SB030 GPM aluminum rear shock towers Losi super Baja Rey / 2.0 / Rock Rey

€69.90*

Available

Product number: gpm_sb030

EAN: 4894538305258

Product information "SB030 GPM aluminum rear shock towers Losi super Baja Rey / 2.0 / Rock Rey"

Genuine GPM spare/option part.

GPM's aluminum rear shock tower for the Losi Super Baja Rey / Rock Rey is much more rigid than the standard plastic part. It offers an increased number mounting positions for the shock and therefore allows for a more precise setup.

Contents:

1 set

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Share your insights with others.

Similar products

TT1040 Top Tuning 24 mm hex wheel drives for Losi Super Baja Rey / 2.0 and Super Rock Rey / plastic spindles

Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey and Super Rock Rey.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: The adapters only fit in combination with the standard plastic steering knuckles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which then prevents the drive pin from being fitted.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fender wells will need some cutting.Please note: the wide rear wheels from MadMax or HPI do not fit!This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm

€24.90*

TT0198 Top Tuning Bubble-Ex for 1/10 up to 1/5 scale rc-cars

Genuine Top Tuning spare/option part. Indispensable for optimal suspension tuning!Vacuum container for removal of bubbles from shock fluid when filling shocks.A vacuum pump is built into the lid. The tray has four holes each to accept 1/10, 1/8, 1/6 and 1/5 scale shocks.Suitable for shock absorbers from Losi, Mecatech, BWS, Arrma, Traxxas, FG, Carson, HPI and many more, as long as they have a suitable diameter. All shocks from 15 to 32 mm outer diameter can be used in the Bubble Ex to be "de-bubbled". Tray bore sizes: No. 1 = 32 mm diameter No. 2 = 21 mm diameter No. 3 = 17.5 mm diameter No. 4 = 15 mm diameter The maximum length of the shock absorber up to the upper edge of the body is about 150 mm, whereby longer shock absorbers can also be partially compressed for insertion. (e.g Losi 5ive-T and many more)Operation:Unlock the vacuum pump by turning it slightly to the left, the pump handle then extends a little. The small plug with handle is used to close and ventilate the container. To build up the vacuum, the plug must be in the down position.The small membrane on the opposite side serves as an indicator for whether a vacuum is present. Only when this is curved outwards the lid of the container can be opened again without any effort. Content: Can with integrated vacuum pump Shock tray

€49.90*

TT1044 Top Tuning 24 mm hex wheel drives for Losi Super Baja Rey, 2.0 and Super Rock Rey / aluminum spindles

Genuine Top Tuning spare/option part.TopTuning 24mm hex wheel drives are required if you want to run wheel combos with the standard 24mm hex drive (such as Losi 5ive-T/B; DBXL; HPI-Baja etc.!) on your Losi Super Baja-Rey, Super Baja Rey 2.0 and Super Rock Rey. Suitable for 8 mm axles.The stock Super Baja-Rey / Super Rock Rey20 mm hex drives (# LOS252077) will be swapped for the TopTuning 24 mm version. No additional parts are required for installation of the 24 mm hex wheel drivers. The Losi Super Baja-Rey's fake brake discs and calipers must be removed prior to assembly.Attention: For the attachment of the wheels you also need wheel nuts with M18x1.5 thread (i.e. AT-5T004), which are also offered in our shop's option menu!Please note: These adapters only fit in combination with the optional aluminum spindles or wheel bearing carriers. The aluminium versions have a slightly larger bearing distance, which requires different dimensions for the wheel drives.As already mentioned in the Losi instruction manual, the gearing should be adjusted depending on terrain and tire tread.Depending on tire size the rear of the fenderwells will need some cutting. Please note: the wide rear wheels from MadMax or HPI do not fit! This applies in particular to aggressive tread large diameter off-road tires and demanding terrain. In this case we recommend the profile regraded, nitrided 15T pinion # TT1021/07 from the TopTuning.Weight per piece 28 grams (original LOS25077 weighs 23 grams).Contents:2 pieces of 24 mm hex wheel drives, machined from 7075 aluminum2 pieces of hardened drive pins 3x23,8 mm

€24.90*

y0551 HT Car Bag for 1/6 scale cars (Fits FG, Smartech/Carson a.s.o.)

Hobbythek car bag for 1/6 cars. Fits for all 1/6 models for example: FG Offroad-; Monster/Stadium-; Racetruck-; Carson-; Smartech-; Reely Carbon Fighter; Losi Super Rock Rey, Super Baja Rey, Axial Jeep and any more models. Made from extremely durable fabric, easily washable; with wrap-around shoulder belts and zipper closure. No dirt in the car boot! Dimensions: Length: 70 cmWidth: 50 cmHeight: 40 cm

€54.90*

TT1021/07 Top Tuning electric Motor pinion nitrided hardened, 8 mm bore, module 1.5

Genuine Top Tuning spare/option part. Motor pinion made of nitrided hardened steel, module 1.5 and 8 mm bore. Reinforced hub for set screw M5x6. The pinions with odd tooth counts are profile shifted. Within the same outer diameter, there is no need to adjust the backlash when changing the pinion. When mounting on vehicles with mounting holes in the motor mount that are specific to the tooth count, the mounting holes for the higher number of teeth in each case (16 or 18) must be used.Profile regraded:This means that the number of teeth is changed while the diameter remained constant. The part of the involute curve that defines the tooth profile is changed. Positively regraded (lower number of teeth) pinions are stronger and run smoother, the reduced strength of negatively regraded pinions doesn´t really matter. Available in two sizes with two tooth counts:Outer diameter 30 mm with 17T or 18TOuter diameter 27 mm with 15T or 16TContents:1 piece

€23.90*

Details

SB022 GPM aluminum rear wheel bearing carriers for Losi Super Baja Rey / 2.0 / Rock Rey, 0°

Genuine GPM spare/option part. Rear wheel bearing carriers for Losi Super Baja Rey / Rock Rey, 0° toe-in (stock) made by GPM, machined from high grade 6061-T6 aluminum provide better fit for the bearings and therefore increase their life span.We recommend installing the ball bearings with a little dab of screw cement.Contents:2 pieces

€26.90*

y1541 Complete screws/nuts/washer set for Losi Super Baja Rey / Rock Rey

Genuine rc-car-online spare/option part. Komplete set of screws, nuts and washers for the Losi Super Baja Rey.The set includes a total of 321 screws, in different quantities which are all used on the Losi Super Baja Rey / Rock Rey.6 sizes of cap head screws11 sizes of CSH screws13 sizes of button head screws6 sizes of set screws3 sizes of washers4 sizes of self-locking nutsComes in a high quality 190x170x40 mm assortment box.Contents:Cap head screws in 12.9:4 piecesM2x101 piecesM2,5x813 piecesM3x102 piecesM3x122 piecesM3x165 piecesM3x306 piecesM3x45 CSH screws in 10.9:5 piecesM2,5x86 piecesM3x66 piecesM3x1234 piecesM3x161 piecesM4x1010 piecesM4x122 piecesM4x149 piecesM4x166 piecesM4x1814 piecesM4x202 piecesM4x25Button head screws in 10.98 piecesM3x89 piecesM3x195 piecesM3x126 piecesM3x1616 piecesM3x204 piecesM3x304 piecesM3x3512 piecesM4x128 piecesM4x1618 piecesM4x2010 piecesM4x2512 piecesM4x301 piecesM4x35Grub screws:2 piecesM3x63 piecesM4x46 piecesM4x56 piecesM4x61 piecesM5x48 piecesM5x30Washers:Unterlagscheiben:5 piecesM3,25 piecesM4,34 pieces H5 Seeger HalfmoonSelf-locking nuts:4 piecesM335 piecesM4Nuts:2 piecesM45 piecesM5

€44.90*

This product is currently not available.

GPM SB055FRS-OC Front lower hinge pin plates for Losi Super Baja Rey / 2.0 / Rock Rey

Genuine GPM spare/option part. Front lower hinge pin plates from GPM for Losi Super Baja Rey / Rock Rey. Precision laser-cut from 3 mm stainless steel. Contents:2 pieces

€12.90*

SB010/+2MM GPM Axle extenders 2 mm Losi Super Baja Rey/ Rock Rey

Genuine GPM spare/option part. Axle extenders for Losi Super Baja Rey / Rock Rey, 2 mm per side (4 mm in total). 20 mm hexagon, matching the original rims. Since the driving pins are no longer completely secured by the rim when using axle extenders, special threaded bolts are used for this application.The set also includes closed wheel nuts to protect the outer edge of the thread.2 axle extenders2 threaded steel pins2 closed wheel nuts

€18.90*

SB170R/L/SP Replacement springs for rear GPM shock absorbers SBR/SRR

Original GPM Ersatz-/Tuningteil.Replacement springs for rear GPM shock absorbers SB170R/LAlso fits the stock Super Baja Rey/2.0/Super Rock Rey shocks. Compared to the 2.0 springs approx. 18% stiffer.9 coils2,6 mm wire thicknessapprox. 117 mm free length24 mm inner diameterInhalt:1 Stück

€9.90*

SB132F/SB170R GPM Front and Rear Piggyback Shock absorbers for Super Baja Rey (incl. 2.0)

Original GPM Ersatz-/Tuningteil.Shock absorber for Super Baja Rey (incl. 2.0) with external volume compensation in all-metal design, spring perches and lower ball joints are also made of aluminum. Oversized 7 mm diameter piston rod. Dimensions springs front: 9 coils 2,5 mm wire thickness approx. 88 mm free length 24 mm inner diameter Mounting hole spacing: extended approx. 134 mm, compressed approx. 103 mm. Dimensions springs rear: 9 coils 2,5 mm wire thickness approx. 117 mm free length 24 mm inner diameter Mounting hole spacing: extended approx. 171 mm, compressed approx. 123 mm. Inhalt:2 pair / 4 pieces

€149.90*

SB100F/R/L GPM piggyback reservoir shock caps f/r Losi Super Baja Rey / 2.0

Genuine GPM spare/option part. The GPM piggyback reservoir shock absorber caps for the Losi Super Baja Rey fit front and rear shocks. They increase the oil volume and the separate vent screw makes filling the shocks easier.According to Horizon Hobby he stock oil in the Super Baja Rey shocks is very close to a 350 viscosity, and we recommend y0038 genuine silicone shock absorber oil for refilling or changing to other viscosities. A 50 ml bottle will do all four shocks.Contents:2 pieces

From €39.90*

Details

Customers also viewed

LOS354006 Losi Alloy Axle Housing Upper Track Rod Mount, Super Baja Rey / 2.0 / Rock Rey

Genuine Losi spare/option part. Contents:1 pieces

€69.99*

SB022 GPM aluminum rear wheel bearing carriers for Losi Super Baja Rey / 2.0 / Rock Rey, 0°

€26.90*

AKX040 GPM Aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S

Genuine GPM spare/option part. Milled 6061T6 aluminum wheelie bar with wing mount for Arrma Kraton / Outcast 8S.Significantly stronger than the stock part, it also offers an adjustment option for the angle of the wing.Double ball bearing 55 mm diameter wheels made of Delrin with replaceable O-rings as "tread".Contents:1 set

€84.90*

LOS354007 Losi Aluminum Lower Rear Trailing Arms, Super Baja Rey / Rock Rey

Genuine Losi spare/option part. Contents:2 pieces

€89.99*

This product is no longer available.

10008 FG Formula 1 Competition 1/5

This model is fitted with numerous aluminium parts: front and rear side bulkheads, rockers, engine mount, suspension arm ends...Steel made Uniball sockets all possible enable all adjustments of the front and rear suspensions.The transmission made with a gearwheell drive offers outstanding reliability and smooth operation.Just like all other FG Competition models the FG Formula 1 Competition is the most successful model of the past years. The experiences we gained from numerous competitions have all influenced this version. The FG gearwheel drive which is extremely smooth running and cares for more power reserves. Surely FG Modellsport has created a competitive model for the next years with this version which will seamlessly follow up on the past successes. Highlights Alloy wishbones FG gearwheel drive Alloy rear axle plate FG alloy shock absorbers 04 Ball-bearing alloy servo saver 26 ccm Zenoah-Engine Airbox Tuned pipe Front- and rear brake 5 mm Chassis Lexan body shell Technical description of the FG Formula 1 Competition ki:The undercarriage of the FG Formula 1 Competition is built on an 5mm alloy chassis. All screws at the bottom of the chassis are countersunk.Front and rear axle mounts as well as the engine unit are connected over the complete length of the chassis, therefore we achieved almost the stiffness of a monocoque chassis. The quick fix system of the engine makes a fast changing of the engine possible. The drive to the rear axle is carried out over several easy-running front gearwheels and an FG ball drive at the rear axle. A separate flange bearing holds the clutch bell in order to relieve the crankshaft. Front and rear axle with their various adjusting possibilities as king pin angle, castor a.s.o. consist of alloy delta wishbones below. Solid alloy rear axle plates reduce the wear at the rear axle and give an enormous driving stability. 4 oil-pressure shock absorbers controlled by a pushrod suspension as well as stabilizers guarantee an optimal ground contact.We deliver the chassis selectively with tuning bowden cable brakes for front or respectively rear axle. The model is powered by a high-capacity 26 cm³ engine with airbox and Tuning pipe.Equipment of the FG Formula 1 Competition kitCNC-cut 5mm alloy chassis with lateral carbon fiber inserts, 26 cm³ engine, inlet silencer, Tuning pipe, FG gearwheel drive, ball drive, complete rear and front axle carrier unit with integrated engine quick-fixing device, double alloy wishbone fastenings, lower alloy delta wishbones at front and rear axle, front and rear alloy uprights, ball-bearing servo saver, steering stops, pushrods, 4 oil-pressure shock absorbers with alloy damper pistons, mechanical Tuning brakes at front and rear, stabilizer for front and rear axle, 10mm alloy balls, rear spoiler, polycarbonate body shell, polyamide front spoiler, receiver box, competition tires with tire inserts.We deliver the models as a kit including mounting instruction. The body parts are made of clear polycarbonate for your own painting. FG stickers and writings are enclosed.For the final assembly of the models you need further: radio control system (transmitter, receiver), 1 large steering servos (each approx. 40 - 50 kg), 2 servo for throttle brake (approx. 20 - 30 kg), batteries and charger.These parts are not included and must be supplied or ordered separately when the rc installation option is selected! Includet Zenoah 26cc engine Clear bodyshell and polycarbonate spoiler Mechanical brakesDimensions Length: 960mm Width: 440mm Height: 230mm Wheelbase: 620mm Formular 1 models in action!

€2,499.95*

Configure now

LOSB2552 Losi Steering Drag Link & Hardware 5T and Mini

Genuine Losi spare/option part.Fits Losi 5ive-T and 5ive Mini.Dimensionally identical with B55004/54003Contents:1 pieces

€29.99*

AT-DBXL022 ATOP Aluminum rear transmission mount for Losi DBXL/DBXL-E/2.0 + MTXL

Genuine ATOP spare/option part. Rear transmission mount for Losi DBXL cnc-machined from 6061 aluminum by ATOP.Through the use of aluminum, the problem of torn out threads (incl. the front bumper installation) is eliminated. At the same time the chassis section under the transmission is strengthened and the mounting points for the shock towers are reinforced.Comes with all mounting screws included.This is the new ATOP version with the additional mounting points between transmission housing and transmission bracket for a more secure connection of these parts.Old and new versions are fully compatible, regardless of whether they are made of aluminum or plastic. The parts therefore fit all versions of DBXL and MTXL in any combination.However, the use of the additional mounting points requires the new version of both transmission housing and bracket!Contents:1 piece This article is identical to the article in the video!

€79.90*