1071/02 FG Ball socket 4 mm for Evo

€15.90*

Available

Product number: fg_1071_02

EAN: 3410564500316

Product information "1071/02 FG Ball socket 4 mm for Evo"

Genuine FG spare/option part.

4 mm ball cup for the rear ball stabilizer 1071. Standard equipment on Evo 04 - 08 and Evo 2020 rear axle.
Fits a-arms with 5 mm slot only!

Maße:

Bore diameter to accept 11.5 mm ball
Total length 100 mm

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Accessories / Spare parts

1071/03 FG Clamping bolt rear 4 mm for Evo 04 - 12

Genuine FG spare/option part. 4 mm locking bolt for the rear ball stabilizer 1071. Thread size M5 x 18 mm.Contents:2 pieces

€17.50*

y19120 Drive shaft boots

Reduce the wastage at the drive shafts. Price per pair.

€6.90*

y0809 Klüber high performance grease for differentials

Freaking expensive, but it is damned fine.ASONIC HQ 72-102 is a synthetic high-temperature lubricating grease, for use in limited slip differentials. Due to the careful selection of product components and the clean manufacturing environment, ASONIC HQ 72-102 is a rolling bearing grease with a particularly low noise level.Benefits for your application:High-temperature lubricating grease for rolling bearingsHigh purityLow noiseGood water resistanceContent:1 piece, tube with 30g

Content: 30 Gramm (€730.00* / 1000 Gramm)

€21.90*

y1433 Protect bellow for ball stabilizer

Genuine HT spare/option part. Protects stabilizer ball and stabilizer socket against dirt and prevents a clamping as well as a stiffness of the ball stabilizer. Suitable for the ball stabilizer of front and rear axle of Competition 07, Evo 04, Evo 07, Evo 08 and for Evo 2020..Dimensions:Inner diameters: 5 mm/15 mmLength: 52 mmContent:2 piece

€14.90*

Alternatives

y1433 Protect bellow for ball stabilizer

€14.90*

Similar products

1018/01 FG Tuning Throttle linkage

Genuine FG spare/option part. Tuning rods with flexible ball head for the screw on the engine.Fits on all FG models with lying engine.Contents:1 piece

€8.90*

1018/05 FG Spacer bushing 5 x 20 mm for raising throttle linkage

Original Losi Ersatz-/Tuningteil.Spare parts for Evo Porsche to get there without any problems with the linkage on the fuel tank. But also a very useful distance bolts of it is because the gas / brake / hydraulic linkage to the servo to insert later. Therefore will make the bending of the linkage in most superfluous.The recommended screw us with the part number 6724/12 available as a link in the lower part of the page for accessories.Contents:1 piece

€3.90*

1039 FG Alloy gear plate Evo 04 - 08

Genuine FG spare/option part.Only suitable for alloy gear flange-engine mount 1040/05.See below for layshaft 10x19x7 mm and clutch bell 10x22x6 mm bearings.Content:1 pieces

€54.90*

1075 FG Rear alum. damper plate EVO/Competition

Genuine FG spare/option part.The damper plate 2011 received further adjustment borings for the shock absorbers. According to a modified set-up the shock absorbers can be mounted much flatter in combination with the rear alum. damper mount. The model therefore has much more cornering grip.Suitable for the Competition 07-510 and 07-530 models as well as for the Competition EVO 08-510 and EVO 08-530 models.Contents:1 piece

€48.30*

1038 FG Rear bowden cable holder Evo 04 - 08

Genuine FG spare/option part. Is sheeted in the Evo 04 / 08 in connection with the mechanical disk brake.Only suitable for Evo 04-08 gear plate 1039Content:1 pieces

€29.90*

1078/01 FG Alloy upright extension for Evo 04 - 14

Genuine FG spare/option part. Suitable for all FG models with original FG alloy uprights (6477). Not suitable for F1 models. Contents:1 piece

€21.90*

1072/03 FG Rear alum. damper mount 2011 for Evo 04 - 14

Genuine FG spare/option part.The mounting of the rear damper mounts allow a higher pitch of the rear shock absorber.The model therefore has more stability in curves. Suitable for the FG Competition / EVO 04- 14 models.Contents:2 pieces

€50.50*

1071/06 FG Ball guide 5,5 mm front, for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2.Can also be installed on FG Evo 2020 using the FG 1071/04 clambing bolts.Content:1 piece

€13.90*

1071/05 FG Stabilizer rod mount 4 mm rear, for Evo 2020

Genuine FG spare/option part. FG Stabilizer rod mount 4 mm rear, for Evo 2020Content:4 piece

€38.50*

1071/07 FG Ball socket 5,5 mm front, for Evo 2020.2

Genuine FG spare/option part. for FG Evo 2020.2Can also be installed on FG Evo 2020 using the FG 1071/04 clambing bolts.Content:1 piece

€13.90*

1074/01 FG Guide bush without collar

Genuine FG spare/option part. Is needed for 1074. Dimensions:6 x 8 x 10 mmContents:4 pieces

€3.50*

1063/02 FG Spacer bushing, rear axle brace Evo truck 04 - 08

Genuine FG spare/option part. When installing the higher Truck rear axle riser plates, these spacer are needed to compensate for the increased height difference between engine mounts (1063/01 and 1040/05) and rear axle brace 1063.Small spacer: 8 mm hex, 9.1 mm height, 4 mm bore.Large spacer: 10 mm hex, 9.1 mm height, 5 mm bore.You'll need a longer screw (M4x20) for installation of the r/h engine bracket 1063/01.Fits for Evo 04 - 08. Contents:2 pieces

€4.90*