194100ER Challenge Line 2WD 530E RTR

Original FG spare/tuning part. The following items are required for completion:- E-motor, ESC, steering servo, transmitter system, LiPo drive batteries and charger. The models are built on a 4 mm aluminium chassis with double wishbones on the rear and front axles. All holes in the aluminium chassis for attaching the chassis parts are countersunk from below. The camber, caster and toe-in can be adjusted on the front and rear axles using track rods or adjusting screws with right/left-hand thread. Further equipment points are: Differential gear, smooth-running FG ball drive, oil-pressure shock absorbers with volume compensation and external adjustment ring for the spring preload. All rotating drive parts such as shafts, axles etc. are mounted on ball bearings. The tyres are glued to the rim. Not included : - RC system - 1100 KV brushless motor - 160A controller - Servo- You will also need Lexan paint and a decal sheet.Dimensions : - Length......840 mm - Width.....395 mm - Height.......250 mm - Wheelbase...465 mm

Genuine FG spare/option part. The FG Touring and Sports cars at scale 1:5 are known for their high quality and very detailed bodyshells true to original. Also the technically fully developed chassis are worth mentioning. These models are now available with a high-torque brushless engine. Surface conditions with maximum grip assumed speeds above 100 km/h can be reached and steered controlled. E stands for electric power which is equivalent to extremely high torque, high speed and all this without any engine noise. The Challenge Line models are equipped with a powerful 800 - 1300 kV brushless Motor and a 150A brushless ESC. This control can be regulated simply via transmitter or optionally via the program card.The models are built on a 4mm aluminium chassis with rear wheel drive and double wishbones front and rear. All borings are countersunk. Fully adjustable front and rear double wishbone suspensions.Further equipment points are: differential gear, oil-pressure shock absorbers with volume control and external, adjusting ring for the initial tension of the spring. All rotating parts on ball bearings.Tires are glued on the rims.For all versions of the electric cars, the LiPo batteries and the matching charger, as well as the radio system and the steering servo (RTR) are required. In our shop selection, the RTR set is available for a surcharge.For hassle-free assembly, FG recommends using LiPo batteries 2x 2S or 2x 3S, with a maximum dimensions of 150 mm in length and 50 mm in width. The model comes with the EC8 connector system equipped.

Original TopTuning spare/option part. Carburetor heat sink for all Zenoah/CY/HPI/Losi and PT-Smartech/Carson engines.Fits all Walbro 603/813/990/771/527/1107 carburetors as well as all Smartech/Carson PT engine carburetors and many more!The TopTuning carburetor heat sink counteracts the notorious vapor lock at high engine temperatures.In fact all current large scale engines have a special adaptor for the thermal insulation of the carb (isolator) to keep the carb as cool as possible, so that the fuel does not form bubbles due to heat transfer from the cylinder. And without this isolator the gasoline would literally cook after a short operating time and therefore the engine would receive a leaner mixture. The much feared lean-out until the engine stalls is inevitably.Unfortunately, even a special isolator is often insufficient at higher ambient temperatures or when the engine is subjected to higher loads, e.g. in racing. In such scenarios the better heat dissipation of the Top Tuning carburetor heat sink contributes to the solution of the problem.The easy to install heat sink, requires a considerable manufacturing and milling effort and fits easily to all common 1:5/1:6 large scale cars, such as FG, Mecatech, Smartech/Carson, HPI, Losi, etc..For installation in FG 4WD cars the rear cross member # 66212 must be modified.Attention: the Allen head screw is an imperial size and therefore not compatible with metric Allen wrenches! Available in our options menu Content: Carburetor heat sink 1 x Allen head screw #8-32 x 5/8" (for Walbro carbs) 1 x washer 4 mm

BUILD YOUR OWN ORIGINAL,AUTHENTIC HPI BAJA 5BHPI large scale fans, we have heard you! The one and only original HPI Baja 5B is BACK and ready for you to build from the ground up! The HPI SBK collection of Self Build Kits grows with the addition of not just one, but TWO 1/5th scale HPI kits! Fans of large scale off-road RC will be super excited to build their own gas-powered 1/5th scale Buggy with the HPI Baja 5B Self Build Kit!When the HPI Baja 5B buggy was first introduced, large scale RC was very expensive and quite difficult for the average RC hobbyist to experience. Using highly durable parts and innovative design features, HPI brought large scale off-road to new enthusiasts and ushered in a new, BIGGER era of RC!Now, YOU can build and own the legend! Experience the thrill and excitement of building a car which ends up being over 80cm (nearly 32 inches) long and weighing nearly 10kg (over 21 lb)! Just install your own engine and electronics as you build the HPI Baja 5B and you'll be ready for any adventure that comes your way!With extra-tough drivetrain parts like the viscous torque differential, super-durable composite spur gear with internal damping and all-metal drivetrain, the HPI Baja 5B is ready for your 23-32cc 2-stroke engine so you can experience the joy of gas-powered RC and up to 30-minute runtimes!The HPI Baja 5B is also equipped with extra-big and super-tough suspension parts, featuring awesome HPI durability! With its expertly designed molded composite suspension plus extra-long adjustable HD shocks, and massive high impact nylon 3-piece beadlock wheels, the Baja 5B is ready for full-speed racing on any off-road circuit!The 4mm thick 6061 aluminum monocoque chassis gives the HPI Baja 5B the classic desert racing buggy look. Precisely bent into shape for maximum strength, the chassis provides the mounting points for the engine and suspension, forming the backbone of the car. Precise steering is provided by a dual-bellcrank rack and cam-type servo saver. Aluminum parts are anodized in cool gunmetal and the classic Baja desert racer clear polycarbonate body is included in the SBK kit, ready for your custom racing scheme!The Baja 5B SBK is a great addition to your HPI collection, as well as a fabulous introduction to large scale buggies!RACING CHASSIS DESIGN & LAYOUTThe narrow channel chassis made from rigid 4mm 6061 aircraft aluminum and gives the HPI Baja 5B a classic desert racing buggy look and extreme stiffness and durability. The U-shaped chassis is protected at the rear with a thick plastic skid plate for extra protection to the motor and drivetrain.The tube roll cage is made of high impact nylon and topped with a real aluminum roof to carry on the classic looks. The roll cage is fully functional and protects the motor and internals from crash damage. The roll cage, radio box, body panels, wing, undertray and gear case are all mounted with fast access clips for easy maintenance. To finish you need: Engine with clutch and exhaust Remote control with servos and receiver battery Charger Two cans of Lexan paint Features Summary Unassembled 1/5th scale Off-Road Buggy Ready for your 23-32cc RC engine Ready for your electronics Enclosed radio box Baja desert racing body design Adjustable HD shock absorbers Monocoque chassis Low CG for superior handling Long travel suspension Viscous torque oil-filled gear differential All-terrain tires Beadlock wheels with metal insert hubs Aluminum rear shock tower Hard plastic skid plates Adjustable rear wing Quick access to all critical maintenance points Dual bellcrank steering Cam type servo saver Race spec Hex socket hardware Gunmetal anodizing Full set of rubber-sealed ball bearings Chassis Specifications Overall Length 817mm Height: 255mm Width: Front - 460mm; Rear - 480mm Tire Track (to center of tires): Front - 395mm; Rear - 400mm Wheelbase: 570mm Ride Height: 76mm Suspension Travel: Front - 95mm; Rear - 100mm Weight: 9.6kg (21.3lb) Adjustable Camber: front - shims; rear - screw Front caster: adjustable with shim 22 / 25.5* / 29 degrees (* stock) Toe-in: Front adjustable with tie rod; Rear adjustable with inserts 0-4 degrees (3 degrees stock set-up) Aircraft aluminum 6061 T6 monocoque chassis Double wishbone suspension with adjustable roll center F/R Drive system: HD metal gears with sealed gear box (8.382:1 gear ratio) Differential: viscous torque control with 4 pinion gears; sealed diff case with silicone oil Shock absorber: HD Aluminum coilover shock absorber with fully adjustable preload collar Wheel type: 3-piece beadlock design, high impact nylon material with inset heavy-duty metal hex hub

For stunt and bashing performance at its biggest and best, the ARRMA® OUTCAST 1/5 8S Stunt Truck has no equal. In this new ready-to-run version, it's better than ever before! Not only is the OUTCAST 1/5 8S EXB Stunt Truck RTR loaded with EXtreme Bash parts for even greater durability, but it also arrives with higher-powered Spektrum 8S LiPo-capable brushless electronics already installed all at an astonishingly affordable price.Punchy and powerful, the new Spektrum 8S-capable brushless system features a massive 5687 FIRMA 1100Kv brushless motor with a huge 56mm diameter and 10% more torque than the previous OUTCAST 8S RTR. The new motor is paired with a Spektrum S6510 steel gear servo that puts out 820 oz-in of torque at 8.4V nearly 50% more muscle than its predecessor. The new RTR package also includes a Spektrum FIRMA 160A V2 Smart ESC and Spektrum DX3 3-channel 2.4GHz DSMR radio system, with Spektrum AVC technology built-in to keep the huge power under control.The toughness engineered into the ARRMA® OUTCAST 1/5 8S EXtreme Bash Stunt Truck must be bashed to be believed. A huge number of EXB-hardened parts and options give it virtually unstoppable strength straight out of the box. They include a 5mm thick EXB 7075 T6 CNC aluminum laser-etched chassis plate; EXB red-anodized CNC aluminum front brace mount; and EXB front bumper with impact absorbing design. Topping it all off is an aggressive truck body with a bold new EXB matte-and-gloss paint scheme, for a look unlike any other vehicle. No "Candy Crush" designs here the OUTCAST EXB is built to be as purposeful as it looks!Adjustable, oil-filled, 20mm bore shocks with 6mm thick shock shafts and ultra-thick composite towers soak up bumps. The ARRMA® OUTCAST 1/5 8S EXtreme Bash Stunt Truck RTR blasts over all kinds of surfaces, from asphalt to dirt and grass. Big dBoots® BACK FLIP 2 big block tires on multi-spoke wheels add all-terrain traction. Everything in the durable design contributes to confident control and responsive handling for whatever eye-popping stunts you can imagine.A center body support, aluminum center braces and composite chassis side pods add more strength. All-metal diff outdrives and gearbox internals, plus durable steel driveshafts, provide a reliable, heavy-duty drivetrain that holds up to extreme action.Of course, the popular, easy-access ARRMA® modular design lowers your maintenance downtime to the minimum so you can keep on enjoying the surprisingly affordable high-end performance without interruption. Ultimately, the OUTCAST 1/5 8S EXtreme Bash Stunt Truck is more than a massive and powerful bashing machine. It's the biggest and best ARRMA® ready-to-run basher to date! EXB (EXtreme Bash) ComponentsEXB-hardened components throughout its fully assembled chassis give the 1/5 scale ARRMA® OUTCAST 8S EXtreme Bash Stunt Truck RTR virtually unstoppable strength. Steel TurnbucklesHeavy-duty components including the 8mm thick steel rear turnbuckles and 7mm thick steel steering turnbuckles enable the 1/5 scale OUTCAST EXB to withstand extreme off-road bashing. Oil-Filled ShocksMounted on ultra-thick composite front and rear towers and featuring plush shock tuning, the adjustable, oil-filled, 20mm bore shocks with 6mm thick shock shafts easily soak up bumps. High-Traction dBoots® TiresLong-lasting new Big Block dBoots® Back-Flip BB tires on multi-spoke wheels with durable hubs deliver all-terrain traction and add an aggressive edge to the EXB matte and gloss effect finished truck body. Quick Motor AccessARRMA® holds your maintenance downtime to the minimum with an efficient, driver-friendly design. For example, the easy-access, 3-bolt sliding motor mount allows quick motor removal. Electronics ModuleThe easy-access, molded electronics module screwed to the chassis contains a waterproof receiver box, servo mount and ESC tray ready to protect your electronics from dirt and moisture. Multi-Structured Center Brace SystemMade of rugged anodized 7075 T6 aluminum, the laser-etched 5mm chassis plate includes strong composite chassis side pods and a center body support and brace for maximum durability. Durable Metal ConstructionDurable steel driveshafts plus all-metal diff outdrives and gearbox internals keep the heavy-duty 4-wheel drivetrain rolling over punishing tracks. An EXB-toughened suspension system smooths the ride. Smart TechnologieThe included Spektrum DX3 Smart transmitter and SRS6110AT AVC® (Active Vehicle Control®) receiver let you take full advantage of the Spektrum Smart Firma brushless motor and ESC's innovative telemetry capabilities. Download the free Spektrum Dashboard App to your mobile device and follow motor RPM, ESC temperature, receiver voltage, drive pack voltage and more data in real-time. Dial-in extra stability with the radio's AVC® system to carve corners and nail jumps without letting up on the throttle. Features The ultimate ARRMA® 1/5 scale RTR Stunt Truck Engineered tough with EXtreme Bash 7075-T6 aluminum parts Bigger, tougher shocks, linkages, turnbuckles, and more Aggressive new EXB matte-and-gloss color scheme Updated 8S LiPo capable Spektrum brushless power system EXB 7075 T6 5mm thick CNC aluminum laser-etched chassis plate EXB Red-anodized CNC aluminum front brace mount Spektrum FIRMA 1100Kv brushless motor with 10% more torque Spektrum S6510 steel gear waterproof servo with 47% more torque Spektrum DX3 3-channel 2.4GHz DSMR radio Spektrum SR6200A DSMR receiver with AVC® Updated Spektrum FIRMA 160A V2 Smart ESC for more punch and better driving feel New big block dBoots® Back-Flip BB tires Front bumper with impact-absorbing design Easy-access 3-bolt sliding motor mount Heavy-duty drivetrain Easy-access front and rear diff module design All-metal diff outdrives and gearbox internals Durable steel driveshafts Durable wheel hubs Easy-access waterproof electronics module Center body support and brace for maximum durability Strong composite chassis side pods Wheelie bar High-quality CNC machined aluminum 24mm wheel wrench included

The new off-road flagship from FG. The Leopard Competition 2020, made of high-quality aluminium and carbon fibre components, is the winner of the first French championship, showing directly what this vehicle is capable of. The model comes with a 26cc engine, a central hydraulic brake, wheels and unpainted clear body. This buggy combines high performance with top driving characteristics and maximum reliability.The complete radio system and the servos (RTR!) are required for operation.The complete RTR equipment can be selected in our online shop options menu for a surcharge.The new benchmark for 2WD competition buggiesNew extended chassis with 580 mm wheelbaseMilled front chassis part to improve mass distributionSide chassis stiffeners made of T7075 alloy Newly developed tuned pipe systemNewly developed and weight-saving radio plateWinner of the first racing series of the French championshipDimensions:Length: 780 mm Width: 470 mmHeight: 330 mmWheelbase: 580 mmWeight: 10 kg