y0123 HT steel pinion for clutch bell 18/44

Original rc-car-online spare/tuning part.  The sprockets are milled from steel and nitride-hardened. They all fit on the standard main gear and are fastened with 2 grub screws. The sprockets are profile-shifted and therefore all have the same diameter!  Module: m=1.51 piece

With the Big Scale-EXTREME an adjustable clutch for very special requirements has been designed:For large-displacement enginesFor heavy or high traction cars (Losi, HPI)For modified performance enginesFor the demanding off-road useRapid wear of a clutch is a sign of constant slipping, even beyond engagement speed. In this case, the clutch does not transfer the applied torque.This is where the Big ScaleEXTREME sets a new standard.The new design of the "Extreme" prevents the centrifugal forces of clutch springs or lever side of the clutch shoes from counteracting the centrifugal force of the friction pad side even after engagement.As a result this clutch can transfer lots of power with minimal wear.The new design ensures that the centrifugal forces are transferred in full to the clutch lining. Precise engagement and disengagement even under high loads and inside of closed clutch bell carriers means no problem for this clutch.The clutch can be easily adjusted to the engagement speed through three set screws without clutch bell removal, so you can match the characteristics of your engine.The special clutch lining of the Big Scale-EXTREME is particularly wear-resistant and - especially in combination with a high-quality nitrited clutch bell (), guarantees for an exceptionally long service life! Contrary to the "Cross" or "Race" version there's no need to uninstall the clutch from the engine for maintenance. All parts are easily accessible from the front after removing the front plate.Please see the specifications tab for further information and handling advices!The regular price of the Big Scale-EXTREME is EUR 139.90

Item N° 6431/01 Steel pinion 16 teeth, wide - 1pce.For use on the clutch bell of FG monster cars.Diameter 26.7 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule: m=1,5

The Leopard 2 Sportsline is the affordable entry into the 2WD competition class. You will hardly reckon the differences in construction compared to the bigger brother - the Leopard 2 Competition, just a few more plastic parts were used. Nevertheless this is no disadvantage at all! The Leopard 2 Sportsline offers ready-to-drive competition technology to a sensible price for beginners.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter: Reflex Wheel Pro III 2,4 GHzReceiver: Mini BECHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery The driving components are built on a 4mm aluminium chassis. The extremely long double wishbones at front and rear axle result in a vehicle width of 470mm. The long wheelbase of 530mm as well as the large-volume oil-pressure shock absorbers care for a balanced driving performance. The lateral splash-guard and the almost closed bodyshell prevent engine, servos a.s.o. from dirt.HT-Edition? HT-Edition means: this version comes with a big set of spare / option parts included. Steel pinions - Non-standard sizesEach of two different ratios are supplied with.Modul: m=1,5Value: 62,60 EURAlloy engine mount bigCNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included. Value: 64,95 EUR Alloy spur gear carrierUse for 39T - 44 teeth spur gears.Value: 39,90 EUR Ball bearing set, sealed, set of 14The seal rings on sealed ball bearings keep dirt and dust out of the bearings. They are therefore particularly suitable for use in dirty and dusty environments.Value: 59,90 EURTotal value: 227,35 EUR The model is equipped with a powerful 26 cm³ combustion engine with tuning pipe and ready oiled air-filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 litres enables you to run your model around 45 minutes. With the installed pull-start system the engine can be started without any difficulties. The RTR version is delivered with assembled and preset 2.4 GHz radio control system and rechargeable batteries, either with painted or clear bodyshell. To complete the non-RTR version with clear bodyshell all popular servos and radio control systems are suitable.Dimensions:Length: 750 mmWidth: 470 mmHeight: 330 mmWheelbase: 534 mmThe video shows the FG-Marder in terrain!