21 products found for "fg_7201"

rc-car-online - Home

7201 FG Alloy shock absorber 04 medium-short - 2pcs.

The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16mm. Suitable for all damper springs with approx. 17mm inside diameter .With 115 mm hole distance.

€74.70*

7201/01 FG Damper housing 04 medium - 1pce.

Suitable for .

€25.90*

7201/04 FG Lower shock absorber seal 04 - 2pcs.

Suitable for .

€13.10*

7201/6, FG Damper spring front, 2 pcs.

Mount these damper springs on the damper piston rod in order to prevent a penetration of the shock absorber. Suitable for all shock absorbers with a 4mm piston rod.Inner diameter 5.7 mmWire diameter 1.6 mmLength 11 mm

€5.90*

7201/02 FG Upper shock absorber seal 04 - 2pcs.

Suitable for .Bushings for 4 mm shock mounts.

€18.90*

7201/05 FG Guiding set

Suitable for shocks with the FG order number: 7200, 7201, 7202, 7203, 7204.Dimensions (with flange):Inner diameter 4 mmOuter diameter 6 mmFlange diameter 8 mmWidth 2,5 mmDimensions (without flange):Outer diameter 7,7 mmWidth 1,6 mmContents:8 bushings with flange2 bushings without flange

€6.90*

7701 FG Crankcase A and B

Genuine FG spare/option part.For Zenoah G240/270/290Contents:1 set

€98.50*

7207 FG Front bulkhead crossmember

Genuine FG spare/option part. Content:1 piece

€21.90*

7203 FG alloy shock absorber 04 medium- 2pcs.

€72.50*

7206 FG Damper Evo 2020

Genuine FG spare/option part. Contents:2 pieces

€107.95*

7210 FG Damper spring short front - 6pcs.

The contains each 2 of the following damper springs:- - - Suitable for , , , and .These new off-road damper springs allow an exacter accommodation of the model on different grounds.Fits shock absorbers with an outside diam. of 16mm.Outer diameter of spring 21 mm

€25.80*

7101 FG Front axle support - 1pce.

Riser plate for the front end of 1/5 touring cars and race trucks with plastic front suspension.Raises the front bulkhead 13 mm over the rear one.

€8.90*

7204 FG alloy shock absorber 04 long

Genuine FG spare/option part.The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter. Installation length Extended: 139 mmTravel: 38 mmContents:2 pieces

€69.90*

7202 FG alloy shock absorber 04 medium-long - 2pcs.

The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber 2004 has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter.Installation length extended 129 mmTravel 38 mm

€73.90*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

7901 FG Electric engine 910KV Brushless

Genuine FG spare/option part. Powerful brushless engine, high torque, sintered neodymium magnets, hand-wound long working life.Adapter bushing FG # 66514 is required for installation of steel pinions with 10 mm bore diameter. Suitable for 1/6 buggy / monster / street cars.Technical data:4.250W 33V Maxi: 130ARPM maxi: 30.000 rpmKV: 910 KVAbmessungen: 82 x 58 mmAchse: 30 x 8mmGewicht: 840gContent:1 piece

€259.95*

7200 FG alloy shock absorber 04 short

Genuine FG spare/option part. The alloy housing has an outside thread to adjust the damper spring. The upper alloy shock absorber seal is equipped with a ventilation boring which makes the refilling if the damper easier. Completely new is the lower shock absorber seal with the plastic guiding bushes for the damper piston rod and for an easier chaning of the o-rings. The alloy adjusting ring has a socket for the spring collet and an adjusting mark. The shock absorber has an diameter of approx. 16 mm. Suitable for all damper springs with approx. 17 mm inside diameter .With 110 mm hole distance.Contents:2 pieces

€74.90*