5702 Mielke special Teflon gasket for all Masterfix systems

€8.95*

Prices incl. VAT plus shipping costs

No longer available

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Product number: mielke_5702

EAN: 4058575046479

Product information "5702 Mielke special Teflon gasket for all Masterfix systems"

Special Teflon gasket, fits all Mielke Masterfix systems.

Dimensions:

Length: 19.4 mm
Inner diameter: 19.9 mm
Outer diameter: 24.7 mm

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Customers also bought

y0305 Colored flexible fuel line, top quality, 1 meter

y0305 Color: y0305/04 - Green

High quality flexible fuel line in your choice of blue, red, yellow, orange and green. Size:Length: approx. 1 meterOuter diameter: approx. 6.3 mmInner diameter: approx. 3.2 mmDiameters are 100% identical to the Zenoah Tygon hose #7352!

€5.90*

Mielke 5097/01 Extension spring for Steel-Power, 3 pcs.

Item N° Mielke 5097/1 Extension spring for Steel-Power, 3 pcs.Fits FG tuning pipes no. 6299/01 and 67298.

€6.50*

y1016/112 Complete Zenoah G320 sealing set

Set includes:y1016/005 Cylinder gasket G320RCy1016/007 Insulator gasket G320RCy1016/013 Crankcase gasket G320RC7332 Silencer gasket7337 Carburetor gasketUnit prices: 20,10 EUR

€12.90*

7333/02 FG Header gasket with heat shield for all Zenoah, CY, Fuelie and more

Genuine FG spare/option part.Fits Zenoah (G230, G240, G260, G270, G290, G320), Chung Yang (CY), Fuelie and HPI engines. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContenst:1 piece

€8.90*

TT0990 Top Tuning Failsafe with kill switch and status LED for all transmitters

Genuine TT spare/option part.The new and improved failsafe modul.This kill switch module works with most FM and 2.4 GHz rc-systems. Not compatible with AVC-equipped receivers! You must have a free channel on your rc-system in order to install the module! This means at least a 3-channel radio for standard 1-servo brake/throttle setups or a 4-channel radio for dual brake servos driven by the radio's mixer function. With this module you can stop the engine with your radio. Additionally the module features a failsafe function which stops the engine when the rx-battery's voltage drops below a certain level or the rc-system has a glitch. A kill switch module fulfils two tasks. On the one hand, as a safety device, it is intended to shut off an engine with magneto ignition in case of failure of the remote control, and on the other hand, the engine can be stopped at any time by remote control.While the latter is mainly used for convenience, the safety aspect is what really matters.The failsave circuit integrated in all modern remote controls may brake the vehicle in the event of a radio interference, but this feature is dependent on the basic functionality of the receiver system and its power supply. However, if the receiver, the gas servo or the power supply fails completely, the failsave of the remote control can no longer do its job. The vehicle may be running haywire at full throttle.In these cases, the kill switch will cut the ignition of the engine and the vehicle will roll out without power.Features:Ready to install no soldering requiredRemote LED for easy-to-spot operational status (ignition live/killed)Optically coupled to isolate the ignition from the radio systemThreshold value for undervoltage protection (4V, 5V, 6V) adjustable with jumpers allows adaptation to the rx-battery type (LiPo, LiFePo, NiMH, NiCd)Contents:1 piece

€47.90*

69241 FG Plastic servo retainer small

Genuine FG spare/option part. Dimensions:Length: 67 mmWidth: 20 mmHeight: 38.5 mmServo cutout: 42.7 x 28.7 mmContent:1 piece

€11.90*

Similar products

Mielke 5099 O-ring 20 x 3 mm , 2 pcs.

Genuine Mielke replacement part.Set with 2 viton o-rings to seal the Masterfix connector from manifold to pipe. Isolates the pipe from engine vibrations.O-ring fits Mielke plug systems and FG #6299. Dimensions:Inner diameter: 20 mmOuter diameter: 26 mmThickness: 3 mm

€3.90*

Mielke 5097/01 Extension spring for Steel-Power, 3 pcs.

Item N° Mielke 5097/1 Extension spring for Steel-Power, 3 pcs.Fits FG tuning pipes no. 6299/01 and 67298.

€6.50*

Mielke 5096 tuned pipe sealing set, 2 pcs.

Original Mielke sealing set for tuned pipes.

€9.90*

5090/01 Mielke Mounting for FG-EVO-Models, Set

Item-No.: 5090/1Mounting for FG EVO-Modelle, Set

€29.90*

Mielke 5500/1 Spare gaskets for Mielke 5500 Tornado-Power, set

Part number: Mielke 5500/1Spare gaskets for Mielke 5500 Tornado-Power, setFive o-rings plus one header gasketDimensions:Thickness: 2,5 mmInner diameter: 20 mm

€8.00*

Details