Rear lower alloy wishbones salon cars, setSet contents small rear lower wishbones, alloy ball-and- socket joints, hardened wishbone pins, small parts, screws.Suitable for 4WD Mini Cooper and for FG 2WD Touringcar like the Sportsline or the Ecoline too. Or suitable for all 1:5 models with a width up to 400mm.
The set includes right and left rear axle mounts, damper plate and screws.Suitable for Off-Road Buggy 2WD/4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR, for all 2WD/4WD On-Road models. For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.https://rc-car-online.de/en-ersatzteile_main,15.html
Genuine HT spare/option part.The set includes uprights, steering arm, alloy stoppers, screws.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR and Mini and Leopard 2 und 4WD.Contents:1 set
Genuine HT spare/option part. Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster-/ Stadium- Modelle 4WD RTR, 4WD Porsche and Mini. Set included:2 x Front upper alloy wishbones2 x Aluminum balljointsBushingsScrewsTaper disksContents:1 set
Genuine FG spare/option part. Precise, solid and reliable, for use at competitions, not adjustable.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Content:1 set
Genuine FG spare/option part. The advantage of a one-way clutch over conventional or limited slip differentials is the combination of maximum propulsion and outstanding agility in the turns. This results in a 4WD vehicle with the quick turning-in of a 2WD while retaining the advantages of 4WD traction when accelerating out of corners.This applies to offroad and street cars alike.The inner races in the one-way clutch feature the internal spline drive to accept FG differential shafts. They are made of high strength steel, hardened and ground to very close tolerances. Combined with the large one-way clutches, this guarantees the transfer of the high maximum torque.Installation is pretty easy; the one-way clutch unit replaces the bevel gears in the diff including the satellite gear shaft and is inserted as a single piece into the differential case. You just have to take care that the side where the writing on the clutch can be seen goes to the left hand side (in the direction of travel).Fits FG-plastic differential case and HT- or FG-aluminum cases for non-self-locking differential versions.For vehicles not equipped with in-wheel brakes it should be noted that there will be no more braking action in front from the layshaft brake when running the one-way clutch as a front differentialOnly for 4WD models. Suitable for all differential housings except viscous and Powerlock diff.Contents:1 piece
Genuine FG spare/option part. Conversion kit for standard differential. Precise, solid and reliable, for use at competitions.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR.Contents:1 set
Genuine spare/option part.The set contents rear upper wishbones, alloy ball and socket joints, hardened wishbone pins, small parts and screws.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/Stadium models 4WD RTR, 4WD Porsche and Mini.Contents:2 wishbones, rear upper2 alloy ball and socket joints2 hardened wishbone pinssmall parts and screws
The set includes belt pulley housing right and left, screws. Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR, 4WD Porsche.
Genuine HT spare/option part.The set includes uprights, steering arm, alloy stoppers, screws.Suitable for touring cars, 530/535 mm weelbaseContents:1 set For older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.https://rc-car-online.de/en-ersatzteile_main,15.html
Item N° 68407 Aluminium differential .fourfold self-lock 4WD, setThrough locking of the drive wheels with friction washers the drive wheels have a higher torque. Additional this differential can also be locked mechanically by set screws.Suitable for the 1:5 Sportsline 4WD Touring car models and the 4WD 1:6 Buggy and Monster models. For the assembly you need the rear axle cover Item N°. 68407/01.
Item N° 68407/01Rear axle cover w. rubber plug, 4WD, setThis rear axle cover is necessary for the assembly of the 4WD alum. differential fourfold self-locking (Item N°.68407). It allows the adjustment of the differential from the outside.
Set includes right and left rear axle mounts, damper plate, screws.Suitable for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster/ Stadium models 4WD RTR, 4WD Porsche and Mini.Not suitable for Off-Road Buggy WB535 models!
Genuine HT spare/option part. One-piece lower front a-arms with replaceable bushings.You need a pair of our rose joints to complete the a-arms. FG # 4466 can be used as well. One piece per pack; l/h or r/h.Contents:1 piece
Genuine FG spare/option part. Fits FG 2WD Marder.Offer your Marder a new life - it will be out of all recognition! Aggressive in the curves, dead on the line - just everything which guarantees pure driving fun. The well-tried 4WD by FG is now available as conversion kit for your 2WD Marder. You will not realize from the outside that the model is equipped with a fourwheel drive. But you and your rc-car friends will notice it considerably as soon as you start your model and speed up properly.The conversion kit includes all parts necessary to convert your 2WD Marder to a 4WD Buggy. A mounting instruction is enclosed.Please note: the radio plate is designed to accept a 805-sized servo (case length 65 mm). For installation of a Rhino (case length 58 mm) or a similar sized servo you need to order radioplate 68241 separately.Contents:1 set
Solid universal joints made of hardened, high-quality steel for the front axle of Leopard 4 RTR. With ball drive and ball diff. axle. The model has a higher steering deflection and a smoother driving performance in curves if you mount this universal joint.
Race ported top end set for Zenoah G240 engine.The SPEED TEC CRANK genuine Zenoah G230 race ported top end set is optimized for performance with sophisticated craftsmanship and when accurately installed - guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC Crank version modifications: Cylinder: Adjustment of compressionEnlarged portsFuel management milledMachined and polished exhaust and intakeThe case is specially matched with enlarged and polished cross section towards the ports Piston: Weight reducedSkirt shortenedPiston above and below piston ring tapered and piston dome polished The set includes the following items: Performance-optimized cylinder and piston, piston ring, piston pin, piston pin circlips and cylinder gasket.To achieve the optimum performance gain of a SPEED TEC CRANK top end set, we recommend the use of a tuned pipe ().Each SPEED TEC Tuning cylinder set comes with a small amount of a spec. assembly lube for the installation of piston and piston ring. This spec. lube provides the required lubrication to the engine for the first start and dissolves without residue!
€259.90*
This website uses cookies to ensure the best experience possible. More information...