Skip to main content Skip to search Skip to main navigation
EXTRA 20% off Outlet*. Use Code: EXTRA20 at checkout!!
+49 2151 820200 Mon-Fri 9 am - 6 pm, Sa 9 am - 1 pm

AT-5T003 ATOP Aluminum top chassis brace Losi 5ive-T/2.0 and Mini

Product information "AT-5T003 ATOP Aluminum top chassis brace Losi 5ive-T/2.0 and Mini"

Genuine ATOP spare/option part.

CNC-machined from 6061-T6 aluminum by ATOP.

Complete with all required hardware.

Contents:
  • 1 piece

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Customers also bought

Average rating of 0 out of 5 stars

AT-5T006/007 ATOP Aluminum front and rear skid plate Losi 5ive-T/2.0 and Mini
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: complete 141 grams.Contents:1 set

€49.90*

Average rating of 0 out of 5 stars

AT-5T001/002 ATOP Chassis brace Losi 5ive-T/2.0, front and rear
Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.New improved designs combines increased strength with reduced weight. Both together give a total weight of 130 grams.Contents:2 pieces

€64.90*

Average rating of 0 out of 5 stars

y1309 All steel linkage for steering servo/servo saver application
Genuine HT spare/option part.Very strong linkage with M6 steel ball joints.M6 threaded rod with lock nuts, balls with holes for M4 screws.Maximum length about 96 mm, but through cutting the M6 rod allows for a minimum length of 48 mm.Significantly stronger than the standard plastic version, and especially recommend when using the Hitec HS-900SGS/HS-1000SGT/HS-1005SGT/HS-1100WP servo, this linkage can be used with "normal" servos as well.The threaded rod is not designed as a turnbuckle for a reason because there is not need to change the adjusted length for this application after installation. The setting accuracy of 0.5 mm (½ turn) means a maximum difference to the ideal length of 0.25 mm. This is always sufficient, the trim on the transmitter handles the final adjustment.On the other hand, a connecting rod with the same thread on both ends will always keep its setting when installed, even when both lock nuts are not tightened against the ball joints. Therefore reliability is higher.Set includes:2 x steel ball joints M62 x flat lock nuts1 x M6 x 60 mm threaded piece for Losi 5ive-T1 x M6 x 80 mm threaded piece for Losi 5ive-T 2.02 x spacer tubesContents:1 piece

€27.90*

Average rating of 0 out of 5 stars

LO5T331F GPM Rear Gear Box Protector for Losi 5ive-T/2.0
Full length about 127 mm long. Made from high strength 7075-T6 aluminium. 3,5 mm thickness. Stiffing reinforcing 1,5 mm wide and 1,4 mm thick.Content:Four allen head screws M6 x 20 mm Weight: 357 grams/ pair

€29.90*

Average rating of 0 out of 5 stars

TLR256012 TLR Air Cleaner Foam Elements 5ive-B
Genuine TLR spare/option part.Spare part for TLR/Losi 5ive-B.Contents:1 piece

€19.99*

Average rating of 0 out of 5 stars

y1419 Sintered steel clutch for Zenoah and many other engines from 23 cm³ to 32 cm³
Sintered steel clutch for Zenoah and many other rc-car engines from 23 cm³ to 32 cm³.Note: The sintered steel clutch needs a break in period of at least half an hour run time after their first installation. Only then the clutch surface reaches the desired grip and provides the necessary friction. After that the clutch will show consistent operation and extremely low wear!With 80 grams the weight of the clutch is about the same as the usual OEM clutches.As with all non-adjustable clutches a periodic monitoring of the clutch spring is recommended. By changing the spring, it is also possible to match your car to the track conditions, i.e.: the harder the spring, the higher the stall speed of the clutch.If not on hand, for installation of the sintered steel clutch a clutch spring, the Zenoah screw set # 7318 and the original Zenoah clutch mount # 7315 are required!

€19.00*

Similar products

Average rating of 0 out of 5 stars

AT-5T006/007 ATOP Aluminum front and rear skid plate Losi 5ive-T/2.0 and Mini
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP.Protects chassis plate and transmission case over rough terrain. Also reinforces the chassis plates narrow section in front of the gear case. Thickness: 4 mm, weight: complete 141 grams.Contents:1 set

€49.90*

Average rating of 0 out of 5 stars

AT-5T005 ATOP Aluminum axle extenders Losi 5ive-T/2.0/B, Mini, with closed nuts
Genuine ATOP spare/option part.CNC-machined from 6061-T6 aluminum by ATOP RC, increase track width for 25 mm and allow for the use of HPI 5T, Losi 5ive-T, 5ive-B and Mini rims. 5 mm o-rings protect against drive pin loss. Set of four inclusive o-rings, drive pins and closed wheel nuts (wrench size 24 mm!).Contents:1 set

€49.90*

Average rating of 0 out of 5 stars

AT-5T022 ATOP Aluminum differential case for Losi 5ive-T/2.0/B and Mini, one-piece design
Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by Area RC.The big advantage over the stock plastic part is its temperature insensitivity. While the plastic case loses its strength with increasing temperatures and may finally disintegrate, the aluminum case stays intact.The one-piece design guarantees a true running and leak-free case. Steel bushing for drive cup shaft and O-ring.Fits front, center and rear applications on all Losi 5ive versions and Mini!Contents:1 piece

€49.90*

Average rating of 0 out of 5 stars

y0057 Ball & socket tool for Losi and HPI
Genuine HT spare/option part. Ball & socket tool with t-handle, special version for the ball joints.Fits Losi 5ive-T. 5ive-B, Desert Buggy XL, Desert Buggy XL-E, Monster Truck XL and the HPI Baja 5B and Baja 5R Ford Mustang.Contents:1 piece

€17.90*

Average rating of 0 out of 5 stars

AREA-5T-018 Aluminum spring perches Losi 5ive-T/2.0/B and Mini
Genuine FG spare/option part.CNC-machined from 6061-T6 aluminum by Area RC.Contents:2 piece

€19.90*

Average rating of 0 out of 5 stars

y0722 Axle plugs for Losi 5ive-T/2.0, Mini
y0722 Quanity: y0722/01 - Set of 4
For sealing the axles on Losi 5ive-T and Mini cars, keeps debris out of the inner screws which secure the retainer pin. Set of 4 or set of 10 to choice.Can be used for Losi 5ive-T, Mini and HPI Baja cars.

€3.90*

Average rating of 0 out of 5 stars

AT-5T001/002 ATOP Chassis brace Losi 5ive-T/2.0, front and rear
Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.New improved designs combines increased strength with reduced weight. Both together give a total weight of 130 grams.Contents:2 pieces

€64.90*

Average rating of 0 out of 5 stars

AT-5T018 ATOP Aluminum spring perches Losi 5ive-T/2.0/B and Mini
Genuine FG spare/option part.CNC-machined from 6061-T6 aluminum by Atop RC. Contents:2 piece

From €19.90*

Average rating of 0 out of 5 stars

LO5T153 GPM Piggyback reservoir Shocks Losi 5ive-T/2.0/B/Mini, front set
Genuine GPM spare/option part. The GPM piggyback reservoir shocks increase the oil volume and the separate vent screw makes filling the shocks easier. Shocks come in pairs including all-metal lower ball joints, spring perches and springs with 2.75 mm wire diameter.These technically demanding, excellently manufactured GPM Piggyback shocks come ready for use, assembled and filled with 1000 viscosity silicone oil. For a possible fine tuning (less damping with lower viscosity, more with higher viscosity) we recommend our silicone oils y0038 (50 ml) or y0039 (100 ml). Approximately 23 cm³ of oil is required to fill one shock absorber.Suitable for Losi 5ive-T, 5ive-B and Mini.The shocks are compatible with all springs offered for these vehicles such as Front:Length extended/compressed (center-to-center of mounting points): approx. 156 mm/110 mm.Contents:2 pieces / 1 pairs

€139.90*

Average rating of 0 out of 5 stars

AREA 5T-008/04 steering rod steel balls for 5T-008
Genuine Area spare/option part for set AREA 5T-008. Contents:2 pieces

€12.90*

Average rating of 0 out of 5 stars

y1477 Losi 5ive-T/2.0/B and Losi MINI 300m steel HD differential drive cups, booted f/r
y1477 Versin: y1477/01 Set for the front axle
Genuine HT spare/option part.These heavy duty differential drive cups for front or rear differential in a Losi 5ive-T/B or MINI WRC are made of 300M / Böhler V132 steel and are characterized not only by high hardness, but also simultaneously toughness. The service life is therefore much higher than for the stock cups.300M steel is used in motorsport and aviation for high strength parts. As a highly pure material, it is significantly more expensive than conventional steels, its high basic strength and toughness make the machining a time-consuming task.The shape of these drive cups now allows the use of driveshaft boots and grease lubrication, which increases service life enormously. In addition, these HD drive cups have two sets of slots for the pin of the drive shaft, this means another doubling of the service life.We recommend y0809 Klüber grease for lubrication of closed HD drive cups.A dry run like with stock parts is theoretically possible, but absolutely not recommended because it would waive the enormous advantage of encapsulated lubrication and the associated wear reduction. The set for the rear includes modified stock alloy bearing carriers, which provide improved clearance for the driveshaft boots.You can find advices for installation at the specifications-tab.Contents:Front set:2 pieces of 300M steel HD differential drive cup, front and rear application2 pieces of driveshaft bootsRear set:2 pieces of 300M steel HD differential drive cup, front and rear application1 pair of modified bearing carriers2 pieces of driveshaft boots

€119.90*

Average rating of 0 out of 5 stars

AT-5T012 ATOP Front camber rod 5ive-T/2.0
Genuine ATOP spare/option part. Upper front camber rods with guide bushing set and with pivoted steel ball joints right/left thread and locknuts for Losi 5ive-T. Balls with 6 mm hole, adapter bushings for 5 mm screws, shortest distance between mounting points (center/center) 130 mm. Contents:2 pieces

€39.90*

Customers also viewed

Average rating of 0 out of 5 stars

AREA-5T-012/02-01
area_ar_l012_02_01 Version: AREA-L012/02-04 for either Losi-OEM orSavöx 236 sized servos
Genuine Area spare/option part.The plate fits Losi stock servos.Replacement part for: AREA-5T-012 radio plate set V3 for Losi 5ive-T and Mini.Content:1 piece

€79.90*

Average rating of 0 out of 5 stars

AT-5T001/002 ATOP Chassis brace Losi 5ive-T/2.0, front and rear
Genuine ATOP spare/option part. CNC-machined from 6061-T6 aluminum by ATOP.New improved designs combines increased strength with reduced weight. Both together give a total weight of 130 grams.Contents:2 pieces

€64.90*

Average rating of 0 out of 5 stars

y1303/12 EC8 female connector
Genuine HT spare/option part.Two-pole, reverse-polarity protected socket with very high current capacity. The opening in the contact for the cable has a diameter of 6.5 mm, which is suitable for stranded cables up to about 16 mm² (~ 5 AWG). The easy to grab housing ensures easy disconnection.For assembly, the contact with a soldered cable is press fitted into the housing from the front, where it snaps into place.When used without the blue housing, the contacts are also compatible with the 8 mm bullet connectors found on many larger brushless motors.Contents:1 piece

€5.90*

Average rating of 0 out of 5 stars

y1303/11 EC8 male connector
Genuine HT spare/option part.Two-pole, reverse-polarity protected plug with very high current capacity. The opening in the contact for the cable has a diameter of 6.5 mm, which is suitable for stranded cables up to about 16 mm² (~ 5 AWG). The easy to grab housing ensures easy disconnection.For assembly, the contact with a soldered cable is press fitted into the housing from the front, where it snaps into place.When used without the blue housing, the contacts are also compatible with the 8 mm sockets found on many larger ESCs.Contents:1 piece

€5.90*

Average rating of 0 out of 5 stars

TT1021 Top Tuning Electric conversion kit for Losi 5ive-T/B 1.0 and Mini
Genuine Top Tuning spare/option part. All aluminum parts are made of 7075 alloy.Front motor mount design to assure ample clearance for the rear brake disc when running mechanical brakes.Accepts two batteries up to 150 mm long und 50 mm wide. The battery tray accepts batteries up to 164 mm long, but the motor pinion limits the max. length of one battery to 155 mm.Rear motor clamps: - Diameter 55,75 mm z.b. for Losi Spektrum 780 kV - Diameter 57 mm z.B. for Tenshock oder Castle- Diameter 57,8 mm z.B. for Leopard Baureihe 58- Diameter 60 mm z.B. for Lehner- Diameter 70 mm z.B. for BP70120 ZTW Beast Brushless Motor 620 kV Please note: This set does not include Motor or ESCThis conversion kit is not intended for the 5ive-T 2.0, even though the installation in this vehicle would be feasible with some modifications (drilling and thread tapping required). The version for the 5ive-T 2.0 you can find here: TT1024. Driving batteries with the following maximum dimensions can be installed: Length: 165 mm Width: 51 mm Height: variable The speed controller (ESC) requires EC8 connections or corresponding ! Contents:Motor mount with your choice of rear clamp for 57 / 57.8 / 60 / 70 mm motor diameterBattery carrier plate made of 3 mm epoxy with aluminum brackets for the hook-and-loop tapes4 hook-and-loop tapes to secure the batteriesaluminum mounting pedestals for the battery plate16T pinion with 8 mm bore diameterMounting screws

€289.90*

Average rating of 0 out of 5 stars

6544/01 FG Charging cable EC8 with gold contacts
Genuine FG spare/option part.Contents:1 piece

€13.90*

Average rating of 0 out of 5 stars

y1407/01 MadMax CROSS BOND 170x80/x60 tires for HPI + Losi (24 mm hex drive)
CROSS BOND 170 x 80 mm and 170 x 60 mm tires with black MadMax Extreme 20 bolt-beadlock rims with 24 mm hex drive and reinforced beadlock rings were designed for use on loose surfaces. The extremely rigid and differently structured lugs of the CROSS BOND ensure optimum power transmission and also allow for excellent grip on loose surfaces, such as sand and soil. The lugs are raised at the treads outside, and therefore provide maximum grip, particularly when cornering where the tire is canted to the outside. Due to the extreme load created by the MadMax CROSS BOND tires the rim was optimized again with a reinforcement ring.The tires are fitted with a special rigid insert, which can handle the cornering forces and maintain the tires shape even on heavy cars. We recommend to check the beadlock screws after the run. Dimensions:Outer diameter: 170 mmFront tire width: 60 mmRear tire width: 80 mmReinforced 24 mm hex driveThe video shows the 18 mm square drive version. Also available with 24 mm hex. Some off-road tires knowledge can be found here!

€119.90*
Loading...
Upload in progress, please be patient ...
Shopware-Agency Shopware-Theme Development