31 products found for "y2007"
Catalogue #1
The brushless Big Scale servo is an extremely robust digital servo, with a high performance brushless motor, in absolute premium quality, with a full aluminum case for optimal heat dissipation in the 2-version with elaborate cooling fins, metal gears and equipped with high-quality 30 cm long silicone insulated cable. Where with other high-performance servos you still have to buy an aluminum top or case as third party options, the brushless Big Scale servo already comes with a full metal case, and above all, the aluminum to features special bushings for the intermediate shafts! Of course, the support from a metal top cover guarantees a much longer service life of the complete gearbox, than with a plastic version! Defective gears are known to be the most frequent cause of failure; especially for highly stressed servos in 1/5 and 1/6 cars! The brushless Big Scale servo is also the first choice for 1/8 and 1/10 race cars, where fast reaction times and high steering forces bring up the demand for an extremely fast and reliable servo! Also, servo mounting tab breakage on the servo cover is virtually impossible with the brushless Big Scale servo. Dimensions:Length: 40 mmWidth: 20 mmHeight: 41.4 mmWeight: 72 gramsPerformance:7.4 V6 VHolding torque kg-cm/oz-in30.0/41726,0/361Speed sec./60°0.110.14Accessories included:Three different plastic servo horns / discFour each rubber grommets and guide sleevesMounting screwsNote: Due to the extreme holding power of the brushless Big Scale servo the rubber grommets should always be installed in combination with the guide sleeves. The brushless Big Scale servo comes with accessories in a high quality plastic case with molded insert.We recommend an aluminum servo arm from the selection of the article:Alloy servoarms, for 25 teeth multi-tooth shaft 9,90 EUR
Genuine HT spare/option part.Small parts, like ballbearings, sealings and case screws for Digital Big-Scale Brushless Servo #y2007Contents:1 piece
Genuine HT spare/option part.Servo arms und supplies for Digital Big-Scale Brushless Servo #y2007Contents:1 piece
Genuine HT spare/option part.Complete engine set for Digital Big-Scale Brushless Servo #y2007Contents:1 piece
Genuine HT spare/option part.Complete case set for Digital Big-Scale Brushless Servo #y2007Contents:1 set
Genuine HT spare/option part.Complete gear set for Digital Big-Scale Brushless Servo #y2007Ball bearing dimensions:Inner diameter: 6 mmOuter diameter: 10 mmWidth: 2.5 mmContents:1 set
Genuine HT spare/option part.Alloy top case with bearings for Digital Big-Scale Brushless Servo #y2007Contents:1 piece
The brushless Big Scale servo is an extremely robust digital servo, with a high performance brushless motor, in absolute premium quality, with a full aluminum case for optimal heat dissipation in the 2-version with elaborate cooling fins, metal gears and equipped with high-quality 30 cm long silicone insulated cable. Where with other high-performance servos you still have to buy an aluminum top or case as third party options, the brushless Big Scale servo already comes with a full metal case, and above all, the aluminum to features special bushings for the intermediate shafts! Of course, the support from a metal top cover guarantees a much longer service life of the complete gearbox, than with a plastic version! Defective gears are known to be the most frequent cause of failure; especially for highly stressed servos in 1/5 and 1/6 cars! The brushless Big Scale servo is also the first choice for 1/8 and 1/10 race cars, where fast reaction times and high steering forces bring up the demand for an extremely fast and reliable servo! Also, servo mounting tab breakage on the servo cover is virtually impossible with the brushless Big Scale servo. Dimensions:Length: 40 mmWidth: 20 mmHeight: 41.4 mmWeight: 72 gramsPerformance:7.4 V6 VHolding torque kg-cm/oz-in30.0/41726,0/361Speed sec./60°0.110.14Accessories included:Three different plastic servo horns / discFour each rubber grommets and guide sleevesMounting screwsNote: Due to the extreme holding power of the brushless Big Scale servo the rubber grommets should always be installed in combination with the guide sleeves. The brushless Big Scale servo comes with accessories in a high quality plastic case with molded insert.We recommend an aluminum servo arm from the selection of the article:Alloy servoarms, for 25 teeth multi-tooth shaft 9,90 EUR
Genuine HT spare/option part.Alloy a-arm front lower for FG 4WD models. Replacement for FG item No.: 66265.For complementation you also need: HT rose joints with conical spacers, y1036, setDoes not fit FG Leopard 2WD und Sportsline onroad 4WD with 530mm wheelbase.Contents:1 piece
y2006 Top Tuning Digital pro 40 kg is a digital large scale servo with a very robust metal gears.It offers a lot of power at good speed and has a metal housing with side cooling fins.Its installation dimensions fit directly for FG, Losi, HPI and various other models! Dimensions identical to: Multiplex Rhino - Servo 32 kg FG Mega - Servo ST2605 30 kg Spectrum SPMS904WP 34 kg Spectrum SPMS904HV 18 kg Technical data: Classification: large scale servo Dimensions LxWxH (mm): 59.5 x 29.2 x 55.2 mm Operating voltage: 6 volts / 7.4 volts Torque: (Ncm): 380/400 Speed (sec / 60 °): 0.20 / 0.18 Number of ball bearings: 2 Servo gear: metal gears Seals: 3 (splash-protected) Silicone cable: with universal plug, 300 mm long Weight: 146 grams Brass output shaft 17T spline Content: 1 piece of TopTuning Digital pro servo 40 kg 1 piece double sided servo arm 70 mm total 1 piece of 40 mm single sided servo arm 4 pieces of guide sleeves 4 pieces of rubber grommets 4 pieces of fastening screws
%
This two disc DVD set of the World Championship in Brisbane / Australia in 2007, made by Chris Wright from the well known Rev-Up racing magazine.The 2007 Worlds in Brisbane, Australia finished less than a month ago and Chris Wright has worked hard to get these DVD?s out to you. Have a look at the trailer, but altogether you get 17 videos plus on the second DVD in the EXTRAS directory you will find the full race results in html so you can surf the whole event in your browser. Not content with that also in the extras directory are all the still pictures taken. There are a few hundred pictures here and if your car is not there then it was not through want of trying on our part. These pictures can be printed or used as wallpaper on your computer or even your phone. Titles like 30 minutes of glorious slow motion, the full final with commentary, opening concourse, a view of Brisbane some of it from the air, the two prize presentations - on the track and at the Banquet, lots of other videos as you would expect and a bonus video of our day at Steve Urwin's amazing wildlife park, stroking crocodiles, cuddling Koalas and a Tiger that wanted to like the camera lens, Crikey! It is all there.The DVD?s are in PAL so if you have a TV region in NTSC then you will need to play them on your computer. As the original files started life as high definition and if you play them on a DVD player that upscale?s through HDMI or Component leads, then you will see an improvement in the video quality. Not HD but possibly middle of the road.Trailer:
%
This three disc DVD set of the European Championships in Austria in 2007, made by Chris Wright from the well known Rev-Up racing magazine.On the Opening ceremony you get the full version right up to and including the fireworks display in the evening. Concourse of the cars; Track Ambience; New Parts seen there; Slow motion stuff; Quarter Finals; Semi Finals; Main Final; Prize giving ceremony. As a bonus there is a 40 minute tour of Austria taking in the centre of Vienna by foot and carriage, then out and about to Monasteries, Castles, Palaces, parks, towns and so on all set to the gentle music of Strauss and Mozart. A second bonus is the last of the six series GP?s in 2007 in the new format which has proved so successful. This is the UK GP.PAL-System
%
y2004 Model:
y2004/02 - FG 4WD Touring car models (except Porsche GT3 RSR)
Tuning aluminum rear suspension set for nearly all FG 4WD Sportsline cars: Monster-Truck, Off-Road Buggy, Marder, Beetle, Tourenwagen.Does not fit Formula 1, Leopard and Truggy!Assembled units in the pictures are completed with some parts which are not included. These parts will be re-used from the stock suspension when swapping in the aluminum version. You will also need two bags of 6100/04 Turnbuckle left/right M8/40mm.y2004/01 fits:FG 4WD Monster-Truck models and Monster Beetle models, Off-Road, Marder, Beetle, Porsche GT3 RSR and Race Trucks. The only difference between the sets is the length of the lower a-arms (y2004/01 = long, y2004/02 = short). The picture of the assembled set is used for both versions and shows the shorter arms.Part number:Name:y2001Aluminum rear upper a-armsy68401Aluminum rear lower a-arms long66213Aluminum rear shock towery66205/06Aluminum rear diff mountsy2004/02 fits:FG 4WD Touring car models (except Porsche GT3 RSR).Part number:Name:y2001Aluminum rear upper a-armsy68401/01Aluminum rear lower a-arms short66213Aluminum rear shock towery66205/06Aluminum rear diff mountsy2004/03 fits:FG 4WD/2WD Off-Road WB535.Part number:Name:y2001Aluminum rear upper a-armsy68401Aluminum rear lower a-arms long66213/02Aluminum rear shock towery66205/06Aluminium rear diff mounts
Genuine HT spare/option part.Alloy a-arm front upper for Off-Road Buggy 4WD RTR, Off-Road Beetle 4WD RTR and Monster-/ Stadium- Modelle 4WD RTR, 4WD Porsche and Mini. Replacement for FG item No.: 66266Contents:1 piece
%
y2003 Model:
y2003/03 - FG 4WD Marder and FG touring cars with 510 mm wheelbase: Mini Cooper and Porsche GT3 RSR
Tuning front suspension set for all FG 4WD Sportsline cars: Monstertruck; Baja; Marder; Beetle; touring cars:Not fit Formular 1, Leopard and Truggy!y2003/01 fits:FG 4WD Monster-Truck models, Beetle.Part number:Name:y68412Aluminum front lower a-armsy2000Alu Querlenker Front unteny68413Aluminum front uprightsy0563Aluminum shock tower Monster-Truck/Beetley1036Rose joint for alloy wishboney2003/02 fits: FG 4WD Baja Buggy.Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishboney0579Alloy roll cage brackety2003/03 fits:FG 4WD Marder and FG touring cars with 510 mm wheelbase: Mini Cooper and Porsche GT3 RSR. When installing in a Porsche GT3 RSR or Mini Cooper 4WD with 510 mm wheelbase, the steering travel limiter must be installed into the first threaded hole of the knuckle arm and not at the standard location on the knuckle as in off-road cars!Part number:Name:y68412Aluminum front upper a-armsy2000Aluminum front lower a-armsy68413Aluminum front uprightsy0578Aluminum shock absorber plate for Bajay1036Rose joint for alloy wishbone
Genuine HT spare/option part.Alloy a-arm rear upper for FG 2WD/4WD models. Replacement for FG item No.: 66225.Contents:1 piece
%
This two disc DVD set of the World Championship in Brisbane / Australia in 2007, made by Chris Wright from the well known Rev-Up racing magazine.The 2007 Worlds in Brisbane, Australia finished less than a month ago and Chris Wright has worked hard to get these DVD?s out to you. Have a look at the trailer, but altogether you get 17 videos plus on the second DVD in the EXTRAS directory you will find the full race results in html so you can surf the whole event in your browser. Not content with that also in the extras directory are all the still pictures taken. There are a few hundred pictures here and if your car is not there then it was not through want of trying on our part. These pictures can be printed or used as wallpaper on your computer or even your phone. Titles like 30 minutes of glorious slow motion, the full final with commentary, opening concourse, a view of Brisbane some of it from the air, the two prize presentations - on the track and at the Banquet, lots of other videos as you would expect and a bonus video of our day at Steve Urwin's amazing wildlife park, stroking crocodiles, cuddling Koalas and a Tiger that wanted to like the camera lens, Crikey! It is all there.The DVD?s are in PAL so if you have a TV region in NTSC then you will need to play them on your computer. As the original files started life as high definition and if you play them on a DVD player that upscale?s through HDMI or Component leads, then you will see an improvement in the video quality. Not HD but possibly middle of the road.Trailer:This will be for the moment on Blu Ray DVD discs as Toshiba have yet (after ten months) to release their HD DVD Burner drive. I have tried a few authoring programs and as it is early days they all have their problems so the easy way is to provide the original files for people to select and play. These discs ?may? work in ?some? set top players but as Sony has just upgraded the firmware on set top boxes if yours cannot be updated then you may not be able to play them. However, as the vast majority of Blu Ray players are the much cheaper PlayStation3 (which is even cheaper now the 40 gig cut down version has just been released) these discs will play in all versions. So provided you are feeding your PS3 through an HDMI interface to as a minimum HD ready TV or better still a Full 1080P TV (these files are rendered in 1080P ) you will get the WOW factor. There is a read-me file on the DVD explaining all this.What do you need to get the most out of it? You have to have a desktop/laptop that is connected to a High Def Screen or Monitor of 1920 x 1080 resolution. We also assume you have the processing power of the fastest single Pentium or a Dual Core processor (Intel or AMD), ram of 1 gig + and at least a DirectX 9 or even DirectX10 graphic card with at least 256 meg of dedicated memory on it. You also need a Blu-Ray player or read/writer (The LG one is the cheapest). Assuming under Windows XP you have Service Pack 2 installed then you should be on Windows Media 10. Under Vista you must have at least the Home Premium version or higher installed and this will give you the latest Direct X 10 drivers and Windows Media 11. Your first job is to run the NEO Player provided free on this disc. This installs the free High Definition codec in order that Win Media players these files in the correct way or Power DVD if you are using this popular player. (There is a ?read me? file on the Blu-Ray disc explaining this).Of course if you also have a DVI or HDMI 1.2 or 1.3 interface off your computer then connect it to your High Def TV and get that WOW! experience.
%
This two Blu-ray disc set of the European Championships in Austria in 2007, made by Chris Wright from the well known Rev-Up racing magazine.On the Opening ceremony you get the full version right up to and including the fireworks display in the evening. Concourse of the cars; Track Ambience; New Parts seen there; Slow motion stuff; Quarter Finals; Semi Finals; Main Final; Prize giving ceremony. As a bonus there is a 40 minute tour of Austria taking in the centre of Vienna by foot and carriage, then out and about to Monasteries, Castles, Palaces, parks, towns and so on all set to the gentle music of Strauss and Mozart. A second bonus is the last of the six series GP?s in 2007 in the new format which has proved so successful. This is the UK GP.PAL-SystemPlease not the following information provided by Chris Wright from Rev-Up racing magazine:"A lot of you will realise that for the past two years we have been filming in High Definition 1920 x 1080 resolution which gives 4-5 times the resolution you get on your normal TV or DVD. It is only in the last few months that software and hardware burners have become available and this European Championship is offered to the few of you who have the equipment needed to watch these High Definition discs and get the WOW! Factor. Sadly Toshiba have not yet made available their HD DVD burner but we are hoping it will be available for the Worlds DVD?s in October. (We will release this European Championship on HD DVD when the required burner is available).We cannot burn a DVD type menu onto Blu-Ray and have compatibility with all Blu-Ray players due to the HSCP copy protections routines built into Blue Ray players and PS3 units by order of Sony and their licensing requirements. This makes it very hard for independent authors to produce High Def content on Blu-Ray. Even when I did make various copies and by trying the disc in three different players at a large electronics warehouse and a Sony shop found that one would not play it, the second one did but the screen was covered in artifacts (copy protection routines scrabbling the picture) and on the PS3 it reduced the resolution to half what it should have been. We are in very early days at present and so far it looks like HD DVD may be the way for Independent Authors unless of course SONY wake up and alter things for us regarding their paranoia over copy protection which we understand but consider there are better ways than alienating people.So as this version at present is confined to Blu-Ray what do you need to get the most out of it? You have to have a desktop/laptop that is connected to a High Def Screen or Monitor of 1920 x 1080 resolution. We also assume you have the processing power of the fastest single Pentium or a Dual Core processor (Intel or AMD), ram of 1 gig + and at least a DirectX 9 or even DirectX10 graphic card with at least 256 meg of dedicated memory on it. You also need a Blu-Ray player or read/writer (The LG one is the cheapest). Assuming under Windows XP you have Service Pack 2 installed then you should be on Windows Media 10. Under Vista you must have at least the Home Premium version or higher installed and this will give you the latest Direct X 10 drivers and Windows Media 11. Your first job is to run the NEO Player provided free on this disc. This installs the free High Definition codec in order that Win Media players these files in the correct way or Power DVD if you are using this popular player. (There is a ?read me? file on the Blu-Ray disc explaining this).Of course if you also have a DVI or HDMI 1.2 or 1.3 interface off your computer then connect it to your High Def TV and get that WOW! experience. So our apologies for it not being able to work on a set-top player at present."So, sit back and enjoy the High Definition experience these videos will give you.
y2009 TopTuning Digital pro 25 kg is a digital large scale servo with very robust metal gears.It offers a lot of power at a good speed and has a metal housing.Its installation dimensions fit directly as a throttle / brake servo for FG, HPI and various other models! Top Tuning Bigscale 25kg - servo for throttle / brake Dimensions identical to: FG 6598 t1005 10 kg Spectrum Z590 6 kg HPI SF 20W 7 kg y2007 Digital Bigscale 30 kg y2008 Digital Bigscale 20 kg Technical data: Classification: universal servo Dimensions LxWxH (mm): 40.5 x 20 x 39 mm Operating voltage: 6 volts / 7.4 volts Torque: (Ncm): 220/250 Speed (sec / 60 °): 0.14 / 0.12 Number of ball bearings: 2 Servo gear: metal gears Seals: 3 (splash-protected) Silicone cable: with universal plug, 300 mm long Weight: 62.5 grams Steel output shaft 25T spline Content: 1 piece of TopTuning Digital pro servo 25 kg 1 piece double sided servo arm 53 mm total 1 piece of 35 mm single sided servo arm 4 pieces of guide sleeves 4 pieces of rubber grommets 4 pieces of fastening screws
%
Tuning aluminum engine mount set for all FG 4WD Sportsline cars: Monster-Truck, Off-Road Buggy, Marder, Beetle, Touring Cars.Inhalt:Aluminum large engine / layshaft mountAluminum small engine mountAll necessary screws are included!
Split aluminium servo lever for more gentle screwing (with a 2.0 mm Allen key) with clamping on the servo output shaft! For servos that have an output shaft with a 17 mm multi-tooth shaft. For our y2006 Top Tuning digital Pro Servo 40 Kg Mounting holes with 3 mm diameter If you count the teeth on your servo, you can determine whether this aluminium arm fits your servo.
Aluminium servo arms are indispensable for powerful digital servos, such as those used in large-scale models.
Split aluminium servo lever for more gentle screwing (with a 2.0 mm Allen key) with clamping on the servo output shaft!For servos that have an output shaft with a 17 mm multi-tooth shaft. For our y2006 Top Tuning digital Pro Servo 40 Kg
Mounting holes with 3 mm diameter
If you count the teeth on your servo, you can determine whether this aluminium arm fits your servo. Aluminium servo arms are indispensable for powerful digital servos, such as those used in large-scale models.
Translated with DeepL.com (free version)
Casino / Lucky Seven style decal set, suitable for all cars.Dimensions:Big sheet: 450 x 240 mmSmall sheet: 270 x 210 mm
Genuine HT spare/option part. Powerfull high quality soldering torch with piezo igniter, runs on standard lighter gas. Great for removing bolts that have been installed using thread locking compound. Removable safety base for convenient hands-free operation., adjustable flameTechnical data:Flame temperature: approx. 1.300 °COperating temperature: approx. 650 °CTank capacity: approx. 26 g ButaneConsumption: approx. 20 g/hFlame adjustement: from 12 mm to 32 mmIgnition system: piezo ignition (like electronic lighters)Please note: due to shipment regulations the torch is not filled with gas when delivered!Contents:1 piece