y185 MadMax SUPER GRIP Soft + 24 mm hex rims 80 mm, 1 pair for HPI, Losi & Co., used
€49.90
Available
Product information "y185 MadMax SUPER GRIP Soft + 24 mm hex rims 80 mm, 1 pair for HPI, Losi & Co., used"
Scope of delivery and condition see photos.
Due to the extreme stress created by the MadMax SUPER GRIP tires, the rim has been optimized again.
The tires come with a special rigid insert which transfers the applied forces without tilting; even with the heaviest cars like the Losi 5ive-T.
All together, the SUPER GRIP lives up to its name and provides maximum grip, which makes it necessary to use the supplied 3 mm beadlock screws for the MadMax EXTREME rims instead of the usual 2.5 mm screws. Additionally, the seating of these screws should be checked after each use.
The MadMax SUPERGRIP tires have been designed especially for use on tarmac. Even on fine-pored tarmac your car will still find enough grip! (As you can see in our video.)
On most 1/5 and 1/6 cars the best combination is the use of 60 mm wide front and 80 mm wide rear tires. The Losi 5ive-T Mini should run 60 mm wide MadMax SUPERGRIP tires all around, because the 80 mm wide SUPERGRIP tires are a bit too wide for the Mini body shell.
The 80 mm wide MadMax tires are reinforced on the inside of the carcass with a special cross pattern in the tread section and ribs in the outside shoulder.
MadMax SUPERGRIP tires are available in the following compounds: (embossed marking on the inside shoulder!)
Login
Customers also viewed
1 pair of Formula 1 tyres S1 on white GRP rims with 18 mm square, used. -Diameter 133 mm -width 65 mm See photos for condition and scope of delivery.Also for many off-road models such as FG and Carson with 18 mm square, who want to drive their vehicle on asphalt to protect their off-road tyres, as these are not suitable for this use.
To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery
Scope of delivery and condition see photos.GIANT GRIP 190 x 70 with black MadMax Extreme rims, 20-fold bolted, extremely robust, with 24 mm hexagonal mount and reinforced silver rim rings for Losi 5ive-T and Desert Buggy XL as well as all HPI Baja and 5T models. The GIANT GRIP tyre = gigantic grip! 96 extremely sturdy lugs, approx. 1 cm² thick and 5 mm high, enable optimum power transmission and achieve optimum grip, even on loose surfaces such as sand and earth. Due to the extreme stress caused by the GIANT GRIP tyres, the MadMax rim has been further optimised with a reinforcement ring. The GIANT-GRIP tyres are equipped with a special rigid tyre insert that transfers the applied force without tilting, even on heavier models such as the Losi 5ive-T. Dimensions: Outer diameter: 190 mm Tyre width at the rim mount: 70 mm Tyre width at the outer edge of the tread: 80 mm Reinforced 24 mm hexagonal rim mount The MadMax GIANT GRIP are mounted on 60 mm wide rims (No. y1415/01 or y0761/01)!1 pair
Includes HT-Edition parts set worth over 150.- , consisting of:: TT1000 Top Tuning Electronic 20 Amp Bigscale high voltage 30 Volt switch TT1000 Top Tuning Electronic 20 Amp Bigscale high voltage 30 y0558 HT Car Bag XXL for Losi 5ive-T/2.0, Mini 5ive WRC, Desert Buggy XL and many more y0558 HT Car Bag XXL für Losi y1312 Twin hose bracket 3 pieces y1312 Twin hose bracket When the original 5IVE-T was introduced the world of 1/5-scale off-road racing changed, and this iconic platform became one of the most successful and influential platforms to date. Now get ready for 2.0! The Losi 5IVE-T 2.0 BND: 1/5 4WD Gas Short Course Truck has all of the unrivaled performance of its predecessor and includes Bind-N-Drive technology, allowing you to pick the transmitter that best fits your lifestyle. The powerful Zenoah G320 32cc engine has been built specifically for the 5IVE-T 2.0.The revised chassis layout reduces the front drive shaft angle for improved durability and increased 4WD balance. Plus, the new rack style bellcrank steering assembly makes for easy Ackermann changes and overall improved steering geometry. Additional advances include an updated front hood, upgraded brakes, and hard anodized bleeder caps and shock bodies for improved shock performance. All this ensures the 5IVE-T 2.0 continues to reign supreme.Key FeaturesGenuine Zenoah G320 32cc engineInnovative Bind-N-DriveSpektrum SR6000T telemetry-ready receiverImproved bar style steering rack with adjustable AckermannImproved center differential orientationImproved drive line angleHeavy-duty brakesInnovative clutch mount with gear mesh braceTough steering and gas/throttle servo braceExtra-large 800cc capacity fuel tank What's in the Box?Losi 5IVE-T® 2.0 BND 4WD SCTSpektrum 6200A DSMR 6-Ch AVC Telemetrie receiverZenoah 32cc Gasoline Pull-Start EngineS900S 1/5 Scale Metal Gear Steering ServoS901T 1/5 Scale Metal Gear Throttle ServoWheel WrenchRod End/Shock End toolMulti WrenchSpark Plug WrenchBind PlugExhaust Gasket2.0mm, 2.5mm, 3.0mm, 4.0mm Allen WrenchesProduct Manual Dimensions Height: 181 mm Length: 965 mm Width: 520 mm Weight: 17 kg Needed to CompleteAppropriate Charger like DYNC0505WTransmitter / receiver eg: DX2E or serial receiver compatible e.g: DX6R87-92 Octane Gasoline2-Cycle Motul Oil e.g: y0813/02Gas can e.g: y0686Contents:1 piece
Front tiresUltragrip 170x60 on black HPI rims with 20 beadlock screws, with 18 mm square socket and reinforced orange headlock rings for FG, Smartech and many more.150 shifted long lugs and a central, 4 mm high ridge on the 60 mm wide front tire.The flattened profile structure of the rows of knobs reduces the directional control and guarantees an exceptionally good on-center feel!This makes the car less prone to unwanted traction rolls!Due to the extreme load created by the GPM Ultragrip tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars.The GPM Ultragrip are designed for use on sandy surfaces.We recommend to check the beadlock screws after the run.Dimensions:Outer diameter: 170 mmFront tire width: 60 mmReinforced 24 mm hexagon wheel driveRear tiresBIG DIGGER 170x60 with black HPI rims, 20-fold bolted, with 24 mm hexagonal mount and reinforced orange rim rings for Losi, HPI, Carson and many more. Due to the extreme stress caused by the MadMax BIG DIGGER tyres, the rim has been further optimised with a reinforcement ring. The MadMax tyres have 84 extremely strong lugs, each measuring more than 1 cm² and 6 mm high, which enable optimum power transmission and provide excellent grip even on loose surfaces such as sand and earth. The tyres are equipped with a special rigid tyre insert that transfers the applied force without tilting, even on heavier models. We recommend checking the screw connections on the rims after use. Dimensions: Outer diameter: 170 mm Tyre width: 60 mm Reinforced 26 mm hexagonal rim mount - 2 pairs