19 products found for "fg_6080"

rc-car-online - Home

6080 FG Rear dogbone

Genuine FG spare/option part. Replacement drive shaft (dogbone). Long Version.Suitable for BMW GTR, Mercedes CLK-GTR, Race-Trucks, C291, Porsche GT1, GT2, GT3 and all FG Off-Road models.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 101,5 mmContents:1 piece

€17.90*

6050 FG Plastic gear carrier 60 mm

Genuine FG spare/option part. Plastic version, 60 mm diameter. For 48T - 46T spur gears.Also available in aluminum .Content:1 piece

€12.50*

6080/01 FG Ball drive shaft rear 96,5 mm

Genuine FG spare/option part. Same applications as 6080, just for ball drive system!Dimensions:Shaft diameter: 6,5 mmBall diameter: 12 mmLength: 96,5 mmContents:1 piece

€19.95*

6089 FG Shock piston 2-hole

Genuine FG spare/option part. Spare part for 6083, 6084, 6481 and 6482. Diameter 14.75 mm, bore for 4 mm shock shaft. Contents:2 pieces

€5.50*

6088 FG Lower shock plug A+B

Genuine FG spare/option part. Spare part for 6083 and 6084. Contents:2 pieces

€7.90*

6085 FG Front shock absorber body

Genuine FG spare/option part. Spare part for 6084.Dimensions:Length: 46 mmDiameter: 20 mmContents:1 piece

€14.95*

6081 FG Steel ball Ø4mm 10x15 mm

Genuine FG spare/option part. Ball joint with 4mm bore suitable for all FG plastic ball-and-socket jointsContents:4 pieces

€13.10*

6040 FG Ceramic ball bearings 10x22x6 mm

Genuine FG spare/option part. Why ceramic? Besides corrosion and wear resistance ceramic balls are smoother and have a better shape stability; resulting in less drag from the bearing itself.Are used in all FG and Carson models for bearing the clutch bell.Contents:2 pieces

€23.90*

6020 FG Collet 2,1 mm

Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces

€5.95*

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

6070 FG Bevel diff. gearwheel A/B reinforced

Genuine FG spare/option part. Reinforced bevel differential gear wheels.Contents:1 set

€87.90*

6087 FG Upper shock plug

Genuine FG spare/option part. Spare part for 6083 and 6084. Mounting hole for 4 mm bolt.Contents:2 pieces

€6.90*

6086 FG Rear shock absorber body

Genuine FG spare/option part. Spare part for 6083.Dimensions:Lenght: 58 mmDiameter: 20 mmContents:1 piece

€15.95*

6180 FG Roll bar for Big Foot

Genuine FG spare/option part.This roll bar is just for looks, not for protection. It consists of aluminum tubes and plastic corner joints.Fits monster truck body shells.Dimensions double loop:Height: approx. 100 mmWide: approx. 230 mmDimensions kickers section:Length: approx. 190 mmWidth: approx. 120 mmContents:1 set

€29.30*

7080 FG Rear dogbone 90 mm

Genuine FG spare/option part. Standard driveshaft, short version.Fits FG Audi, BMW 320, Peugeot 307, Renault Megane und VW New Beetle.Dimensions:Shaft diameter: 7 mmBall diameter: 10 mmLength: 90 mmContents:1 piece

€22.50*

6060 FG Spoiler ABS for 1:6 Off-Road - 1pce.

€0.00*

Details

6030 FG Steel ball 10x10,75 mm

Genuine FG spare/option part. Steel ball with 4 mm bore.Contents:4 pieces

€12.90*

6084 FG Front shock absorber

Genuine FG spare/option part. Suitable on the front axle for all FG 1:6 buggy models.Dimensions:Mounting hole distance: 113 mmTravel: 26 mmDiameter: 20 mmFG factory fill is viscosity 2000 for Marder & Co. and 1000 for stadium / monster cars.RecommendationMarder & Co.: during winter viscosity 1000 - 1500, 1500 - 2000 for summerMonster / Stadium: For offroad use in the winter viscosity 700 - 900, for summer 900 - 1500; use a slightly higher viscosity for on-road useContents:1 piece

€20.60*

6082 FG Gearwheel cover

Genuine FG spare/option part.Suitable for all FG Off-Road chassis 2 WD except Leopard.Protects the differential spur gear.Contents:1 piece

€9.50*

GPM 6080/01 Ball driveshaft for 96,5 mm FG cars, 1 pce.

Fits all FG offroad / monster and stadium models (except Leopard 2010 up). Also for FG Formula 1 and Race Truck models. The GPM drive parts are made of high quality spring steel and due to its elasticity provide high impact resistance and extreme stability. Ground bearing seats ensure maximum accuracy of fit. Ball drives run significantly smoother and with less wear than normal dog bones with pins. The GPM ball drives can be partially mixed with FG parts. The heads of the GPM driveshafts fit into FG differential cups or wheel shafts.The opposite combination, i.e. FG shafts in GPM differential cups or wheel shafts does not always fit. We had tests where some FG shafts fit neatly, but due to slight tolerances others who did not fit into the very same cups/shafts. For this combination, we can not guarantee compatibility! Dimensions: Length 96.5 mm

From €19.90*

Details

19 products found for "fg_6080"

Filter products

rc-car-online - Home