Mecatech Active Differential for 1/5 scale cars
Genuine Mecatech spare/option part.New design for the Active Diff! It is lighter, smaller and it haven´t the adjustment screw. The inner parts are the same of the standard version.Heavy-duty, torque dependent self-locking differential with various possibilities for adjustment.The use of four satellite gears distributes the load on four ramps, increasing their service life compared to already existing solutions. Needle bearings on the back of the satellite gears ensure smooth operation of the ramp system.For adaption to the grip conditions you can choose from two different pairs of steel and carbon friction disks and ramp bells. The latter have 3 different ramp angles per pair of bells. All versions are included.Differential spur gear and ball bearings are vehicle-dependent and therefore not included.Content:1 x complete Mecatech Active Diff assembled with bell B for high grip2 x bell A for low grip4 x Carbon discs outer diameter 30 mm4 x Steel discs inner diameter 24 mm1 x Bottle of diff oil

€449.90*

Average rating of 0 out of 5 stars

Mecatech FW01 Touring car, wheelbase 510 mm, Performance Kit -- Europe- and world champion
Because of the customised and complex production of the Mecatech FW 01, the lead time is currently 14 working days!The Mecatech FW01 is for sure the currently most innovative 1/5 race car designed for the dedicated and technically enthusiastic rc car driver.Everyone is enthusiastic about the perfectly fitting and precise workmanship at the highest level. Only high quality materials are used for the production.Since many years Mecatech is a well-know premium manufacturer of largescale hydraulic brakes or shocks and, as only a few may know, a technology expert for a number of Formula 1 racing teams!The Performance Kit from the FW01 is particularly intended for "racer" and differs from the Chassis Kit model by the Performance Kit. Here the list of parts are not including:DifferentialEngine Clutch, Airbox and tuned pipe systembody shell and tiresElectonic components such as servos, batteries and Remote controlPerformance Kit:engine brace left and rightfront stabilizer bar 2.75 mm titanium ready for installationrear stabilizer bar 1.75 mm titanium ready for installationthe two 80 gram front weightsthe two smaller 80 gram center weightsWith the Performance Kit the vehicle is quasi equipped as used at races!Stock gearing:Clutch pinion / spur gear: 36T / 64TLayshaft pinion / differential: 24T / 73TCurrently the Mecatech FW01 is for sure the benchmark of the 1/5 scale racing scene! In the first year Markus Feldmann won with his FW01 1: 5 Mecatech on one of the world's finest and most demanding race track in Lostallo / SwitzerlandMecatech is multiple German, European and World Champion with the FW01 and as the last result:Markus Feldman wins the European Championship in Tourlaville/France. All top 5 positions went to drivers running a Mecatech FW01. 7 out of 10 finalists cars were Mecatech FW01.Although the fit of the Mecatech FW01 parts makes the assembly of the car a great experience, some of our customers want to use the expertise of our shop and wish their FW01 fully assembled and tuned in by us! The complete assembly of your FW01 by our workshop is possible for an additional charge. Please note that the costs of the full assembly with servos a.s.o. do not include the price of any rc-components. If you do not have a suitable radio system with servos and batteries as well as switch and charger, you have to take an additional EUR 800 to EUR 1,500 for this equipment into account. We will be happy to make you an appropriate offer. We are currently waiting for the latest version of the Mecatech FW01. We are currently waiting for the latest version of the Mecatech FW01.Included in the chassis kit:- All pinions- clutch bell- Coupling fixation- All parts and screws for mounting the enginenot included:- differential- Engine and linkage- body shell and spoilers- Airbox- clutch - engine- Electronics- TiresWe are currently waiting for the latest version of the Mecatech FW01.

€2,999.00*

Average rating of 0 out of 5 stars

5800 Mielke quick fill fuel cap system for FG/ Mecatech tank
Genuine Mielke spare/option part. The quick fill fuel tank cap has a threaded shank to screw it into the filler neck. An O-ring seals the connection. The cap can be turned into the desired position and will be locked there by screws.Fits FG and Mecatech tanks.Contents:1 piece

€54.50*

Average rating of 0 out of 5 stars

Carburetor Walbro WT 997 with choke normal/ball-raced
y1069 Walbro WT997 carburetor with chokeThe WT997 is certainly one of the most popular carburetors from the big Walbro program because its unproblematic to adjust. For this reason it is especially recommended for the less experienced rc-car driver.The carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The Walbro WT997 features an integrated choke with lever and a throttle shaft linkage lever.The WT997 is also available with ball-raced throttle shaft under part number # y0036/05 Ball-raced tuning carburetor Walbro WT997 with choke.y0036/05 Ball-raced tuning carburetor Walbro WT997 with chokeWith dual ball bearings on the throttle shaft. Two sealed bearings 2RS type (3/16" x 5/16" x 1/8") shielded by two steel plates (5 x 8 x 0.3 mm). High quality processed and optimized for racing use! The soft stock screw holding the throttle lever has been replaced with a high strength Allen key screw. Since all screws on the carb are imperial sized, so is the key for this screw. A corresponding bit is included in our tool set y0785, or you can use Allen key wrench y0037/03 as well.The WT997 is certainly one of the most popular carburetors from the big Walbro program because its unproblematic to adjust. For this reason it is especially recommended for the less experienced rc-car driver.The carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The modified Walbro WT997 features an integrated choke with lever and a double ball-raced throttle shaft with linkage lever.The Walbro WT997 carburetor is also available in a standard version under part number # y1069 Walbro WT997carburetor with choke. Fits all Zenoah G230/240/260/270/290/320 engines as well as the respective Chung-Yang (CY) versions, also Losi and HPI Fuelie, Smartech, Carson PT engines, and many others.Normal:Ball-raced:

€69.90*

Average rating of 0 out of 5 stars

TT1030/01 TopTuning Tool Tray for CAR-STAND
Tool and screw tray with quick-mount clamp, fits tubes with a diameter from 32 to 35 mm. Thus perfectly suitable for the TopTuning Car Stand TT1030 and for many other holders.Due to a strong design with high quality materials, a very high load capacity is achieved. Many possibilities to store tools and small parts to have them handy at any time when working with the Car Stand. The adjustable clamp allows the mounting of more than one Tool Tray. Contents: with foldable Tool Tray with milled adapter block with mounting clamp

From €59.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Plugin Development