y0543 Schneider Permanent Marker
€2.00
Available
Product information "y0543 Schneider Permanent Marker"
Schneider permanent marker, cap with clip and bullet tip. Dries quickly, water and wipe proof, black color.
Recommended for marking and contour tracing on body shells.
Lines can be easily removed with isopropyl alcohol or dry-cleaning naphtha.
Contents:
- 1 piece
Login
Accessories / Spare parts
Genuine HT spare/option part. Perfect surface preparation for paint jobs.Metal-free grinding fleece with a 1000, 1200 or a 1500 grit to roughen the inside of the body shell to improve paint adhesion. The flexible carrier of the fleece allows for a consistent, uniform contact with the work surface and makes it possible to prepare the polycarbonate to the smallest corner.Use it dry or wet when you rinse the body shell. The 1,500 grit (y0544//03) is especially recommended for metallic paint.Contents:5 pieces PadsPainting tips:
Customers also bought
Complete with mounting kit, side flaps and nuts & bolts. The rear wing comes unpainted (clear). Dimensions wing:Width: 280 mmDepth: 45 mmDimensions wing mounts:Height: 28 mmDimensions side flaps:Width: 50 mmHeight: 30 mmPainting tips:
Genuine FG spare/option part. Fits all touring cars and Porsche 530.( Not for Mini Cooper und Porsche 465/510.)Contents:1 piece
Genuine HT spare/option part.Ideal fo masking fine lines or patterns. Also suitable to get cleaner and more precise edges when masking large areas.Contents:1 piece / 33 meters
Content: 1000 Zentimeter (€0.80 / 100 Zentimeter)
Genuine FG spare/option part. Fits BMW 320si WTCC / Mini CooperDimensions:Length: 75 mmWidth: 365 mmContents:1 piece
Genuine HT spare/option part.This decal set is in the elasto version! Decal sets made from elasto film are substantially more durable and have a much more massive adhesive layer. Unfortunately, the elasto film has three times the price of the vinyl normally used for decal sets. Therefore the elasto decal sets have an approx. 30% higher price. And sorry, but the choice of elasto decal sets is still limited at the moment! Attention: Due to the special surface properties of TPE (elasto plastics), elasto decal sets are strongly recommended for TPE body shells. However, with the usual polycarbonate body shells the standard decals are sufficiently durable.Dimensions Jägermeister Logo:1 x 170 mm diameter1 x 90 mm diameter4 x 50 mm diameterDimensions Jägermeister lettering:1 x 250 mm width,4 x 210 mm width,1 x 130 mm width,2 x 60 mm width,Dimensions Dezent lettering4x 110 mm widthTotal dimensions:Width: 490 mmHeight: 420 mm
Customers also viewed
Original FG GT 360 body parts, without rear part !!! Scope of delivery and equipment see photos. Included in delivery are main part, front spoiler and rear spoiler. Rarity !!! for the 530 mm wheelbase Width 400 mm. Length 790 mm Height 220 mm
Team decal sheet, suitable for BMW 320si body shells with the order numbers: 8144 and 8144/01.Team decal sheet includes the following manufacturers: Hankook, Sonax, Castrol, EDGE, Zollner, Sonax, Akrapovic, Allgeier, H&R, GNB, Exide, BMW Bank. Dimensions:Big decal sheet: 510 x 200 mmM3 rear wing lettering: 250 x 36 mm
TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:
Content: 100 Milliliter (€135.50 / 1000 Milliliter)
Fits on 2WD and 4WD touring car chassis' with 535 mm wheelbase, FG, Carson C5 chassis and most other 1/5 touring cars with the same wheelbase. The body shell is vac-formed from 2 mm Lexan.Complete painted for 1/5 scale for 530/535 mm wheelbase. With rear wing and decals.Required body mounts:Mount front: FG 7020/15 Front bumper Rear body mount: FG 7152/01 Rear body mount Side body mount front: FG 8014 Body mounts Side body mount rear: FG 9014/01 Body mounts Contents:1 piece
The Set contains the front body, the main body, the rear body, the spoiler-set and the body screws. The body shell is vac-formed from 2 mm Lexan.The body shell does not come with drilled mounting holes to make it possible to fit any 1/5 car with 530/535 mm wheelbase. The set is delivered as shown.Required body mounts:Mount front: FG 7020/12 Front bumperRear body mount: FG 7152/01 Rear body mount Side body mount front: FG 7014 Body mountsSide body mount rear: FG 7014 Body mountsMeasures:Length: 890 mmWidth: 392 mmHeigth: 260 mmWheelbase: 530 mm