66223, FG Plastic bearing carrier 4WD

€5.50*

Prices incl. VAT plus shipping costs

Available

Product number: fg_66223

EAN: 3410564530382

Product information "66223, FG Plastic bearing carrier 4WD"

Genuine FG spare/option part.

Contents:

2 pieces

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

66245 FG Steel ball 7 mm

Genuine FG spare/option part. Bore 3 mm.Contents:4 pieces

€8.50*

66207, FG Plastic cog belt pulley, rear 42T. 4WD

Genuine FG spare/option part.Contents:1 piece

€23.90*

66237/01 FG Gilmer belt 15mm, 530/535 long, 1 pce.

Item N° 66237/01 Gilmer belt 15mm, for Leopard 4WD 530, Offroad 4WD 535 and Sportline TW 4WD 535, 1 pce.

€49.95*

66211 FG Gear cover 4WD

Genuine FG spare/option part. Contents:1 piece

€7.50*

66244/01 FG Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.

Item N° 66244/01 Ball-and-socket joint 7mm f.M4, 30mm for Leopard 2WD/4WD, 8pcs.Spare part for the Leopard 2010 2WD/4WD version

€6.50*

66217 FG Steel pinion 14T narrow, 1pce.

Item N° 66217 Steel pinion 14T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter, tooth width 9.25 mm, total width 15.6 mm, outer diameter 25.7 mm.Module: m=1,5Profile regraded, this means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn't really matter.

€29.95*

66210 FG Rear axle cover 4WD

Genuine FG spare/option part. Contents:1 piece

€11.30*

66267 FG Turnbuckle M10/M8x66mm, 2WD/4WD, 2 pcs.

M8 r/h thread / M10 l/h threadFor older 2WD models that are not based on the 4WD models, please refer to Sportsline 2008. or if an RC plate is no longer fitted, check Sportsline 13 in Parts Scout.There you will find the right spare parts for your vehicle.

€19.90*

66250/01, FG Bracket f. stabilizer bar front 2WD/4WD, 2 pcs.

€3.50*

66254, FG Axle shaft 6x50mm 4WD, 1 pce.

€4.50*

66217/01 FG Steel pinion 15T narrow, 1pce.

Item N° 66217/01 Steel pinion 15T narrow, 1pce.Layshaft pinion for FG 4WD cars, 10 mm bore diameter.Module: m=1,5

€29.95*

66266, FG Alloy a-arm, front upper 4WD, 1 pce.

Alternative: y2002 Alloy a-arm, front upper FG 4WD - Fits FG Leopard 4WD und Sportsline onroad 4WD with 510mm wheelbase.Does not fit FG Leopard 2WD und Sportsline onroad 4WD with 530mm wheelbase.

€41.30*

Customers also viewed

67239 FG Aluminium servo saver bridge Leopard 4WD, 1pce.

Item N° 67239 Aluminium servo saver bridge Leopard 4WD, 1pce.Spare part for the Leopard 2010 4WD version

€11.90*

Details

6072/01 FG Rear lower wishbone adjustable for 1:6

Genuine FG spare/option part. Contents:1 piece

€19.90*

6000c/2023 FG Marder Vintage-Classic with 26 ccm engine RTR, incl. Car Bag !

With complete RTR equipment y1382 Original Maxi-Pin 1/6 offroad competition tire The legendary 1/6 FG Marder 2WD Off Road Buggy! For many years the ideal entry into the elite class of radio controlled cars! The large-scale car with tough 26 cc engine is operated with normal 2-stroke gas. A 800 cc tank gives almost an hour of driving fun! For the FG Marder theres a wealth of option parts, most of them are not exactly a must, but make infinitely more fun! The FG Marder comes with completely installed remote control. Just fuel up, start the engine and drive off.Features:The model is built on an angled 4 mm chassis plate. All screws on the bottom are countersunk with no protruding heads. Double a-arms front and rear axle with 4 high volume oil-filled shock absorbers ensure optimum traction.All rotating parts are supported by ball bearings. Secondary spur gears, bevel gears inside the differential and all drivetrain parts are case-hardened. Rocker panels protect the car against contamination from below. The model is equipped with a powerful 26 cc engine. It needs a regular 2-stroke petrol/oil mix (available at every gas station). The integrated pull starter allows for easy engine starts without additional equipment.Dimensions: Length: 690 mm Width: 420 mm Height: 270 mm Wheelbase: 475 mm

€899.90* €1,049.95* (14.29% saved)

6000CZ30 FG Marder 2WD Legend 30 Years - limited and numbered special edition

To celebrate the 30th anniversary of the legendary Marder 1/6 scale 2WD buggy, FG Modellsport/T2M releases a special edition, limited to 300 numbered pieces, with the original signature of Franz Gröschl on the sticker sheet as well as a top equipment (G260RC Zenoah engine, hi-capacity low friction aluminum shock absorbers and special aluminum engine mounts). with original 260 Zenoah with Low-Friction Alu shocks with alloy enginemount The Models is built on a 4 mm u-bended chassis. All borings of the lower side are countersunk, therefore the screw heads can't bear out.Double wishbones at font and rear axle as well as 4 bulk oil-pressure shock absorbers guarantee perfect ground adherence. All rotating parts are supported by ball-bearings. Rear gear wheels, differential gears and all driving elements are case-hardened. The side guards protect the model from dirt. With original signature of Franz Gröschl. The model is equipped with a powerfull 26 ccm engine which runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank filling of 0,7 liters enables you to drive about 45 minutes. The engine can be started without difficulties through the integrated pull-start. To complete the models all merchantable servos and radio control systems are suitable.You can select the car with complete RTR-equipment from the options menu. RTR-equipment RTR = Ready to Run. The RTR version comes ready to use with the 2,4 GHz rc-system already installed. Transmitter 2,4 GHzReceiverHigh power servo for throttle and brakeLargescale servo for steeringTx-battery, rx-battery

€799.99*

Configure now