See photos for condition and scope of delivery. Very nice and mint condition transport bag from Weber. Dimensions: - Length 800 mm - Width 450 mm - Height 350 mm
1 piece
Our 4WD models are attractive and very popular. The wheelbase of the WB535 version is 40 mm longer. This modification improved the directional stability as well as further driving qualities significantly. Equipment of the modelAngled 4 mm alloy chassis with countersunk borings at the bottom, 4-wheel belt drive, belt drive cover, differential gear at front and rear axle with hardened bevel gearwheels, closed front axle housing, closed belt drive at the rear, adjustable double wishbones at front and rear axle, all driving parts and gearwheels made of case-hardened steel, adjustable servo saver, 4 adjustable oil-pressure shock absorbers, rear gear brake, alloy side plates, Monster tires with chrome-plated rims, polycarbonate body shell, decal set.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The model is equipped with a original 26 cm³ Chung-Yang (series engine) combustion engine with muffler and ready-for-use oiled filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-starter system the engine can be started without any difficulties.The pictures may display the car with some optional items which are not included, like bed-mounted rollbar, lights, front bumper or mirrors. These items can be added in the drop down menus.The RTR-version is delivered with assembled and preset radio control system and rechargeable batteries. to complete the non-RTR version all popular servos and radio control systems are suitable.Dimension:Length: 780 mmWidth: 510 mmHeight: 350 mmWheelbase: 535 mm
Exciting news for the modeling world: Introducing the new 1:5 Supreme V4.With a fresh design and innovative tread patterns for even higher performance. We are thrilled to present the 1:5 Supreme V4 – our revolutionary tire for the world of four-wheeled modeling. The new V4 aims to raise the bar in competitions and cater to the needs of drivers. It features a redesigned tread with new patterns meticulously crafted for enhanced performance. Let’s see its key features: Exceptional Grip: Advanced tread patterns for unparalleled traction on various asphalt conditions. Simplified Driving: Superior control for a smoother and more effective driving experience. Enhanced Durability: Thanks to the new tread design, the tire’s performance remains consistent even in longer sessions. Available in Three Different Compounds. Like all our products, the V4 is available in various compounds to accommodate different asphalt conditions: - Q01 – SuperSoft - Q03 – Soft - Q05 – Medium
Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability.Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!Dimension:Outside diameter: approx. 116 mmWidth: approx. 65 mmRims: 18 mm square driveContents:2 piece
Small dent in display, but fully functional.See photos for condition and scope of delivery.Description: This balance charger input voltage monitoring for battery charging protection, supports the new generation of A123 system batteries (Li-Fe). Suitable for parallel charging of Li-polymer/Li-ion/Li-Fe/Ni-MH/Ni-Cd/lead batteries. Specification: Model: IMAX B6AC Operating Voltage Range: DC 10.0-20.0V Switching capacity: max. Charging power: 80 W / max. Discharge power: 10 W. Charging Current Range: 0.1" 6.0A
Discharge current range: 0.1-2.0A LiPo balancing current: 300mAh/cell Li-ion/LiPo battery: 1-6 cells. NiCd/NiMH battery number: 1-15 cells. Pb battery voltage: 2-20 V. Package includes: 1 x balance charger T-plug charging cable set, 1 x manual (English language not guaranteed), 1 x adapter
Premium quality Fleece Jacket with enjoyable comfort when worn and first class breathing characteristics. With the Lightscale Fleece Jacket you can show your solidarity with our famous brand and at the same time get a worth while piece of clothing made by the famous manufacturer Result who are known for their excellent textiles worldwide.The Jacket can be used in a temperature range of 8° to 20° Celsius. It keeps you warm in wind and cold conditions but does not make you perspire when the temperature rises. We therefore consider the Lightscale Fleece Jacked can be an item of all season racetrack clothing. The jacket is embroidered nicely and does not affect the comfort. The side pockets offer space for tools or small items while they are nicely incorporated into the jacked without disturbing the slim cut. Full Zip Active Fleece Jacket;Quality:330 g/qm;Material:100 % Polyester-Fleece;Full Zip, big side pockets, nested sleeve,adjustable round cord against wind;colour: black.
Regular price:
€49.90
This website uses cookies to ensure the best experience possible. More information...