7432/27 FG Primary gears 35 teeth

€32.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_7432_27

EAN: 3410569715500

Product information "7432/27 FG Primary gears 35 teeth"

Genuine FG spare/option part.

Clutch	Gear shaft outer	Gear shaft inner	Differential	Reduction ratio
34	58	23	73	5,41
34	58	23	74	5,49
34	58	24	73	5,19
34	58	24	74	5,26
35	58	23	73	5,26
35	58	23	74	5,33
35	58	24	73	5,04
35	58	24	74	5,11
36	58	23	73	5,11
36	58	23	74	5,18
36	58	24	73	4,90
36	58	24	74	4,97
37	58	23	73	4,98
37	58	23	74	5,04
37	58	24	73	4,77
37	58	24	74	4,84

Contents:

1 piece

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

6048 FG Steel gearwheel big 48 teeth

Genuine FG spare/option part. Differential spur gear for all FG street cars except Formula 1. Can also be used as a main spur gear on the layshaft on monster models when mounted on alloy gear carrier y0190.Dimensions:Outer diameter: 75 mmWidth: 7.5 mmBore: 45 mmModule: m=1,5Contents:1 piece

€53.90*

y1426 HT aluminum gear carrier -on-road- with steel spur gear for the layshaft

Fits FG and Smartech touring cars. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of pinion and spur gear carrier are pointing to the outside of the car. The carrier features M8 grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions. The following measures are required for installation of the HT-steel gear adapter "on-road" on the layshaft in FG EVO 2020 cars:- The installed wide 16T layshaft pinion 6431/01 must be replaced by the narrow version 6431.- The supplied 1mm shim must be added between layshaft pinion and ball bearing.- The flat sections on the layshaft do not have the usual 180° offset for the adapter; therefore only one grub screw will be used. However, since this is a wide face M8 version, this is no disadvantage.

€69.90*

Configure now

y0119 Steel pinion 16 teeth

Steel pinion 16 teeth suitable for 46 mm main gear for FG models.Modul 1,5

€29.90*

y0191 HT-Steel spur gear 46 teeth

Fits the y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaftInner diameter and bolt pattern are the same as a standard FG differential spur gear.Module: m=1,5Content:1 piece

€49.90*

y0692 HT-Gearset for layshaft and differential fine pitch for 1/5 onroad

Genuine HT spare/option part.Fine pitch gears for layshaft and differential, for competition use in touring car and GT models only. The gears run smoother and quieter than the stock parts, reducing the car's rolling resistance.Module: m=1Fits FG and Smartech / Carson cars. Only for use as a set, not in combination with standard pitch gears!Contents:2 pieces

€79.90*

6493 FG Steel spur gear 48T with adapter

Genuine FG spare/option part. Hardened steel gearwheels for the gears of the 1/6 off-road models.Module: m=1,5Contents:1 set

€84.95*

6492 FG Steel spur gear 46T with adapter - set

Hardened steel spur gear for FG 1/6 off-road models, spur gear diameter 72 mm.Module: m=1,5

€84.90*

32452 Gear 1 - 1pce.

cs_32452 Quality: nitrided+ 8.7EUR

Differential spur gear 48T for Carson / Smartech 2WD cars.Module: m=1,5

€53.60*

y0190/46 HT-Alloy carrier with steel spur gear 46T for the layshaft

This carriers makes it possible to run steel spur gears on the layshaft. Pebbles heat and the high torque of monster truck applications are no longer a problem.The carrier is designed for reverse installation as seen on the FG EVO car, where the hubs of the pinion and the spur gear carrier are pointing to the outside of the car. The carrier features M8 (eight, no typo) grub screws for installation on the layshaft. This means that the tip of the screw is as wide as the flat area on the shaft and ensures best possible load distribution.

€89.90*

6493/01 FG Steel spur gear 48T - 1 pce.

Item N° 6493/01 Steel spur gear 48T - 1 pce.Outer diameter: 75 mmInner diameter: 26 mmBolt circle: 3 x 35 mmWidth: 10 mmModule: m=1.5

€56.70*

6491 FG Steel spur gear 44T with adapter - set

Hardened steel gearwheels for the gears of the 1/6 off-road models.Module: m=1,5

€79.99*

y1427 HT steel spur gear on-road with 39, 40, 41 teeth

y1427 Version: y1427/40 HT steel spur gear

Fits FG and Smartech touring cars in combination with HT aluminum layshaft spur gear carrier on-road y1428. The use of steel spur gears on the layshaft increases reliability significantly. Pebbles, heat and shock loads created by high rev clutches are no longer a problem. The spur gears feature the same diameter as the FG plastic versions. The use of a steel clutch pinion is mandatory with steel spur gears! The spur gears are available as 39T, 40T or 41T versions

€49.90*