HURRAX extreme Race tire and insert 175x70 mm

HURRAX extreme is one of the most successful tire in large scale off-road racing and specifically designed for astro turf and solid ground. With more than 700 (!) differently designed, closely spaced lugs and the 70 mm wide tread it is reasonably wear resistant and provides optimal grip with good side traction.

If this - i.e. on the front axle - is not desired, you may cut the lugs at the tire’s outer edge to reduce cornering grip. This can be easily done with a small side cutter or strong nail scissors.

In order to reduce the edging in the tire on the front axle.

This makes a tire less aggressive during cornering and changes the car’s behavior towards understeer. It becomes – depending on the track conditions (i.e. wet!) a lot more drivable.

An optimal vehicle setup can often be achieved by running already used HURRAX extreme tires on the front and new ones on the rear axle.
This is especially true for 2WD models.

Dimensions:

• External diameter approx. 175 mm
• Inner diameter approx. 130 mm
• Width approx. 70 mm
• Weight: one glued tire on Hurrax rim: 470 grams

Due to the high torque load on the bonding of tires on largescale cars, checking the bonding from time to time and re-glueing (y0067) if necessary is unavoidable.

---

GRP off-road disc rim for tires with approx, 132 mm inner diameter.

The closed disc rim features reinforcement ribs on the backside and a protective collar around the wheel nut seat.

Dimensions:

• for tires with an inner diameter of approx. 132 mm and approx. 70 mm width
  and an outer diameter of approx. 180 mm (like i.e. GRP / Gandini tires)
• Weight approx. 172 gramms