Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

2012-143 Mecatech Rear Shocks Mount Pin

Product information "2012-143 Mecatech Rear Shocks Mount Pin"

Genuine Mecatech spare/option part for the FW01.

Content:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

2009-12 Mecatech Klick-Shock plastic bushing
Genuine Mecatech spare/option part.Contents:4 piece

€7.25*

Average rating of 0 out of 5 stars

y2012-93/03LL Mecatech low-friction Bearing 10x19x5, set of 3
Genuine HT spare/option part for the FW01.Low-friction Clutch bearing ABEC-7, sealed on both sides.Content:3 pieces

€21.50*

Average rating of 0 out of 5 stars

y2012-93/03 Mecatech Bearing 10x19x5, set of 3
Genuine HT spare/option part for the FW01.Clutch bearing, sealed on both sides.Content:3 pieces

€17.90*

Average rating of 0 out of 5 stars

y2012-58/04LL Mecatech low-friction Flanged Bearing for Antiroll-Bar front and rear 8/12/3,5, set of 4
Genuine HT spare/option part for the FW01.Low-friction Flanged bearing for antiroll-bar front and rear ABEC-7, sealed on both sides.Content:4 pieces

€21.90*

Average rating of 0 out of 5 stars

2012-112 Mecatech Pinion Z24
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€41.80*

Average rating of 0 out of 5 stars

GPM 7080/02 Balls for ball driveshaft for FG and Mecatech, 5 mm, 6 pcs.
Replacement balls for ball driveshaft.

€4.50*

Similar products

Average rating of 0 out of 5 stars

2012-148 Mecatech Rear Body Mounting
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€9.20*

Average rating of 0 out of 5 stars

2012-144 Mecatech Retainer Ring for Shocks
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€3.80*

Average rating of 0 out of 5 stars

2012-133 Mecatech Balls for Drive Shaft
Genuine Mecatech spare/option part for the FW01.Content:6 pieces

€5.50*

Average rating of 0 out of 5 stars

2012-128 Mecatech Bush for rear Wheel toe in 4°
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

Average rating of 0 out of 5 stars

2012-127 Mecatech Bush for rear Wheel toe in 4,5°
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

Average rating of 0 out of 5 stars

2012-132 Mecatech Drive Shaft
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

Average rating of 0 out of 5 stars

2012-129 Mecatech Rear Lower Upright Shaft
Genuine Mecatech spare/option part for the FW01.Content:2 pieces

€7.70*

Average rating of 0 out of 5 stars

2012-147 Mecatech Carbon Rear Body Support
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€20.90*

Average rating of 0 out of 5 stars

2012-131 Mecatech Rear lower Wishbone RH
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€62.50*

Average rating of 0 out of 5 stars

2012-126 Mecatech Bush for rear Wheel toe in 3,5° -0,5°
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€29.50*

Average rating of 0 out of 5 stars

2012-140 Mecatech Countersunk Screws M4x14
Genuine Mecatech spare/option part for the FW01.Content:8 pieces

€3.80*

Average rating of 0 out of 5 stars

2012-135 Mecatech Antiroll Bar Pivot Diameter 5 mm
Genuine Mecatech spare/option part for the FW01.Contents:1 piece

€7.50*

Customers also viewed

Average rating of 0 out of 5 stars

2012-206 Mecatech Steel ball 3mm
Genuine Mecatech spare/option part.Contents:1 piece

€7.50*

Average rating of 0 out of 5 stars

2015-Light Mecatech Active Differential for 1/5 scale cars
Genuine Mecatech spare/option part.New design for the Active Diff! It is lighter, smaller and it haven´t the adjustment screw. The inner parts are the same of the standard version.Heavy-duty, torque dependent self-locking differential with various possibilities for adjustment.The use of four satellite gears distributes the load on four ramps, increasing their service life compared to already existing solutions. Needle bearings on the back of the satellite gears ensure smooth operation of the ramp system.For adaption to the grip conditions you can choose from two different pairs of steel and carbon friction disks and ramp bells. The latter have 3 different ramp angles per pair of bells. All versions are included.Differential spur gear and ball bearings are vehicle-dependent and therefore not included.Content:1 x complete Mecatech Active Diff assembled with bell B for high grip2 x bell A for low grip4 x Carbon discs outer diameter 30 mm4 x Steel discs inner diameter 24 mm1 x Bottle of diff oil

€449.90*

Average rating of 0 out of 5 stars

2012-236 Mecatech Alloy plastic spacer for connection triangle 2017
Genuine Mecatech spare/option part for the FW01.Contents:1 set

€7.50*

Average rating of 0 out of 5 stars

2012-09 Mecatech Front Bumper Foam
Genuine Mecatech spare/option part for the FW01.Content:1 piece

€17.50*

Average rating of 0 out of 5 stars

TT0900 Top Tuning electric starter 2.0 for most 1/5 and 1/6 cars
The new TT0900 electric starter is pre-assembled and fits a wide range of models including the Losi 5ive-T, 5ive Mini and DBXL, most FG models, HPI-Baja / Wild Attack series etc. The TT0900 electric starter can be started with the remote control (free channel required!). The new TT0900electric starter has much more power than the previous Electric starter thanks to the brushless motor and higher voltage. The popular Zenoah G320 is no longer a problem. It also no longer uses a one-way bearing, which clearly increases reliability. Also the installation space has been noticeably reduced by the motor and a planetary gearbox.The starter components to be fitted weigh about 666 grams plus the battery.For mounting the starter, the flywheel on the engine is replaced by the version with spring-loaded pawls included in the delivery. The tools required for this, piston stopper and flywheel puller, are also included in the delivery.For the 3rd channel the transmitter should have a switch with two positions (momentary switch preferred) or a controller. An additional channel is required for a remote engine killswitch. A killswitch is included in the scope of delivery, but a real fail-safe module such as TT0990 offers higher safety. A possibly already existing failsafe module can also be used.Due to the splitting of the functions engine start and engine stop on two channels, no more compatibility problems with different remote controls are to be expected, only the availability of free channels matters.A 3S LiPo battery is required as the power source.In the shops options menu, we offer a special battery with a more compact design (5,600 mAh/30C, 110 x 49 x 34 mm) which makes installation usually easier in many cars, as well as a battery with standard dimensions (3,900 mAh/60C, 135 x 45 x 25 mm). Of course, other 3S batteries can also be used at your own discretion, but the load capacity (capacity x C-rate) should be on a similar or higher level.Please note that we cannot ship batteries to countries outside the European Union!Since the starter unit can be mounted vertically or horizontally and the brushless starter motor is very small, almost all air filters and most tuned pipe systems can be used.Notes regarding necessary modifications known to us for mounting the starter depending on the vehicle: FG 4wd onroad Rear r/h plastic body mount, depending on position, slightly modified or relocated FG 2wd onroad horizontal engine No modifications Mecatech FW01 No modifications FG 4wd Buggy sportsline Depending on the body shell, minor trimming is required. FG 2wd Buggy current chassis Depending on the body shell, minor trimming is required. FG 2wd Marder (old chassis) Starter fits without modifications to the chassis plate. However, the body shell has to be cut out a bit more seriously in the area of the starter. A repositioning of the rear r/h body mount is recommended. FG Monster Cut the r/h side panel slightly and add a flat area to the aluminum tube which supports the panel on the engine Losi 5ive-B Depending on the tuned pipe, mount starter with motor on top or on the l/h side. Losi 5ive-B Mount the starter motor on the l/h side, space for the tuned pipe is very tight and must be tested in each individual case. No problems when using the stock muffler box. Losi DBXL Depending on the tuned pipe, mount starter with motor on top or on the l/h side. If the starter motor is to be mounted on the side, one screw of the motor roll cage must be replaced by a CSH screw. Carson C5 Only with Zenoah or CY engine, not with Smartech PT engine (different hole pattern on engine)! Carson C6 With the C6, depending on the body shell, trimming is required. HPI 5B/T Depending on the body shell, minor trimming is required. Carson Wild GP Attack Depending on the body shell, minor trimming is required. The accommodation of the engine killswitch, controller unit and wiring harness must be carried out at your own discretion. User Manual FG 4WD On-Road FG Monster FG 2WD On-Road horizontal engine FG 2WD/4WD Buggy current chassis Losi 5ive-T Losi DBXL FG 2WD Marder (old chassis)

€349.90*

Average rating of 0 out of 5 stars

2012-144 Mecatech Retainer Ring for Shocks
Genuine Mecatech spare/option part for the FW01.Content:4 pieces

€3.80*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development