17 products found for "y1329"

rc-car-online - Home

y1329 Vehicle Decals BMW 320si WTCC

Genuine HT spare/option part. Vehicle specific decal sheet, suitable for BMW 320si body shells with the order numbers: 8144 and 8144/01.Along with headlights, tail lights, grille and door handles this decal sheet also includes various start numbers, the DEKRA start number masks and a complete set of window masks with BMW-Motorsport logo.Dimensions:Sheet with window masks: 458 x 335 mmLights decal: 247 x 397 mmContents:2 pieces

€19.90*

y1324 MadMax tyre inserts green 165x65mm, for Maxi Pin tyres

Mittelfeste, geschäumte, grüne Reifeneinlage mit profilierten Kanten und eingeformten Senkungen für die Felgenverschraubung.Die mittlere Shorehärte der grünen Reifeneinlage in Topqualität stützt die Reifenschulter optimal und ermöglicht somit ein perfektes Abrollverhalten des jeweiligen Reifens.Die ideale Einlage für einem Reifendurchmesser von 185mm und 70mm breite.Ersatzteil zu MadMax Reifen Maxi Pin.2 Stück, 1 Paar

€29.90*

y1029 HT aluminum droop stops

Genuine HT spare/option part.Required for bulkhead A (y1028).Contents:2 pieces

€32.90*

y1379 Pinion fastening set with nut for Losi 5ive-T/2.0 and Mini

This set allows for fastening the pinion to the clutch bell utilizing a full metal self locking nut when using our gas-nitrided clutch bell y0726. The screw will be fully inserted into the clutch bell from the backside using high strength thread locking compound. This setup provides a couple of significant advantages:This self locking nut does not use the usual plastic insert; therefore it is completely temperature resistant!Theres no need to wait for the thread locking compound to cure after a pinion change; the connection is safe and ready to use immediately. For safety reasons nut and spring lock washers should only be used once.No need to worry about worn-out Allen screw heads.In case the screw ever breaks at the point where it enters the pinion, it can still be removed with ordinary tools. Theres still the like new screw head inside the clutch bell ready for screw removal. Set includes:2 pieces of high strength 12.9 grade screws10 pieces of full metal self locking nuts10 pieces of spring lock washers

€5.90*

y1309 All steel linkage for steering servo/servo saver application

Genuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

€27.90*

y1389 Sealed ball bearing 12 x 28 x 7 mm

Fits Area DBXL clutch bell holder AREA-XL 003 and rear uprights AREA-XL 021. Both sides sealed (2RS) for increased dirt resistance. Does not fit stock parts!Content:Two pieces

€14.90*

y1322 Molded tire inserts for 190 mm Ø HPI + Losi tires with 60 mm width

Medium firmness molded tire inserts with shaped shoulders and recesses to match the beadlock fittings.The medium shore hardness compound of the red colored top quality tire inserts provides optimal support for the tire's shoulder and allows for perfect rolling characteristics of the tire. The perfect tire insert for the HPI-Baja 5B series with 190 mm tire diameter is available in 60 mm.Fits 10-spoke GPM-racing aluminum rims (Losi / HPI) and MadMax rims as well.Content:2 pieces/1 pair

€29.90*

y1329/04 Team Decals M Performance for BMW 320si WTCC

Team decal sheet, suitable for BMW 320si body shells with the order numbers: 8144 and 8144/01.Team decal sheet includes the following manufacturers: EXIDE, Allgeier, Sonax, Hankook, Castro, Edge, H&R, Sachs. Dimensions:Big decal sheet: 510 x 200 mmStripes sheet: 360 x 210 mmM3 rear wing lettering: 250 x 36 mm

€34.90*

y1329/01 Team Decals Post for BMW 320si WTCC

Genuine HT spare/option part. Team decal sheet, suitable for BMW 320si body shells with the order numbers: 8144 and 8144/01.Team decal sheet includes the following manufacturers: Deutsche Post, Hankook, Sonax, Castrol, EDGE, Zollner, Sachs, Allgeier, H&R, Exide, GNB. Dimensions:Big decal sheet: 390 x 200 mmPost logo for the roof: 210 x 145 mmM3 rear wing lettering: 250 x 36 mmStripes: 400 x 73 mmContents:1 set

€34.90*

y1329/03 Team Decals BMW-Bank for BMW 320si WTCC

Team decal sheet, suitable for BMW 320si body shells with the order numbers: 8144 and 8144/01.Team decal sheet includes the following manufacturers: Hankook, Sonax, Castrol, EDGE, Zollner, Sonax, Akrapovic, Allgeier, H&R, GNB, Exide, BMW Bank. Dimensions:Big decal sheet: 510 x 200 mmM3 rear wing lettering: 250 x 36 mm

€34.90*

y1329/02 Team Decals Samsung for BMW 320si WTCC

Team decal sheet, suitable for BMW 320si body shells with the order numbers: 8144 and 8144/01.Team decal sheet includes the following manufacturers: Hankook, Sonax, Castrol, EDGE, Zollner, Akrapovic, Allgeier, EXIDE, GNB, Sachs, H&R, Samsung. Dimensions:Big decal sheet: 500 x 200 mmM3 rear wing lettering: 250 x 36 mmStripes: 400 x 73 mm

€34.90*

y1229, Maxi-Pin and V-Pin foam rubber tire insert, 1 pair

Especially flex and abrasion resistant insert made of foam rubber. Dimensions specifically to match Maxi-Pin and V-Pin tires, but may be used for other tires at your own discretion as well.Length 380 mm

€9.90*

y1129 Mecatech hydraulic brake Expert for FG, Carson and many more, incl. brake bleeding set

Genuine Mecatech spare/option part. Full-metal hydraulic brake (like the former hydraulic FG brake).The set consists of two complete brake calipers for right and left, and 2 brake units, hydraulic oil and all, necessary for installation, accessories (see also our pictures)One version fits front and rearFits onroad / offroad / monster and stadium cars from FG and othersNo need for alloy uprights!Fits Formular 1 models, Competition, Sportsline and E (in connection with alloy front uprights y0932Dimensions master brake cylinder:Height: 75 mmWidth: 48 mmDepth: 13 mmContents:1 set

From €179.90*

Details

y1321 Molded tire inserts for 170 mm Ø MadMax tires with 60 + 80 mm width

y1321 Version: y1321/07 Two pairs special tyre inserts 65mm width for MadMax Giant Grip+ 16.9EUR

Medium firmness molded tire inserts with shaped shoulders and recesses to match the beadlock fittings.The medium shore hardness compound of the colored top quality tire inserts provides optimal support for the tire's shoulder and allows for perfect rolling characteristics of the tire. The perfect tire insert for the MadMax tires with 170 / 190 mm tire diameter is available in two widths.Fits 10-spoke GPM-racing aluminum rims (Losi / HPI). Applications:for 60 mm tire width: # y1321/01for 80 mm tire width: # y1321/02for GIANT-GRIP #y1321/06

Variants from €22.90*

€39.80*

y1323 Molded tire inserts green for 170 mm Ø HPI + Losi tires with 60 + 80 mm width

y1323 Version: y1323/02one pair for 80 mm tire width+ 3EUR

Medium firmness molded tire inserts with shaped shoulders and recesses to match the beadlock fittings.The medium shore hardness compound of the green colored top quality tire inserts provides optimal support for the tire's shoulder and allows for perfect rolling characteristics of the tire. The perfect tire insert for the HPI-Baja 5B series with 170 mm tire diameter is available in two widths.Fits 10-spoke GPM-racing aluminum rims (Losi / HPI) and MadMax rims as well. Applications:for 60 mm tire width: # y1323/01for 80 mm tire width: # y1323/02

Variants from €19.90*

€22.90*

y1320 Narrow-Grip 616 type drift tires, mounted and with 24 mm hex for Losi, HPI, MCD

The off-road tire for hard packed dirt and spectacular drifts!Gives great results on those carpets which are typical for some off-road tracks. 616 grippy square studs per tire, a total of more then 2.400 for a complete set of tires, guarantee maximum traction! The lower profile of the outer stud rows reduces lateral traction and guarantee exceptional directional stability and allows for spectacular drifts! Therefore the car is less prone to undesirable side rolls!The Narrow-Grip 616 tires are mounted on a flexible 10 spoke rim with steel ring reinforced 24 mm hex drive. 10 screws per beadlock ring keep the tires in place. The Narrow-Grip 616 tires feature a firm foam insert, making them suitable even for heavier weight cars.To prevent premature wheel drive wear the fit to the rim is very tight. Therefore the rim should be properly aligned with the hex drive and completely mounted via tightening the wheel nut! Attention: When using the Narrow-Grip wheels on a Super Losi Rock-Rey model, special wheel hexes are required. Also on FG and Carson models. For mounting on a Traxxas X-MAXX you need a set of special Top-Tuning wheel nuts. - TT1040 Top Tuning wheel hub 24mm/6-edge for Losi Super BajaRey/2.0 and Super Rock Rey for plastic axle stubs. - AT-004 Atop wheel nuts 4 pieces Dimensions:Outer tire diameter: 180 mmTire and rim width: 60 mmRim inner diameter: 120 mmWeight for one tire: 430 grams / for a pair: 860 grams24 mm hex for Losi 5IVE-T, HPI Baja 5, MCD Wheels drives:24 mm hex for Losi 5IVE-T, HPI Baja 5 and MCD ccars.

From €39.90*

Details

y1320 Narrow-Grip 616 type drift tires, mounted and with 24 mm hex for Losi, HPI, MCD

€77.80*

17 products found for "y1329"

Filter products

rc-car-online - Home