26 products found for "y0558"

Catalogue #1

y0558 HT Car Bag XXL for Losi 5ive-T/2.0, Mini 5ive WRC, Desert Buggy XL and many more

The XXL version is especially made for the Losi 5ive-T, Mini 5ive WRC, Desert Buggy XL; Arrma Outcast/Kraton; Axial Honcho, Traxxas X-Max/XRT; UFRC GR1/Big Bully. Of course, other 1/5 and 1/6 large scale cars will fit into this bag as well; however, in this case the XXL bag gives you plenty of room for additional accessories. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 100 cmWidth: 57 cmHeight: 39 cm

€49.90*

y0553 Zenoah G260RC with Walbro carburetor WT 603B

This is the G260 in the 26 cm³ version.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€266.70*

y0557 Zenoah G230RC with Walbro carburetor WT 603B

23 cc Zenoah engine for large scale cars!The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge.Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€248.70*

y0552 HT Car Cover for all cars, 1/5 and 1/6

Genuine HT spare/option part.Fits all 1/5 and 1/6 scale cars.Made from durable fabric, easily washable, with circumferential elastic band.Contents:1 piece

€39.90*

y0551 HT Car Bag for 1/6 scale cars (Fits FG, Smartech/Carson a.s.o.)

Hobbythek car bag for 1/6 cars. Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cmWidth: 50 cmHeight: 40 cm

€44.90*

y0550 HT Car Bag for 1/5 scale cars (Fits FG, HPI, Mecatech FW01, Smartech/Carson a.s.o.)

Hobbythek car bag for 1/5 carsFits for all 1/5 models for example: FG-: HPI-; Mecatech FW01-; Carson-; Smartech-; Conrads-; Harm-; RS5-; Lauterbacher a.s.oMade from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure.No dirt in the car boot!Dimensions:Length: 95 cmWidth: 40 cmHeight: 30 cm

€39.90*

y0550 HT Car Bag for 1/5 scale cars (Fits FG, HPI, Mecatech FW01, Smartech/Carson a.s.o.)

Hobbythek car bag for 1/5 cars Fits for all 1/5 models for example: FG-: HPI-; Mecatech FW01-; Carson-; Smartech-; Conrads-; Harm-; RS5-; Lauterbacher a.s.oMade from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure.No dirt in the car boot!Dimensions:Length: 95 cmWidth: 40 cmHeight: 30 cm

€39.90*

y0518 Hobbythek service bag

Genuine HT spare/option part. Special fabric bag to protect engines, rc-plates or other expensive items. Large opening and pull-string closure.Size:Diameter 200 mmHeight 200 mmContents:1 pieceAccessories not included.

€6.50* €7.90* (17.72% saved)

Bergyogi DVD Sinsheim 2006, y0858

Video DVD covering the legendary indoor race for 1/5 touring cars in Sinsheim/Germany. More than 80 contestants, well known drivers like Ian Oddie, Hessel Roskam, Clark Wohlert, Markus Feldmann, Jennifer Bernauer, Roland Iff, Pascal Seegers and many many more among them, are proof for the importance of this race to the scene.This DVD also includes the ranking list and a photo show. Total run time: 112 minutes, PAL system, full screen.

€11.80* €23.60* (50% saved)

y1558/01 LED bar Spare part

Genuine rc-car-online spare/option part. Spare part for y1558 and y1559.Dimensions LED:Length: 310 mmHeight: 10 mmContents:1 piece

€24.90*

y1558/02 LED module for radio control, Spare part

Genuine rc-car-online spare/option part. Spare part for y1558.Contents:1 piece

€44.90*

y1558/03 LED module with switch, Spare part

Genuine rc-car-online spare/option part. Spare part for y1559.Contents:1 piece

€44.90*

y0568 Bowden cable mount 1/5, 2 pcs.

€12.60*

y0758 Special exhaust manifold screw set, 5 pcs.

Cap screws for 1/5 & 1/6 large scale cars, DIN 912 - 8.8 M5x16 with corresponding spring washers DIN 127.The spring washer's tension prevents loosening of the manifold screws.Bag with five each screws and spring washers.Part is delivered in silver or black color from vendor!

€3.90*

y0458 Foam inserts for Monster/Stadium Dirt Grip tires

Genuine HT spare/option part. Tires inserts for Monster Dirt Grip tires or extra wide Mammoth tires with stadium rim.Dimensions:Length: 395 mmWidth: 60 mmHeight: 15 mmContents:2 pieces

€9.70*

y0548 Hobbythek Polo Shirt, long sleeve "M", 1 pce.

Top quality polo shirts made from 100% combed cotton! With bright orange rc-car-online logo printed on front and back.Sizes available: M

€29.90*

y1558/04 Losi 5ive-T LED mount, Spare part

Genuine rc-car-online spare/option part. Spare part for y1558 and y1559.Dimension mount:Width: 160 mmHeight orifice: 8 mmHeight behind orifice: 10 mmContents:1 piece

€12.90*

y0658 Narrow-Grip 462 type tires for Losi, HPI, FG, Carson and Co.

Off-road tires for sandy underground! Gives great results on those carpets which are typical for some off-road tracks. 462 grippy square studs per tire, a total of more then 1800 for a complete set of tires, guarantee maximum traction! The lower profile of the outer stud rows reduces lateral traction and guarantee exceptional directional stability! Therefore the car is less prone to undesirable side rolls! The rim is the 6-spoke design with a steel reinforcement ring around the wheel drive. The NARROW-GRIP tires are available with either 18 mm square drive to fit FG & co. or with 24mm hex for Losi, HPI Baja 5 series cars and they allready glued!To prevent premature wheel drive wear the fit to the rim is very tight. Therefore the rim should be properly aligned with the square or hex drive and completely mounted via tightening the wheel nut! Dimensions:Outer tire diameter: 175 mmTire and rim width: 62 mmRim inner diameter: 119 mmWeight for one tire: 375 grams / for a pair: 750 gramshe manufacturer of the Narrow-Grip 462 indicates that the use of these tires on very heavy models, like the Losi 5ive-T under heavy conditions, such as jumps and shifting / tilting of the chassis, may lead to breakage of spokes or hex socket. Due to this notice that kind of failure will not be compensated. We apologize for this note!As an alternative, we recommend our special offer for the Losi 5ive-T OEM tires and in particular all tire combinations with MadMax EXTREME rims for FG, Smartech and Co.:y1400/01 - Tarmac Bustery1401/01 - Big Digger y1402/01 - Cross Bond y1403/01 - Over Lander y1404/01 - Giant Grip y1416/01 - Ultra Gripor for Losi and HPI models: y1406/01 - Big Digger y1407/01 - Cross Bond y1408/01- Over Lander y1409/01 - Giant Grip y1417/01 - Ultra Grip18 mm square for FG & co24 mm hex for Losi and HPI Baja 5 Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (18 mm square for FG & co24 mm hex for Losi and HPI Baja 5 Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable. Wheels drives:18 mm square for FG & co.24 mm hex for Losi, HPI Baja 5 cars.Contents:2 pieces / 1 pair

€44.90* €49.90* (10.02% saved)

Shock absorber oil 10W for HPI and Mecatech Klick-Shocks, y0058/10, 1 pce.

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

Shock absorber oil 20W for HPI and Mecatech Klick-Shocks, y0058/20, 1 pce.

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

y0578, Alloy front shock tower for FG Sportsline and Off-Road 4WD, 1 pce.

Aluminum front shock tower for FG Off-Road Buggy and Sportsline 4WD, replaces stock plastic part FG #66287.Stock mounting hardware will be re-used.

€59.90*

y0058 Shock absorber oil 10W - 20W for HPI and Mecatech Klick-Shocks, 1 pce.

y0058 Viscosity: 20w, y0058/20

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.Viscosity of silicone oil at various temperatures.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

Shock absorber oil 15W for HPI and Mecatech Klick-Shocks, y0058/15, 1 pce.

Shock absorber oil, especially for HPI Baja 5B RTR and Mecatech Klick-Shocks, 100 ml bottle.HPI does not recommend silicone oil in their RTR shocks.

Content: 100 Milliliter (€49.00* / 1000 Milliliter)

€4.90*

y0358 Riot Pipe 3-chamber tuned pipe system for Carson Wild GP Attack and HPI Baja buggies

Chromed three-chamber tuned pipe system for Carson Wild GP Attack and HPI Baja buggies from the Australian exhaust manufacturer Powerslide Racing. Theres no need for cutting the stock Baja body shell for installation! Unlike many tuned pipe systems which are mounted in the rear of the Carson Wild GP Attack and HPI Baja cars and compromise power output due to the restricted available mounting space, the side mounting of the Riot Stampede allows for an optimized three-chamber system.You can see the Riot Stampede's multi-chamber design in the cutaway model shown in picture 9. The mounting system of Riot Stampede is secured by a tension spring and also provides the necessary flexibility even for jumps. The side mount uses a chromed adapter which is securely bolted to the chassis frame of your car. Set includes: Chromed tuned pipe Header and mounting bracket Complete installation hardware, as well as tension spring and exhaust hose

€189.90*