12 products found for "fg_7424"

rc-car-online - Home

7424 FG Plastic gearwheel 38 teeth

Genuine FG spare/option part.Suitable for all 1:5 models. Requires gear carrier 7423.Dimensions:Diameter: 60 mmWidth: 15,5 mmTooth width: 12 mmModule: m=1,5Contents:1 piece

€17.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

7424/01 FG Plastic gearwheel 38 teeth 2-speed, 1 pce.

Genuine FG spare/option part.Suitable for all 1:5 models with 2-speed gear. Gear adapter: 7456/01 Alloy hub A 47mm and pinion: 7433 Steel gearwheel hardened 26 teeth are required for this spur gear.Diameter 60 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5

€17.90*

7422 FG Gear wheel protect for 38/40/42 teeth - set

Gearwheel protection in transpartent polycarbonate for all FG 1:5 scale models with the gear wheels 38, 40, 42 teeth. Protects the driving gear wheels almost from dirt, sand and stones. We recommend the mounting when driving on car parks. Not suitable for Formel 1, Leopard 2 + 4 Competition, Competition and Competition Evolution models.

€39.50*

7428 FG Plastic gearwheel 24 teeth - 1pce.

Suitable for all 1:5 models.Diameter 39 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Please pay attention that plastic pinions with two opposite flat spots cannot be used on clutch bells with 90° angle pinion shaft. Then you need a .

€7.40*

Details

7429 FG Plastic gearwheel 41 teeth - 1pce.

Suitable for all 1:5 models. With 63 mm diameter.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€17.90*

7474 FG Alloy gear plate 97 for 2WD and 4WD

Genuine FG spare/option part. Suitable for all FG 1:5 and 1:6 2WD and 4WD models. Best fitting of ball bearing seat and distance of gear shaft, non-twisting. To mount this gear plate into the models Marder, Beetle, Beetle On-Road, Pajero and Monster the rear brake 7040/01 is needed.Bearing seatsClutch bell: 22 x 6 mmLayshaft: 19 x 7 mmContent:1 piece

€99.90*

7427 FG Plastic gearwheel 40 teeth

Genuine FG spare/option part.Suitable for all 1:5 models.Dimensions:Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Contents:1 piece

€17.90*

4424 FG Threaded rod M4 x 25 mm

Genuine FG spare/option part. Multipurpose M4 threaded. For track rods, steering rods a.s.o. According to the application cutting may be required.Contents:2 pieces

€9.70*

7423 FG Plastic gear carrier 47mm - 1pce.

Suitable for .

€11.70*

7426 FG Plastic gearwheel 26 teeth - 1pce.

Suitable for all 1:5 models.Diameter 42 mmBore 10 mmTotal width 18 mmTooth width 11.5 mmModule m=1.5Please pay attention that plastic pinions with two opposite flat spots cannot be used on clutch bells with 90° angle pinion shaft. Then you need a .

€7.70*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

7425 FG Plastic gearwheel 39 teeth - 1pce.

Suitable for all 1:5 models.Diameter 63 mmWidth 15.5 mmTooth width 12 mmModule: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involutes? curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn?t really matter.

€17.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

87424 HPI Brake disk rotor Baja 5B

Genuine HPI spare/option part. Contents:2 pieces

€3.09*

12 products found for "fg_7424"

Filter products

rc-car-online - Home