4151 FG Audi A4 DTM front air dam
€57.00
Available
Product information "4151 FG Audi A4 DTM front air dam"
Unpainted spare part.
Contents:
- 1 piece
Login
Customers also bought
Genuine FG spare/option part. Fits Audi A4 and BMW ALMS body shell.Not suitable for BMW M3 ALMS Superstar.Dimensions:Length: 107 mmWidth: 387 mmContents:1 piece
Genuine FG spare/option part. The set includes two pieces of white flaps with screws.Fits body shells 4149 and 4149_01.Contents:1 set
Genuine FG spare/option part.The set includes rear wing. Fits body shells 4149 and 4149/01.Contents:1 setPainting tips:
TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:
Content: 100 Milliliter (€111.90 / 1000 Milliliter)
TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:
Content: 100 Milliliter (€111.90 / 1000 Milliliter)
TAMIYA PS = Polycarbonate spray paints are specially developed for painting unpainted kit body shells. Numerous colour shades are available and allow the individual design of models. Each can contains 100 ml of highly opaque paint, which is oil and fuel resistant, allowing the use on nitro models.The body shell should be degreased and cleaned before use. Best painting results are achieved when thin layers of paint are sprayed on from a distance of approx. 30 cm. Between two spraying processes the paint should dry slightly to avoid "tears".Always follow the painting instructions of models and on the can. Danger warnings: H222 Extremely flammable aerosol. H229 Container is under pressure: may burst when heated. H315 Causes skin irritation. H318 Causes severe eye damage. H335 May cause respiratory irritation. H336 May cause drowsiness and dizziness. EUH066 Repeated exposure may cause skin dryness or cracking. Content: 100 ml spray can with spray headPainting tips:
Content: 100 Milliliter (€113.90 / 1000 Milliliter)
Customers also viewed
Genuine FG spare/option part.The set includes rear wing. Fits body shells 4149 and 4149/01.Contents:1 setPainting tips:
The competition tuned pipe system for HPI-Baja 5B 2.0 and Baja SS and Carson Wild Attack cars from the top manufacturer for high performances exhaust systems and current 1/5 World and European champion SAMBA!Complete set with flexible (spring) connection between manifold and pipe and mounting hardware for bracing against the HPI Baja's roll cage.For engines from 26cc to 32cc, improves torque and top speed!Complete set with manifold, slip-fit connector with hose and spring and installation hardware.
This pair of Tyres have the following use indications: VERY HIGH GRIP situation for very clean track. VERY HIGH GRIP situation for big asphalt. VERY HIGH GRIP situation for very high temperatures. This pair of Tyres have the following technical features: REVO treated profile for the maximum traction and the maximum lateral grip. Treated profile studied to maintain the tyre surface alway clean from rubber murble. Compound exclusively developped for model tyres. Inside belt flexible but very strong, vulcanized directly together with tyre compound. Insert foam with special material for high temperatures, for maximum stability and high drive precision. Spoked wheel moulded with special material for high temperatures for maximum grip and stability. Special gluing system 100% guaranteed.The main sizes for this tyre are: WHEEL fixing with square 18mm. TYRE outside diameter 118mm. WHEEL inside diameter 90mm. TYRE tota width 65mm. Note:The harder a tire compound - the longer it lasts, but the more moderate the performance.The softer a tire compound - the better the performance, but the lower the durability. Hint!As a rule, the same tires can be used for front and rear.If the vehicle tends to oversteer, this can be avoided by using a harder front tire!In wet conditions you should use a rain tire which offers maximum grip under these circumstances.With the use of Magic Rain, a tire traction compound, the grip can be further improved.Check your tires after driving! It can happen that a tire starts to detach from the rim, in this case you should glue this spot immediately with our tire repair kit (y0067), otherwise the tire could detach completely from the rim.So find out which tire is the best for you!
Genuine FG spare/option part. Unpainted body shell, fits chassis with 535 mm wheelbase, standard touring car width. Set rear wing included. The body shell is vac-formed from 2 mm Lexan.The flaps will be optionally delivered. The body is not drilled and fits all fabricate.Set includes 2mm front and main body sections and rear wing set. Required body mounts:Mount front: Rear body mount: Side body mount front: Side body mount rear: Measures:Length: 935 mmWidth: 392 mmHeigth: 240 mmWheelbase: 530 mmContents:1 piecePainting tips:
Genuine Samba spare/option part. The body shell is neither cut nor drilled, clear and can therefore be adopted to all touring cars with a 530/535 mm wheelbase.We have decided to make a new TC bodyshell to offer a new car from the WTTC series for the 5th scale drivers.Currently the most sought after large scale body shell with optimal aerodynamicsMaterial thickness 1 mm. The body shell consists of one part.Precut, the final cutting must be made according to the chassis you use it on.Width front / rear: 392 mm.Contents:1 piece
Normal retail price: 51,80 EUR for the set. The set is suitable for all Carson Wild GP Attack, Gas Devil, Hell Devil, CRT 4x4, Smartech Thunderbolt and HPI Baja 5b models. Included in the scope of delivery: - GPM Air Filter Cover, No. BJAFCO - GPM Starter Cover, No. BJPSCO - y0515 GPM Shock-Cover y0515 GPM Shock-Cover These protective covers for the shock absorbers keep dirt away from the piston rods and seals. This significantly increases the service life of these parts. Set of 4 pieces GPM air filter cover, no. BJAFCO GPM air filter cover, the pre-filter cover is simply slipped over the existing air filter. An elasticated band at the bottom secures the cover to the filter. The maintenance intervals for the main filter are extended enormously, especially in very dusty environments. Suitable for almost all standard filters, both foam and K&N. 1 piece GPM Starter Cover, No. BJPSCO The ‘air filter’ for the pull starter, prevents the starter from becoming clogged with dirt or grass. Also improves engine cooling when riding on grass, as less grass gets into the cooling air duct. Easy to fit using Velcro tape. With metal cable guide. 1 piece
Genuine Smartech spare/option part.Please note: It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. Actual product may be of different color. We have no bearing on this since we are not the manufacturer.Please note:It is recommended to use a gasket sealer with every gasket on an engine. This gives better sealing anda longer lasting gasket. We also recommend:y0804 HT-flange sealer 518 y0994 Marston sealery0807 MD-Sil RTV silicone sealerContent:1 piece