1083 FG Front axle shock mount for Evo 06 - 14

€74.95*

Prices incl. VAT plus shipping costs

Available

Product number: fg_1083

EAN: 3410564500484

Product information "1083 FG Front axle shock mount for Evo 06 - 14"

Genuine FG spare/option part.

New flat carbon front connecting plate for Evo 06-14.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

1018/01 FG Tuning Throttle linkage

Genuine FG spare/option part. Tuning rods with flexible ball head for the screw on the engine.Fits on all FG models with lying engine.Contents:1 piece

€9.90*

1018/05 FG Spacer bushing 5 x 20 mm for raising throttle linkage

Original Losi Ersatz-/Tuningteil.Spare parts for Evo Porsche to get there without any problems with the linkage on the fuel tank. But also a very useful distance bolts of it is because the gas / brake / hydraulic linkage to the servo to insert later. Therefore will make the bending of the linkage in most superfluous.The recommended screw us with the part number 6724/12 available as a link in the lower part of the page for accessories.Contents:1 piece

€4.30*

1074/01 FG Guide bush without collar

Genuine FG spare/option part. Is needed for 1074. Dimensions:6 x 8 x 10 mmContents:4 pieces

€3.70*

1080/01 FG Insert nuts for 1080

Genuine FG spare/option part. Are needed for the installation of the CFK chassis reinforcement (1080).For every bar are needed four nuts.Contents:4 pieces

€15.90*

Details

1075 FG Rear alum. damper plate EVO/Competition

Genuine FG spare/option part.The damper plate 2011 received further adjustment borings for the shock absorbers. According to a modified set-up the shock absorbers can be mounted much flatter in combination with the rear alum. damper mount. The model therefore has much more cornering grip.Suitable for the Competition 07-510 and 07-530 models as well as for the Competition EVO 08-510 and EVO 08-530 models.Contents:1 piece

€44.50*

1078/01 FG Alloy upright extension for Evo 04 - 14

Genuine FG spare/option part. Suitable for all FG models with original FG alloy uprights (6477). Not suitable for F1 models. Contents:1 piece

€23.90*

1039 FG Alloy gear plate Evo 04 - 08

Genuine FG spare/option part.Only suitable for alloy gear flange-engine mount 1040/05.See below for layshaft 10x19x7 mm and clutch bell 10x22x6 mm bearings.Content:1 pieces

€49.95*

1074/10 FG Conversion kit Rear upper wishbone for Evo 04 - 14

Genuine FG spare/option part. for FG Evo 04 - 14 models.Suitable for the 1:5 FG EVO and Competition models. Replaces the alum. wishbone and rear upper wishbone pin.Contents:1 set

€19.70*

1072/03 FG Rear alum. damper mount 2011 for Evo 04 - 14

Genuine FG spare/option part.The mounting of the rear damper mounts allow a higher pitch of the rear shock absorber.The model therefore has more stability in curves. Suitable for the FG Competition / EVO 04- 14 models.Contents:2 pieces

€47.50*

Details

1038 FG Rear bowden cable holder Evo 04 - 08

Genuine FG spare/option part. Is sheeted in the Evo 04 / 08 in connection with the mechanical disk brake.Only suitable for Evo 04-08 gear plate 1039Content:1 pieces

€29.90*

1063/02 FG Spacer bushing, rear axle brace Evo truck 04 - 08

Genuine FG spare/option part. When installing the higher Truck rear axle riser plates, these spacer are needed to compensate for the increased height difference between engine mounts (1063/01 and 1040/05) and rear axle brace 1063.Small spacer: 8 mm hex, 9.1 mm height, 4 mm bore.Large spacer: 10 mm hex, 9.1 mm height, 5 mm bore.You'll need a longer screw (M4x20) for installation of the r/h engine bracket 1063/01.Fits for Evo 04 - 08. Contents:2 pieces

€4.90*

1072/05 FG Rear lower alloy wishbone left Evo 04-08

Genuine FG spare/option part. Only suitable fort he Evo 04-08.With the new designed rear axle wishbones it is possible to change the caster without affecting the wheel base or the camber.Contents:1 piece

€63.95*

Customers also viewed

1212 FG Servo saver 2010 complete for Evo 08-14

Genuine FG spare/option part. Excellent and over a long term constantly operating servo saver. Adjustable hardness through change of pressure spring. Suitable for the FG EVO and Competition models with a wheelbase of 510 and 530mm in combination with the CFRP rc-plates 2010-510 and 2010-530.Contents:1 set

€74.99*

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set

Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all accessories (see also our pictures) required for installation.One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline Also suitable for electric models, but in conjunction with aluminum axle y0932 Bleeding instructionsDimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €169.90* €219.90* (22.74% saved)

Details

Mielke 5201/01 airbox/air filter upgrade kit, 1 pce.

This upgrade kit is for all those who already have an appropriate venturi adapter. If you're looking for a complete airbox set we recommend Mielke airbox/air filter set #5201.Set including airbox with reuseable foam filter element, o-rings, filter oil and hardware.New version with o-ring "locks" for better sealing and easier assembly.Only for use with the blue Mielke Airbox or identically constructed units!

€49.90*

6041/05 FG Competition layshaft, hardened

Genuine FG spare/option part. Competition gear shaft, hardened and ground.Suitable for all FG models except Formel 1 and FG 4WD.Dimensions:Length: 103 mmDiameter: 10 mmContents:1 piece

€54.50*

68420/06 FG Alum. servo saver 80°, 1:5 4WD, complete

Genuine FG spare/option part. In details improved aluminium servo saver. Improvement through modification of the slant to 80° for the protective function. According to the regulating power and the number of steering servos the red and blue FG servo saver springs can be assembled. Only suitable for 4WD 1/5 scale.Contents:1 piece

€58.50*