R334SBS Futaba Receiver 2.4 GHz T-FHSS SR

With the Futaba R404SBS, Futaba offers the fastest and most compact receiver for RC cars and boats on the market today! The R404SBS has the ultra-fast signal transmission F-4G (10 channels with telemetry at maximum transmission speed). This makes the model's response even more direct while maintaining maximum transmission reliability!The new F-4G (Futaba 4th Generation System) transmission mode supports the familiar SR mode and has an even higher transmission speed than the previous T-FHSS SR. At the same time, the size of the new F-4G receivers R404SBS / R404SBS-E could be reduced again. To make this possible, the R404SBS-E has a large, upward-pointing antenna to optimize signal reception. Due to the chosen design, the footprint of the receiver remains unchanged.To take full advantage of the speed of Futaba's F-4G SR technology, there are numerous FUTABA SV servos that can also be converted to SR mode. The following servos are currently SR compatible: BLS371SV, BLS471SV, BLS571SV, BLS671SV, BLS671SVi, BLS373SV, S9372SV, S9373SV, HPS CB700, HPS CT700, HPS CB500, HPS CT500.The R404SBS has antenna diversity. The receiver constantly compares which antenna has the better signal and switches to it in a flash. The R404SBS has the second antenna in the housing.S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter. This allows the measured values to be displayed or acoustically output at the transmitter.ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV! Technical specifications Transmission type: F-4G Frequency range: 2.4 GHz Channels: 4 PWM / 10 S.BUS Transmission power: 100 mW EIRP S.BUS Port: S.BUS2 Voltage range: 3.7-8.4V Dimensions: 25.5 x 20 x 10.6mm Weight: 5.7g Features 4/10 channel F-4G receiver 10 channels of telemetry at maximum transmission speed SR mode compatible Telemetry with S.BUS2 Telemetry with 32 channels S.BUS2 port Hi-Voltage (HV) Antenna diversity

Genuine Futaba spare/option part. The R334SB-E was produced by Futaba specifically for electric RC cars. The compact form, built-in aerial and short external aerial allow it to be tucked away under a body shell for a clean and professional installation without any sacrifice to the performance. You can use the R334SB-E in 'T-FHSS' mode, the faster 'T-FHSS High Speed' mode or even the ultra-responsive 'T-FHSS SR' Super Response mode making it versatile for racers and sport drivers alike. The HV (High Voltage) capability allows you to power it from a wide range of sources (3.7 to 7.4V) so you can extract the best performance from your servos without complex wiring.b>u>Features: /u>/b>ul>li>4-channel T-FHSS SR 2.4 GHz telemetry receiver with S. BUS2/li>li>fastest transmission system T-FHSS SR/li>li>diversity antenna for optimal reception/li>li>gold-plated contacts/li>li>telemetry function with 32 channels/li>li>S.BUS2Output/li>li>Hi-voltage/li>li>suitable for RC-cars & boats/li>/ul>b>u>Technical data: /u>/b>ul>li>frequency: 2.4 GHz/li>li>transmission system: Futaba T-FHSS/li>li>number of channels: 4/li>li>telemetry capable: Yes/li>li>serial connection (S-BUS, sum signal...) yes/li>li>input voltage: 3.7 - 8.4 volt/li>li>connector system: Futaba/li>li>length approx: 35.1 mm/li>li>width approx: 23.2 mm/li>li>height approx: 12.5 mm/li>li>weight approx: 8.3 g/li>/ul>b>u>Contents:/u>/b>ul>li>1 piece/li>/ul>

Genuine Futaba spare/option part. This Futaba R304SB-E is very similar to the R304SB (FUTL7680) in that they both feature 4-channels, both feature S.Bus2, both are Telemetry enabled and both cost roughly the same price.However, the two receives differ in two fundamental areas: this R304SB-E is only intended for electric vehicles, the R304SB is electric/nitro/gas, and this R304SB-E features the benefit of having a non-exposed built-in antenna - the R304SB is fully exposed.Features:T-FHSS SystemTelemetry Enabled4-ChannelsBuilt-in Hidden AntennaElectric Vehicle Use OnlySpecifications: Futaba System: T-FHSS S.Bus2: Yes Channels: 4 Range: 70m (230ft) (at best conditions) Power Requirement Rated Voltage: 4.8-7.4V Usable Voltage: 3.5-8.4V Size: 1.38x0.91x0.33" (35.1x23.2x12.5mm) Weight: 0.23oz (6.7g) Contents:1 piece

Small and low weight 6-channel FM narrow band receiver, 43,5 x 21 x 13 mm.

Genuine Futaba spare/option part.The R304SB is a compact light weight 4 channel receiver using T-FHSS telemetry. Suitable for HV applications the R304SB has an operating voltage range of 3.6 up to 8.4v.T-FHSS is a variation of Futaba's FHSS technology with the added bonus of telemetry. As standard the receiver will monitor its own voltage and transmit that back to your T-FHSS transmitter. There is also a S.Bus2 port included allowing you to plug in additional futaba telemetry sensors.Note:When using 7.4 V LiPo batteries as a receiver battery, the connected servos must also be designed for this voltage. The receiver does not have an internal voltage transformer for the servo voltage! Features: 4/4-channel T-FHSS 2.4 GHz telemetry receiver with S.BUS2 Telemetry function with 32 channels S.BUS2 output Hi-VoltageSpecifications: Frequency band: 2.4 GHzTransmission system: T-FHSSNumber of channels: 4 PWM / 4 S.BUSS.BUS-port: S.BUS2Voltage range: 3.7 - 8.4VDimensions: 35 x 23 x 12 mm Weight: 6.7 gContents:1 piece

Genuine FG spare/option part.Sparepart for Walbro WT-813 Carburator.Contents:1 set

With the Futaba R404SBS, Futaba offers the fastest and most compact receiver for RC cars and boats on the market today! The R404SBS has the ultra-fast signal transmission F-4G (10 channels with telemetry at maximum transmission speed). This makes the model's response even more direct while maintaining maximum transmission reliability!The new F-4G (Futaba 4th Generation System) transmission mode supports the familiar SR mode and has an even higher transmission speed than the previous T-FHSS SR. At the same time, the size of the new F-4G receivers R404SBS / R404SBS-E could be reduced again. To make this possible, the R404SBS-E has a large, upward-pointing antenna to optimize signal reception. Due to the chosen design, the footprint of the receiver remains unchanged.To take full advantage of the speed of Futaba's F-4G SR technology, there are numerous FUTABA SV servos that can also be converted to SR mode. The following servos are currently SR compatible: BLS371SV, BLS471SV, BLS571SV, BLS671SV, BLS671SVi, BLS373SV, S9372SV, S9373SV, HPS CB700, HPS CT700, HPS CB500, HPS CT500.The R404SBS has antenna diversity. The receiver constantly compares which antenna has the better signal and switches to it in a flash. The R404SBS has the second antenna in the housing.S.BUS2 sensors can be connected to the S.BUS2 port. They transmit up to 32 telemetry data sets. The receiver has an integrated telemetry transmitter that transmits the data to the transmitter. This allows the measured values to be displayed or acoustically output at the transmitter.ATTENTION: The receiver supports HV (High Voltage) and can be powered directly from a 2s LiPo battery. Always make sure that the connected servos are also designed for HV! Technical specifications Transmission type: F-4G Frequency range: 2.4 GHz Channels: 4 PWM / 10 S.BUS Transmission power: 100 mW EIRP S.BUS Port: S.BUS2 Voltage range: 3.7-8.4V Dimensions: 25.5 x 20 x 10.6mm Weight: 5.7g Features 4/10 channel F-4G receiver 10 channels of telemetry at maximum transmission speed SR mode compatible Telemetry with S.BUS2 Telemetry with 32 channels S.BUS2 port Hi-Voltage (HV) Antenna diversity

Original Spektrum Ersatz-/Tuningteil.Now ready to support the connectivity advantages of Smart Technology out of the box, the Spektrum DX5 Pro 2021 DSMR® also includes design and ergonomic improvements to give racers, bashers and boaters top-of-the-line features at an affordable price. Key Features Smart Technology compatible out of the box Five fully proportional channels Multiple mixing setups including Motor on Axle (MOA) Upgraded RF Module for stronger signal and improved output power 5.5-Millisecond frame rate with compatible receivers If you're a racer, basher or boater who's looking for an affordable radio with a "custom" feel and next-generation capabilities, look no further than the Spektrum lineup's new top-of-the-line surface transmitter: the 5-channel DX5 Pro 2021. Funktionen Smart Technology compatible out of the box Upgraded RF Module for stronger signal and improved output power Five fully proportional channels Generous ergonomic options for tailoring the transmitter to your feel Multiple mixing setups including Motor on Axle (MOA) DSMR® 2.4GHz technology (backwards compatible with DSM2®) 5.5-Millisecond frame rate with compatible receivers Advanced programming features, made easy to use with SimpleScroll interface Built-in telemetry Programmable vibe alerts 250-Model memory LiPo battery compatible (battery not included) Available as transmitter only or matched with an SR2100 DSMR® receiver, the DX5 Pro 2021 delivers the performance and comfort of a pro-class radio at a price that won't break your hobby budget. Its improved ergonomics, connectivity and programmability are ready to take your control to the next level. OUT-OF-THE-BOX SMART CONNECTIVITY The Spektrum DX5 Pro 2021 is ready right out-of-the-box to support the innovative connectivity of Spektrum Smart Technology. With a Spektrum Firma Smart ESC and Smart battery in your model, you'll have real-time telemetry data available at your fingertips to keep you aware of every component's status and to boost your confidence in its capabilities. Smart Technology ensures that all of your model's electronics work together seamlessly for the greatest efficiency and performance. It makes your entire system more responsive and simpler to use. IMPROVED SIGNAL QUALITY The DX5 Pro 2021 features Spektrum's latest RF module, engineered around DSMR® 2.4GHz technology. This generates a stronger and more robust signal, increases the telemetry range, and creates an extremely reliable connection between the transmitter and receiver. When paired with a receiver capable of 5.5ms frame rates, such as the SR2100, the DX5 Pro 2021 delivers lightning-fast response that gives new meaning to the word "connected". PRECISE STEERING WHEEL MECHANISM The ergonomically designed DX5 transmitter has a feel that any driver can appreciate. Its overall low weight minimizes fatigue, while the non-slip rubber grip and trigger-throttle action deliver precise control that feels perfectly natural. To these, the updated DX5 Pro 2021 transmitter adds a new steering wheel mechanism that increases the accuracy and precision of steering motion. UPDATED TRIM TABS Among the many ergonomic options available for tailoring the DX5 Pro 2021 transmitter to your personal touch are updated trim tabs, designed to make their operation easier while you drive your vehicle. ADVANCED PROGRAMMABILITY The DX5 Pro 2021 offers an impressive number of programming features and they're easy for anyone to use, thanks to the SimpleScroll programming interface that makes navigating menus and changing settings as simple as "scroll and click". You can program up to five drive modes per model to help dial in the perfect drag racing and lap times. Drive modes can also be used to program compatible AVC® (Active Vehicle Control) receivers to match your skill level, driving style, and terrain to provide predictable handling at every speed. There are multiple mixing setups, including Motor-On-Axle (MOA), plus ABS, Traction Control and 4-wheel steering, dual rates, expo and more. PROGRAMMING VIBE ALERTS You can select from a variety of vibe alerts for timer alarms, low battery voltage and other telemetry functions. Most of these can be set to go off when the voltage level or telemetry data exceeds specific values that you can easily define in the telemetry menus. Contents:1 piece

Absolute premium quality receiver battery from Top Tuning!Typical properties Voltage: 7.6V Capacity: 5500mAh Watt hours: 37.0Wh Cell Configuration: 2S1P Battery type: LiPo HV Maximum continuous discharge rate: 100C Maximum charge rate: 2C Maximum charge current: 11.0A Hard Case: Yes. Connector type: T-Plug Cable cross section: 12 AWG Balancer connection: JST_XH Dimensions: length: 96 mm Width: 47 mm Height: 25 mm Weight without cable: 212g Weight with cable: 229g Contents:1 piece

Genuine HT spare/option part.Version V2 with new design and quieter fans.Designed by professionals, this system is extremely versatile. The HT206AC / DC Duo 2 is very easy to use with the vertically angled 4.3" color touch display. The colorful app icons allow quick and clear navigation through the menu. The charger is cooled by a total of three powerful fans, which prevent overheating even at high outside temperatures. The heat dissipation is also increased by the aluminum housing.It is possible to charge two different batteries simultaneously with different charging settings. The HT206AC / DC Duo 2 provides a total of 400 watts, 200 watts per channel. Thus, each battery can be charged or discharged individually. The battery life can be increased with the balancing function.Specifications: AC input voltage: 110 - 240VDC input voltage: 10 - 30VDC output power: 5 - 27V, 0.1 - 20ACharging Power: 2 x 200W (400W) Charge Current Range: 0.1 - 20 A x 2Discharge current range: 0.1 - 5 A x 2 Max Discharge power: 25W x2 (50W) balancer current: 500mA / cellLilon / LiPo / LiFe / LiHV cell count: 1 - 6 cellsNiCd / NiMH battery cell count: 1 - 15 cellsPb Battery voltage: 2 - 20VMax. USB output: 5V / 2ABattery Memory: 8 profilesSub-function: digital power, balancer, IR testFirmware upgrade: External mini USB deviceSize: 195 x 143 x 70 mmWeight: 1072g Content: b> 1 x HTRC HT206AC / DC DUO charger 2 x T60 on banana connector adapter 2 x Balancing Board1 x Mains cable li> 1 x Instruction manual