2009-39 MecaTech Big Bore Shock housing

Genuine ATOP spare/option part. CNC-machined 6061-T6 aluminum rear chassis brace 1 + 2 for Losi DBXL-E 2.0.Compared to the stock plastic part (from set # LOS251100) the higher strength of the aluminum part noticeably increases the chassis rigidity.Contents:1 set

Genuine Mecatech spare/option part for the FW01.Content:1 piece

Spare part for Mecatech order no.: 2011 Mecatech Big Bore Shocks, 2 pcs.

Special offer price !  Including Mecatech Expert hydraulic brake on the front axle.  Numerous aluminium parts such as front and rear bearings, damper linkage, engine mount, wishbone ends. Uniball steel ball joints, which allow all possible adjustments of the front and rear axle, gear drive, which ensures high reliability and optimum function.  Like all FG Competition models, the Formula Competition from FG is the most successful model of recent years. The experience gained from the competitions has been incorporated into the latest version. With FG gear drive, which is extremely smooth-running and provides more power reserves. With this version, FG Modellsport has certainly created a competition-ready model for the years to come that will seamlessly build on past successes. Highlights Aluminium wishbones FG Gear drive Aluminium rear axle plate FG Adjustable aluminium shock absorbers Aluminium servo saver with ball bearings 26 cc Zenoah engine Airbox Resonance pipe system Mecha. rear disc brakes 5 mm chassis Lexan bodyworkAnother improvement is the hydraulic disc brake in the front wheels.Technical description of the FG Formula 1 Competition kit.  The chassis of the FG Formula 1 Competition is built on a 5mm aluminium chassis and all screws at the bottom of the chassis are countersunk.  The front and rear axle carriers as well as the engine unit are connected to each other over the entire length of the chassis, so that almost the rigidity of a monocoque chassis is achieved. The engine is fixed in place using a quick-release fastener, making it possible to change the engine quickly. The rear axle is driven by several smooth-running spur gears and an FG ball drive on the rear axle. The clutch bell is held by a separate flange bearing to reduce the load on the crankshaft. The front and rear axle with versatile adjustment options such as camber, caster, etc. consists of aluminium wishbones at the bottom. Sturdy aluminium rear axle plates reduce wear on the rear axle and provide enormous driving stability. Four oil-pressure shock absorbers, which are actuated via a push-rod suspension, and stabilisers ensure optimum ground contact.The model is powered by a powerful 26 cc engine with airbox and resonance silencer.The chassis is supplied with tuning bowden cable brakes for the rear axles.Equipment of the FG Formula 1 Competition kit 5 mm aluminium chassis, 26 cm³ engine, intake noise filter, tuning resonance silencer, FG gear drive, ball drive, complete rear axle and front axle carrier unit with integrated quick engine mounting, double aluminium wishbone mountings, aluminium triangular wishbones at the bottom of the rear axle and front axle, front and rear aluminium steering knuckles, ball bearing servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes at the front and rear. Servo saver, steering stops, pushrods, 4 oil pressure shock absorbers with aluminium shock absorber pistons or mechanical tuning brakes front and rear, anti-roll bar for front and rear axle, 10 mm aluminium balls, polycarbonate body, polyamide front spoiler, receiver box, competition tyres with tyre inserts.  The models are supplied as a kit with assembly instructions. The body parts are made of crystal-clear polycarbonate for self-painting. FG stickers and lettering are included.  To complete the models, you will also need: 1 remote control system (transmitter, receiver), 1 large servo for the steering (approx. 40 - 50 kg), 2 servos for throttle/brake (approx. 20 - 30 kg), batteries and charger. These parts are not included and must be ordered or delivered separately if installation is required!IncludetZenoah 26cc engineClear bodyshell and polycarbonate spoilerMechanical brakes rearHydr. brakes frontDimensionsLength: 960mmWidth: 440mmHeight: 230mmWheelbase: 620mmFormular 1 models in action!Drive:2WDMotorization:GasRTR:Without RTRScale:1/5

Genuine HT spare/option part. One each r/h and l/h adapter plate for installation of Mecatech twin-piston brake calipers on FG 2020 car uprights/spindles.Fits front and rear!Contents:1 x r/h adapter plate1 x l/h adapter plate4 x csh screw M3 x 10 mm