11 products found for "y0744"

rc-car-online - Home

y0794 SPEED TEC EXPERT Zenoah G290 tuning engine

The SPEED TEC EXPERT genuine Zenoah G290 engine is optimized for performance with sophisticated craftsmanship and guarantees, besides greatly increased performance, excellent workmanship and stamina. SPEED TEC EXPERT version modifications: Cylinder: Adjustment of compression; enlarged ports, fuel management milled, machined and polished exhaust and intake. Piston: weight reduced; skirt shortened; oil rings, piston above and below piston ring tapered and piston dome ground. Crankshaft: is adjusted and aligned. Flywheel: weight reduced and checked for runout. Gaskets: use of premium quality gaskets.To achieve the optimum performance gain of a SPEED TEC EXPERT engine, we recommend the use of a tuned pipe ( to the tuned pipes ).

€649.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

y0244 Graupner/Spektrum Z590 Servo - 1pce.

Genuine Graupner/Spektrum Z590 servo, fully warranted.Torque 60 Ncm, speed 0,12 sec. dimensions 38 x 18,5 x 37 mm. Metal gears, ballraced.

€19.90*

y0743 Clutch-Safe 10 g, adhesive especially for clutch pads

Special single component epoxy adhesive for bonding clutch shoes; suitable for extreme operating temperatures (up to 200°C!) Important note for processing: For the final cure of the bond Clutch-Safe must be tempered at 170°C for 1 hour! (1 hour at 170°C in the oven!) The extremely high temperature load on the clutch shoes when used in off-road cars caused by increased clutch slippage, the shock of jumps and the combination with sometimes very high vehicle weights (up to 18 kg!) make bonding with Clutch-Safe highly recommended. For later removal/replacement of worn out clutch pads the clutch shoes must be heated as well.Attention:Clutch-Safe adhesive must be stored in the fridge! Content: 10g tube

Content: 10 Gramm (€495.00* / 1000 Gramm)

€4.95*

y0740 Replacement silicone exhaust hose for Losi 5ive-T Jetpro

Genuine HT spare/option part. Spare part for the Jetpro Losi 5ive-T tuned pipe.Measures:Inside diameter: 28 mm Outside diameter: 37 mmWall thickness: 4 mmLength : 46 mmContents:1 piece

€7.90*

y0714 Alloy pinion 19 tooth, hard anodized, for Carson/Smartech 1/6 scale offroad - 1pce.

Item N° y0714 Alloy pinion 19 tooth, hard anodized, for Carson/Smartech 1/6 scale offroad - 1pce.Very low weight hard anodized 19T alloy pinion, for use with the stock 48T spur gear on 1/6 scale 2WD off-road cars from Carson/Smartech/Nutech a.s.o.Diameter 31,6 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5

€27.90*

y0704 Smartech Monster Truck body shell, painted, 1 pce.

Painted body shell with decals.Die Karosserie passt auch auf Carson Comanche, Carson Stadium Racer, Stadium Truck, Bigfoot Race und Pickup Truck. Bei individueller Anpassung natürlich an nahezu allen 1:6er und auch vielen 1:8er RC-Cars!Measures:Wheelbase: 400 mmWith between the wheels: approx. 255 mmWith in the middle: approx. 235 mmWidth: ca. 250 mmTotal length: ca. 630 mmHeight: ca. 180 mm

€49.90*

y0744 Differential Silicone oil / grease, viscosity 15.000 untill 2.000.000, 50 ml

y0744 Viscosity: y0744/04 - 100.000+ 2.9EUR

For changing the locking effect of large scale car differentials.Top quality in 50 ml plastic wide-neck bottles.Silicone oil / grease with a viscosity to choose:15.00030.00050.000100.000300.0001.000.0002.000.000Viscosity of silicone oil at various temperatures.

Content: 50 Milliliter (€316.00* / 1000 Milliliter)

Variants from €12.90*

€15.80* €17.80* (11.24% saved)

y0741 Aluminum air filter adapter for Losi 5ive-T with velocity stack, 1 pce.

The aluminum air filter adapter replaces the plastic base plate with the same dimensions of a 5ive-T (not 2.0!) air filter. Its rigidity ensures a reliable seal to the carburetor. It will not warp; neither by high temperatures nor by tightening the mounting screws.This Venturi-insert/adapter prevents that unfiltered intake air perhaps comes into the engine!The additional velocity stack will simply be inserted into the cage for the inner filter foam. It conceals the mounting screws almost completely, providing excellent flow characteristics and improved performance.Comes complete with installation hardware and gaskets included.Scope of delivery1x Air filter adapter2x Countersunk screw 5x501x Carburetor gasket1x Air filter gasket

€39.90*

y0544 Sanding fleece Gold Microfine Pads, 100 x 80 mm

y0544 Grit: y0544/03 - 1500er grit, grey

Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:

€4.90*

ARA330744 ARRMA Composite Ball Cup Set for Kraton / Outcast 8S EXB

Genuine ARRMA spare/option part. Tough composite material for long-lasting durability in all conditions - Precision manufactured hardware mounting holes for fast and easy installation - Compatible with 8mm thick rear upper link and 7mm thick steering turnbucklesContents:1 set

€15.99*

Alloy engine mount, small, for Carson / Smartech 2WD ffroad cars, y0144 - 1pce.

Fits all 2WD Carson / Smartech largescale offroad cars.Will also fit GP buggy chassis "Big Pyro" from Reely.CNC machined alloy engine mount, direkt replacement for the stock plastic part, heat and tweak resistant. They come with all necessary hardware included.

€29.90*

11 products found for "y0744"

Filter products

rc-car-online - Home