18 products found for "fg_7080"

rc-car-online - Home

7080 FG Rear dogbone 90 mm

Genuine FG spare/option part. Standard driveshaft, short version.Fits FG Audi, BMW 320, Peugeot 307, Renault Megane und VW New Beetle.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 90 mmContents:1 piece

€22.50*

7080/03 FG Distance disk - 4pcs.

Rubber pad, fits inside of ball drive cups.Diameter 10.7 mmThickness 1.6 mm

€3.60*

Details

7080/04 FG Balance spring tapered, 4 pcs.

Item N° 7080/04Balance spring tapered, 4 pcs.

€5.90*

7080/02 FG Balls for ball driveshaft, 5 mm

Genuine FG spare/option part.Replacement balls for ball driveshaft.Contents:six pieces

€4.90*

7085 FG Shock absorber body

Genuine FG spare/option part.Spare part for 7083.Contents:1 piece

€15.10*

7081 FG Rear dogbone 96 mm

Genuine FG spare/option part.Standard driveshaft, medium length. Fits BMW M3 GTR, Mercedes C-Klasse DTM 04, Mercedes CLK-DTM, McLaren GT, Honda Accord, Dogde Viper, Opel V8 und Porsche Carrera GT.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 96 mmContents:1 piece

€23.90*

7089 FG Shock piston

Genuine FG spare/option part.Spare part for 7083, 7200, 7201, 7202, 7203, 7204.Dimensions:Outer diameter: 13.3 mmInner diameter: 4 mmContents:2 piece

€4.30*

7020 Front bumper for Evo/M3/GTR/E30 - 1pce.

Suitable for Mercedes 190 Evo, BMW M3, BMW GTR and BMW E30.Length 100 mmWidth 370 mm

€29.90*

6080 FG Rear dogbone

Genuine FG spare/option part. Replacement drive shaft (dogbone). Long Version.Suitable for BMW GTR, Mercedes CLK-GTR, Race-Trucks, C291, Porsche GT1, GT2, GT3 and all FG Off-Road models.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 101,5 mmContents:1 piece

€17.90*

7050 FG Plastic gear carrier 52mm - 1pce.

For 44T - 39T spur gears.Also available in alloy:

€13.90*

7040 FG Alloy brake caliper

Genuine FG spare/option part.For brakes with two brake disks (on the layshaft).Contents:1 piece

€14.50*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

7090 FG Shock piston shaft short - 1pce.

Spare part for , , , , , , , , , and .For race actions and also when using high viscous oils we recommend to mount the piston rods with fastening thread for the piston. Through tightening the piston a backlash-free connection with the piston rod is guaranteed. Mount the threaded piston rods only in connection with the alloy damper pistons.Length 55 mmDiameter 4 mmThread length 11 mmDistance between grooves 3.1 mm

€12.70*

7180 FG Damper spring 1,8mm pink, 2 pce.

Item N° 7180 Damper spring 1,8mm pink, 2 pce.Suitable for all FG shock absorbers and also for other makes with an outside diameter of 16mm.Measures:Length: 53 mmOutside diameter: 20 mmWire diameter: 1,8 mm

€11.60*

7800 FG Zenoah G290RC with Walbro carburetor WT 990

Same dimensions as the Zenoah G230, G240, G260, G270.New generation Zenoah engine with 28,5cm³ cylinder capacity and approx. 3.9 hp. The cylinder is fixed with 4 screws. The technical details are identical to the Zenoah engines G240RC and G270RC.The engine will be delivered with pull starter, carb and spark plug / spark plug cap. Genuine Zenoah air filter and / or complete clutch and / or ball beard carburetor are optionally available at additional charge. Compatibility Zenoah / Losi 5ive-T:Please note that for installation in a Losi 5ive the fan cover must be swapped for a Losi or CY cover #5341 in order to fit the chassis" bolt pattern.If you want to install a Zenoah engine into the Losi 5ive, you usually have to use a fan cover from the CY engine.However, there is a workaround to maintain Zenoah fan cover.The adjustment is done via the pinion specific mounting plates for the engine. The change always affects only the rear, outer (carburetor side) plate under the fan cover. This is rotated by 180°; so that the embossed number on this plate faces the exhaust side of the engine!18T pinion: use 20T plate, rotated 180°19T pinion: use 19T plate, rotated 180°20T pinion: use 18T plate, rotated 180°On the plus side you gain the opportunity to easily mount a Zenoah engine keeping the original fan cover. On the other hand there will be the disadvantage of the necessity to combine two different sets of engine mounting plates when installing any pinion other than the stock 19T version. Therefore we do not recommend this workaround for everyday use. Nevertheless it works perfectly should ever the need arise. Attention! We recommend to run exclusively fully synthetic 2-stroke engine oil, like y0813 Motul 800 racing oil.

€284.90*

7088 FG Volume compensation for shock absorber

Genuine FG spare/option part. Ersatzteil zu:7083 FG Shock absorbers 97 short complete7200 FG alloy shock absorber 04 short7201 FG Alloy shock absorber 04 medium-short 7202 FG alloy shock absorber 04 medium-long 7203 FG alloy shock absorber 04 medium7204 FG alloy shock absorber 04 long Content:Two pieces

€4.70*

7087 FG Upper shock retaining - 2pcs.

Spare part for .

€3.90*

GPM 7080/02 Balls for ball driveshaft for FG and Mecatech, 5 mm, 6 pcs.

Replacement balls for ball driveshaft.

€4.50*

7080/01 FG Kugelantriebswelle hinten 85 mm

Rear ball drive shaft with an overall length of 85 mm. Original FG spare part for ball drive set FG 9470. 1 piece

€19.95*

18 products found for "fg_7080"

Filter products

rc-car-online - Home