72 products found for "mec_1000_36_dot4"

rc-car-online - Home

1000-36/DOT4/DOT5 Mecatech o-ring

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Compatible with the DOT-4 brake fluid.Contents:4 pieces

€6.00*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

1000-34/DOT4/DOT5 Mecatech seal

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Compatible with the DOT4/DOT5brake fluid.Contents:1 piece

€5.50*

1000 DOT4/DOT5 Mecatech master brake cylinder right/left

Genuine Mecatech spare/option part. Fits right and left side respectively front and rear brakes.Contents:1 piece

€179.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

1000-05/DOT4/DOT5 Mecatech piston for master brake cylinder

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake. Assembled with seals.Note from Mecatech:A special tool is required for replacing the two seals on the piston. Therefore the seals are not available as separate spare parts.Contents:1 piece

€33.50*

1000-63 Mecatech conversion kit for using DOT4/DOT5 brake fluid

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Set with pistons and gaskets/seals, allows for the use of DOT4/DOT5 brake fluid.Contents:1 set

€111.00*

TT1000/04 Spare screws for electronic switch TT1000

Genuine Top Tuning spare/option part. Set with four screws each M2,5x12 and M2,5x16.Contents:8 pieces

€2.90*

1000-43, Mecatech t-connector, 1 pce

€14.90*

1000-62 DOT4/DOT5 Mecatech gasket for master brake cylinder cover

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Compatible with the DOT4/DOT5 brake fluid.Contents:2 pieces

€12.90*

1000-54 Mecatech brake line, 1 m

Genuine Mecatech spare/option part. Dimensions:Inner diameter: 2 mmOuter diameter: 4 mmContents:1 piece

€4.00*

y1000-54 Mecatech brake line, 1 m

Dimensions:Inner diameter: 2 mmOuter diameter: 4 mmContents:1 piece

€4.00*

ARA810000 ARRMA Circlip Pliers

Genuine ARRMA spare/option part. Contents:1 piece

€6.99*

671000 FG Leo Competition 2020.2 Expert 2WD

Special tuning parts in front: 67320 aluminum shock absorber long 67289 Aluminum front shock mount 67289/01 Shock mount board Special tuning parts rear: 67231 aluminum rear damper plate 67331 Big Bore Shocks 67332 Lower rear shock mount 67316 Big Bore springs soft 67317 Big Bore Springs hard The new off-road flagship from FG. The Leopard Competition Expert 2020.2, made of high-quality aluminium and carbon fibre components, is the winner of the first French championship, showing directly what this vehicle is capable of. The model comes with a 26cc engine, a central hydraulic brake, wheels and unpainted clear body. This buggy combines high performance with top driving characteristics and maximum reliability.The complete radio system and the servos (RTR!) are required for operation.The complete RTR equipment can be selected in our online shop options menu for a surcharge.The new benchmark for 2WD competition buggiesNew extended chassis with 580 mm wheelbaseMilled front chassis part to improve mass distributionSide chassis stiffeners made of T7075 alloy Newly developed tuned pipe systemNewly developed and weight-saving radio plateWinner of the first racing series of the French championshipDimensions:Length: 780 mm Width: 470 mmHeight: 330 mmWheelbase: 580 mmWeight: 10 kg

€2,490.00*

Configure now

1000-14 Mecatech 90° fitting, 1 pce.

€12.80*

1000-03 Mecatech pushrod, 1 pce.

Replacement part for Mecatech twin piston hydraulic brake.

€12.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

1000-02 Mecatech brake lever, 1 pce.

Replacement part for Mecatech twin piston hydraulic brake.

€12.90*

P-R-M 1000-40/01 Epoxy brake disk for Mecatech

PRM premium quality epoxy brake discs Material thickness is reduced for 0.1 mm to absorb tire debris or dirt easier!Dimensions: Outer diameter: 64 mmSocket size: 18 mm (square)Material thickness: 1,8 mm Suitable for:3002 Crosshydro hydraulic brake1001 Mecatech twin piston hydraulic brakeContent:2 Pieces

€22.90*

1000-51-R Mecatech adapter plates rear, 2 pcs.

Replacement part for Mecatech twin piston hydraulic brake. The plate has a thickness of 2,7 mm.

€42.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

1000-53 Mecatech brake fluid, 50 ml

Genuine Mecatech spare/option part. Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50 ml

€8.90*

y1000-53 Mecatech brake fluid, 50 ml

Replacement part for Mecatech twin piston hydraulic brake.Contents:1 piece / 50 ml

€8.90*

10000E FG Formel 1 Sportsline Electric

The FG Sportsline Formula 1 electric convinces not only by its appearance, but rather by its technical achievements. The unique details such as push rods, horizontal oil pressure shock absorbers, double wishbone and much more can be found in almost no other model.The chassis is built on a high-strength 5mm aluminum chassis plate and thus offers extreme stability. Countersunk holes in the chassis plate allow the screws to be flush, ensuring a flat surface under the model. Versatile adjustment options on the front and rear axles allow the model to be perfectly adapted to your own needs. Adjustments such as camber, caster, etc. are no problem whatsoever, even for beginners, and are made via the double a-arms, which provide maximum stability at the rear axle by means of additional track rods. Also the adjustable aluminum oil filled shock absorbers convince on full length and offer maximum performance even on a very difficult underground. The above mentioned push-rod suspension enables play-free power transfer from the suspension to the shock absorbers, which is essential for precise driving.The factory-mounted combination of 980KV motor and 160A MAX6 esc provides performance that is second to none. With a 6S 22.2V (4S 14.8V is also possible) LiPo batteries, the motor reaches a final speed of about 25,000 rpm, leaving a comparable combustion engine far behind. The braking is done by the 980KV motor and is very strong. Within a few meters the model comes from top speed to a standstill. Those who have searched in vain for reverse gear with a combustion engine will find it with the electric version. The operation is very easy, if you press the brake lever once, you hit the brakes. If you press the brake lever twice, you shift into reverse. With the help of a programming card (available separately) you can adjust all ESC values according to your needs. This includes setting options for power, brake force, low-voltage protection and much more. Furthermore, the model has the following technical: Features: 160A MAX6 esc, 6S compatible (4S also possible) 980KV brushless motor Waterproof components Adjustable aluminum oil filled shock absorbers Aluminum levers for the shocks Aerodynamic Lexan body shell 5mm thick aluminum chassis plate Mounting compartment for steering servo Mounting compartment for separate brake servo (for mechanical/hydraulic brakes) Cogged belt drive Side battery mounts for optimal weight distribution Custom CNC machined motor mount Unique double a-arms Push rod suspension Treaded F1 tires Tuning ball drive shafts Dimensions: Length: 960 mm BrWidtheite: 440 mm Height: 230 mm Wheelbase: 620 mm Technical data 980KV brushless motor: Max. Voltage: 33V Max. Current: 130A Max. Speed: 30.000RPM Power in watts: 4250W Rotor poles: 4 No-load current: 2.8A Resistance: 0.0128 Length: 82mm Diameter: 55 / 58mm with fins Weight: 880g Shaft diameter: 8mm Free shaft length: 30mm Weight: 880g Technical data Max6 esc: Continuous current: 160A Peak current: 1050A Battery: 3S - 8S LiPo or 9-24 cells NiMH BEC: 6V/7,2V - 3A/6A Abmessungen:70x56x46,5mm Weight: 240g Note: In our online shop you can also find a detailed 360° illustration, where especially the technology of the FG Formula1 electric chassis can be seen.Note battery mounting:When mounting the l/h side LiPo battery, you must always make sure that it does not rub against the drive pulley. For this purpose, a 5 mm thick piece of foam mat or something similar between battery and battery holder is sufficient to ensure an appropriate distance. For driving you still need: 2 drive batteries incl. charger Battery dimensions maximum: Length 143 mm/5,6 Width 48 mm/1,9 Height 40 mm/1,6 Connector EC8 The RTR equipment (remote control and steering servo!) The body shell comes unpainted! In our online store you can use our store configurator (shopping cart selection / options menu) to add the desired parts, as well as the completely painted body. Here at our Ebay offer selectable: RTR equipment (remote control and steering servo) fully assembled! Painted body shell incl. decals Formular 1 models in action!

€1,348.95*

Configure now