12 products found for "y1183"

rc-car-online - Home

y1189 Stadium wheels on disc rim, 2 pairs

Complete set of four CRT stadium tires and rims, mounted and glued with tire inserts. Fits FG and Carson 1/6 scale cars.Tire diameter 170 mm, tire width 80 mm, 18 mm wheel square. Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.Also suitable for:With the following wheel adapter: y1183 Rim adapter

€99.90*

y1183/01 Grooved pin 4x19 mm, replacement for HPI rim adaptor y1183, 5 pieces

Grooved pin 4x19 mm, replacement pins for HPI adaptor to install FG rims on HPI Baja cars.Diameter: 4 mmLenght: 19 mmDelivery contents: 5 pieces

€3.90*

y1188 Pin 4 x 18 mm, 10 pcs.

Hardened steel pins to replace lost or worn pins in driveshafts (dog bones) on FG / Carson / Smartech cars.It is recommended to use high strength thread locking compound for the installation.

€3.90*

y1583 Losi 5ive-T/B and Losi MINI 300m steel HD center differential drive cups

Genuine HT spare/option part.These heavy duty differential drive cups for the center differential in a Losi 5ive-T/2.0/B or MINI WRC are made of 300M / Böhler V132 steel and are characterized not only by high hardness, but also simultaneously toughness. The service life is therefore much higher than for the stock cups. Replaces stock parts LOSB3214 and TLR252008.300M steel is used in motorsport and aviation for high strength parts. As a highly pure material, it is significantly more expensive than conventional steels, its high basic strength and toughness make the machining a time-consuming task.The 300M steel center diff drive cup has the same dimensions as the stock part.Contents:2 pieces of 300M steel HD differential drive cup, center diff application2 pieces of 4x18 drive pins

€39.90* €79.90* (50.06% saved)

Replacement bushings 5x6x6 mm, y1182, 8 pcs.

For upper HT alloy a-arms Gas Devil.Inner diameter 5 mmOuter diameter 6 mmWidth 6 mmSet of eight

€6.10*

y1183/04 Hardware set for wheel adapter FG rim to HPI car

Hardware set for wheel adapter FG rim to HPI car:y1183y1183/02y1183/03

€4.90*

y1183/02 FG rim to HPI model, drive rim adapter, separate for the front, 2 pcs.

Item N° y1183/02FG rim to HPI model, drive rim adapter, separate for the front, 2 pcs.These adapters are machined from gas nitrited steel and enable you to put standard rims with 18 mm square drive (FG, Carson, Lauterbacher a.s.o.) on the HPI Baja 5B/SS/T. The track width will be substantially increased.For a complete set covering front and rear axle you need part number y1183.This set includes rim adapters with installation hardware for the front axle only.Measures for front:Outer diameter: circa 17,59 mLength: circa 55,10 mm

€24.90*

Team decal set Jägermeister small, y1113, 1 pce.

Sheet size 470 x 250 mm

€19.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1103 Body support

y1103 Size: y1103/01 - Small

Genuine HT spare/option part. You can select from two different sizes of body support.Dimensions small body support y1103/01:Length: approx. 80 mmWidth: approx. 16 mmDistance bore to bore: approx. 64 mmDimensions large body support y1103/02:Length: approx. 105 mmWidth: approx. 16 mmDistance bore to bore: approx. 88 mmBore diameter: approx. 8 mmContents:2 pieces

€7.90*

y1483 Walbro WT-1048 Racing carburetor

y1483 Version: y1483/01 WT-1048 Racing carburetor

Genuine Walbro spare/option part.Popular performance carburetor without choke; with 13.5 mm venturi diameter, especially suitable for large-displacement engines like the Zenoah G320.The stock throttle shaft has been replaced with the proper version required for car applications; including the throttle lever as well.All existing throttle linkages can therefore be connected as usual without modifications.This carburetor does not feature a primer bulb nor a connection for a return line. It is therefore only connected to the supply line from the tank, the return line of the tank has to be closed.Optional ball bearing of the throttle shaft can be selected from the shops menu.Contents:1 piece

€97.90*

y1163 Aluminum differential case conversion kit for FG 2WD/4WD

y1163 Version: y1163/02 for 4WD models

Genuine HT spare/option part.Alloy diff case conversion kit for FG 2WD cars and 4WD large scale cars, fits front or rear axle. You need two sets to do a complete car.Comes complete as shown with sealed bearings, installed needle bearings, shims, screws and o-rings.Please note:The differential comes unassembled, we recommend assembly tool #8505 for bevel gear installation.Contents:1 piece

€89.90*

1183/02, FG Spacer bushing 4 x 8 x 8 mm for Evo 08-14

Genuine FG spare/option part. Suitable for Evo 08-14 Is needed to compensate for the larger diameter of the truck wheels.Contents:3 pieces

€4.70*

12 products found for "y1183"

Filter products

rc-car-online - Home