34 products found for "y1047"

rc-car-online - Home

HT Aluminum front suspension for Carson / Smartech C5, UNO / R5, Attack, Superattack, GasBlaster and Touareg, y1047 - Set

The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A for Carson Comanche, Attack Evo, CRT 2WD + CPTy1210HT Aluminum front bulkhead B for Carson Comanche, Attack Evo, CRT 2WD + CPTy1036HT rose joints with conical spacersUnit prices: 269,00 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Fits on Carson 1/6 / 1:5(Attack, SuperAttack, GasBlaster and Tuareg) and Smartech UNO

€269.00*

y1027 HT Aluminum a-arm 2WD, front upper

Genuine HT spare/option part.Alloy a-arm with provision for camber adjustment. Replaceable and adjustable ball joint included.Fits FG 2WD Marder, Beetle, Pajero, Off-Road Buggy and Monster 2WD Beetle; Carson / Smartech Attack, Super-Attack und Gas-Blaster!Contents:1 piece

€44.90*

y1067 Walbro WT668C carburetor

Genuine Walbro spare/option part.The Walbro WT668C carburetor fits all Zenoah, Chung Yang (CY), Losi, HPI und PT (Smartech/Carson) engines from 23cc up to over 30cc. The Walbro WT668C features an integrated choke with lever and a throttle shaft linkage lever.The WT668B is also available with ball-raced throttle shaft under part number # y0036/04 Ballraced tuning Walbro WT668B carburetor The higher quality alternative is the Walbro WT603B, also with choke. Contents:1 piece

€69.90*

This product is no longer available.

y1045 hydraulic brake lining 4mm - 1 St

hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Length: 1 meterDimensions:Inner diameter: 2 mmOuter diameter: 4 mm

€4.90*

y1040 T-connector for hydr. brake system - 1 pce

T-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.

€14.90*

y1547 Complete screws set for Traxxas X-Maxx and XRT 4x4

Genuine rc-car-online spare/option part. Komplete set of screws set for the Traxxas X-Maxx and XRT 4x4.The set includes a total of 334 screws, in different quantities which are all used on the Traxxas X-Maxx 4x4.9 sizes of cap head screws2 sizes of CSH screws12 sizes of button head screws2 sizes of set screws3 sizes of button head screwsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:6 piecesM2,5x1410 piecesM3x102 piecesM3x1232 piecesM3x1420 piecesM3x166 piecesM3x1814 piecesM3x203 piecesM3x252 piecesM4x22Countersunk head screws in 10.9:3 piecesM4x1014 piecesM4x14Sheet metal screws in 10.96 piecesM3x650 piecesM3x88 piecesM3x82 piecesM3x102 piecesM3x1212 piecesM3x1644 piecesM4x1224 piecesM4x1424 piecesM4x166 piecesM4x2010 piecesM4x2516 piecesM4x302 piecesM4x35 Sheet metal screws with flange:14 piecesM3x103 piecesM3x123 piecesM3x16Grub screws:2 piecesM3x42 piecesM4x4

€44.90*

y1043 connector straight for hydraulic brakes - 1 pce

connector straight for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€8.90*

y1048 HT Aluminum-Frontaxle for FG Sportsline

Genuine FG spare/option part. Suitable for FG Sportsline (old version, not 4wheel drive basic) and Eco-Line.The set includes:Item N°.Name:y1027HT Aluminum a-arm 2WD, front uppery1026HT Aluminum a-arm 2WD, front lower, one-piecey1209HT Aluminum front bulkhead A y1210HT Aluminum front bulkhead B y1036HT rose joints with conical spacersUnit prices: 318,30 EURPlease note: the hinge pins are not included, you will use the pins from the stock suspension!Additional parts shown on the pictures, like diskbrakes or other tuning parts, are only decoration and not part of the set. Contents:1 set

€269.00* €318.30* (15.49% saved)

y1041 Angle connector 90° for hydraulic brakes - 1 pce

Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1037 HT Aluminum brake cable bracket

Genuine HT spare/option part.For secure installation of the brake cables.Contents:1x Brake cable bracket2x Socket head cap screws 3 x 25 mm2x Self-locking hexagon nut M3

€17.90*

y1007 CFH Diamant M50 gas torch

Genuine HT spare/option part. Powerfull high quality soldering torch with piezo igniter, runs on standard lighter gas. Great for removing bolts that have been installed using thread locking compound. Removable safety base for convenient hands-free operation., adjustable flameTechnical data:Flame temperature: approx. 1.300 °COperating temperature: approx. 650 °CTank capacity: approx. 26 g ButaneConsumption: approx. 20 g/hFlame adjustement: from 12 mm to 32 mmIgnition system: piezo ignition (like electronic lighters)Please note: due to shipment regulations the torch is not filled with gas when delivered!Contents:1 piece

€39.90*

y1046 Clemps for hydraulic brake lining 4 mm

Genuine rc-car-online spare/option part. Clemps for hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Contents:8 pieces with mounting screws

€9.50*

y1044 Y-connector for hydr. brake system - 1 pce

Y-connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.

€14.90*

y1042 Angle connector 45° for hydraulic brakes - 1 pce

Angle connector for all hydraulic brake linings with a outside diammeter of 4mm. e.g Colari, Magura II and Mecatech.Connecting thread M5

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y1247, Hobbythek/GPM Dirt-Cover Line for Carson Wild Attack, HPI Baja 5B models, set

Normal retail price: 51,80 EUR for the set. The set is suitable for all Carson Wild GP Attack, Gas Devil, Hell Devil, CRT 4x4, Smartech Thunderbolt and HPI Baja 5b models. Included in the scope of delivery: - GPM Air Filter Cover, No. BJAFCO - GPM Starter Cover, No. BJPSCO - y0515 GPM Shock-Cover y0515 GPM Shock-Cover These protective covers for the shock absorbers keep dirt away from the piston rods and seals. This significantly increases the service life of these parts. Set of 4 pieces GPM air filter cover, no. BJAFCO GPM air filter cover, the pre-filter cover is simply slipped over the existing air filter. An elasticated band at the bottom secures the cover to the filter. The maintenance intervals for the main filter are extended enormously, especially in very dusty environments. Suitable for almost all standard filters, both foam and K&N. 1 piece GPM Starter Cover, No. BJPSCO The ‘air filter’ for the pull starter, prevents the starter from becoming clogged with dirt or grass. Also improves engine cooling when riding on grass, as less grass gets into the cooling air duct. Easy to fit using Velcro tape. With metal cable guide. 1 piece

€39.90*

Shims, 7.1 x12.8 x0.3 mm, y1087, 10 pcs.

For adjusting the play of miscellaneous parts.Part is delivered in silver or black color from vendor!

€2.60*

y19047/02 O-rings for y19047

y19047_02 Size: for touring car shocks, y19047

Genuine HT spare/option part. Replacement o-rings for aluminum shock pistons no. y19047.Contents:4 pieces

€3.90*

y1017 MadMax MAXI PIN tires complete set for Traxxas X-MAXX 4x4 with adapter

Offerset:2 Pairs MadMax Maxi Pin tires2 Pairs MadMax rims2 Pairs MadMax inlays2 Pairs / 4 pieces adapter TT1020/01MAXI PIN 185 x 75 with black colored MadMax Extreme rims, 20-fold screwed, very tough, with 24 mm hex drive and with reinforced orange beadlock rings for Losi and HPI. The MadMax MAXI PIN tires come with strong special tire inserts which allow transferring the power without canting, even on heavy cars. MadMax MAXI PIN tire was developed specifically for astro turf tracks! The special tread design with 480 studs per tire provides excellent grip, but also a high load on tire and rim! To stabilize the tire, the outer shoulder features radial ribs which minimizes the tilting under load and counteract the shear forces during cornering. Furthermore, the MAXI PIN tire has studs positioned on the outside shoulder, which support the steering in corners. All together the MAXI PIN tires provide maximum grip, which made it necessary to upgrade the beadlock screws on these MadMax EXTREME wheels. So they come with 3.0 mm screws instead of the usual 2.5 mm ones! Nevertheless, tires and beadlocks should be checked after every run.The set consists of four tires, including tire inserts and MadMax EXTREME rims and 4 pieces adapter wheel nuts TT1020/01. Dimensions: Outer diameter: 185 mm tire width at bead: 70 mm Tread width: 75 mm Reinforced 24 mm hex wheel drive The video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!TT1020 Top Tuning Adapter wheel nutGenuine TopTuning spare/option part.These adapter nuts, manufactured from billet 7075 aluminum allow for easy and precise installation of all MadMax, HPI and Losi tires and rims on the Traxxas X-Maxx. For the best result possible, nut and adapter are manufactured as a one-piece unit.It should be noted that the wide rims can be used on the rear axle only. On the front axle they would limit the steering angle by grinding on lower a-arm and steering rod.Traxxas has microencapsulated the wheel shafts of the X-Maxx to secure the wheel nuts. Like any thread locking compound this is not for eternity. After several tire changes the use of a normal screw locking compound is advised, we recommend it "y0113 / 01 medium strength".The dimensions of the nut are specifically designed for use with MadMax, current HPI and Losi rims. Rims from Losi 5ive have slightly different dimensions in the hub area. This is meaningless on the large LOSI or HPI wheel adapters. With the smaller and shorter wheel nut thread of the X-Maxx wheel shafts you cannot compromise. Therefore there are also special nuts for the Losi rims/wheels available at our options menu.However, somewhere in the past, the injection moulds for the HPI rims were slightly modified in the hub area. As part of that job the bore diameter has probably been slightly increased. Therefore, the use of older rims in combination with the adapter nuts makes it necessary to increase the rim bore a little bit.Due to repeated requests for use: these wheel nuts replace the stock wheel nuts when installing the wheels!Contents:4 pieces

From €119.90*

Details

104782 HPI Bumper set Baja 5SC

Genuine HPI spare/option part. Contents:1 set

€32.89*

10478 FG Alloy damper reversing left/right - set

The set contains each one alloy damper reversing left and right.

€79.90*

10470 FG Front alloy uprights for F1

Front alloy upright for the Formula 1 models. CNC-cut, optimal fitting, non-twisting even by heat. Recommendable when mounting a disk brake.

€124.95*

104780 HPI Mud flap mount set Baja 5SC

Genuine HPI spare/option part. Contents:1 set

€16.48*

10475 FG Rear alloy upright for F1

Genuine FG spare/option part.Rear alloy upright for the Formula 1 models. CNC-cut, optimal fitting, non-twisting even by heat. Recommendable when mounting a disk brake.Contents:2 pieces

€105.95*

104781 HPI Rear hub carrier for Baja 5SC

Genuine HPI spare/option part. Seriously beef up your Baja suspension with this updated Rear Hub Carrier! This all-new one-piece rear hub that features adjustable rear toe inserts for extra race tuning!This is standard equipment on the Baja 5SC but will easily fit the Baja 5B, Baja 5B 2.0, Baja 5B SS and Baja 5T to dramatically increase the longevity and strength of your buggy or truck's drivetrain.These include extra-strong 9 mm thick dogbone driveshafts and the axles & outdrives to fit the dogbones.Contents:1 piece

€25.19*

34 products found for "y1047"

Filter products

rc-car-online - Home