5019/01 FG Pressure spring 0,4x5x30 mm
€4.90
Available
Product information "5019/01 FG Pressure spring 0,4x5x30 mm"
Suitable for all throttle rods.
Contents:
- 2 pieces
Login
Customers also bought
Item N° 8418 Foam front bumper 1:5 - setThe foam of this bumper set can be easily removed upwards through dismounting the body clips. Suitable for all 1:5 models. The foam can be adapted to all front bodies through cutting.Length: 110 mmWidth: 410 mmHeight: 55 mm
Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces
This pair of Tyres have the following use indications: VERY HIGH GRIP situation for very clean track. VERY HIGH GRIP situation for big asphalt. VERY HIGH GRIP situation for very high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!
This pair of Tyres have the following use indications: HIGH GRIP situation for clean track. HIGH GRIP situation for big asphalt. HIGH GRIP situation for high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!
Genuine HT spare/option part. Especially for CY / Zenoah G230/240/260/270/290/320, HPI and Losi engines.Can be used for removal of the standard clutch as well!Contents:1 piece
Genuine HT spare/option part. Ball & socket tool with t-handle, especially for installation and removal of balls in FG or Smartech/Carson cars' plastic a-arms and steering rod ball joints.Contents:1 piece
Customers also viewed
Genuine FG spare/option part. Necessary for all throttle and brake linkages.Dimensions:Outer diameter: 7 mmWidth: 5 mmContents:5 pieces
Item N° 6534/02 Throttle pivot post 3.1mm - setRevised set for 2 mm linkages, but with 3.1 mm pivot bore to prevent linkage seizing. Can be used for throttle or brake applications.Set collars have 2.1 mm inner diameter.
Genuine FG spare/option part. Plastic radio plate for installation of up to 4 servos. Fits all FG street models (except Formula 1) and Leopard models.You will need FG #6118/05 for installation of any steering servo other than Hitec 805BB.Contents:1 piece
Genuine FG spare/option part. Standard plastic wishbone for all 2WD FG off road models except Leopard race and monster/stadium models with dual shock axles.Contents:1 piece
Original FG Ersatz-/Tuningteil.Well-priced but still effective plastic diff. cover. Stones can damage metal covers and it is difficult to removethem. According to the flexible plastic material an impressing becomes hardly possible. If it still happens the cover can be easily removed through cutting with a knife or a scissors.Dimensions:Length: 43 mmDiameter: 45 mmFlange diameter: 65 mmInhalt:1 Stück
Genuine HT spare/option part. Especially for CY / Zenoah G230/240/260/270/290/320, HPI and Losi engines.Can be used for removal of the standard clutch as well!Contents:1 piece
High performance two-stroke engine oil made of synthetic base oil. For high performance off-road motorcycles. Provides for clean combustion. Premix and oil injected engine use.Synthetic Blend 2-stroke engine oilExcellent combination of selected basis oils and adjsuted additives.Ensures also at extreme loads a secure lubrication and a low fuming combustion.Reduces deposits in the combustion hamber, at piston and piston rings, in the outflow channels and exhaust system and ensures clean spark plugs.Low wear and good corrosion presentationContrary to Panolin's description FG recommend a 3%-4% ratio of mixture for rc-car applications.